Duali DQMINI SMART CARD & QR Reader User Manual

Duali Inc. SMART CARD & QR Reader

User Manual

DQ-MINI User Manual Copyright ⓒ 2016 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights. DUALi Inc. Document Version: 1.00 Last Revised Date: 16th. Oct 2018
DQ-MINI User Manual, Version: 1.00 www.duali.com 2 Revision History  2018.10.16 (Ver. 1.00) : First Release
DQ-MINI User Manual, Version: 1.00 www.duali.com 3 DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products. In addition, DUALi assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by DUALi. Composition of the information in this manual has been done to the best of our knowledge. DUALi does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below; Tel: +82 31 213 0074 e-mail : lab@duali.com FeliCa™ is registered trademark of SONY Corporation. Mifare® is registered trademarks of NXP Semiconductors
DQ-MINI User Manual, Version: 1.00 www.duali.com 4 CONTENTS 01. Introduction ................................................................................................................................................. 5 02. Specification ............................................................................................................................................... 5 03. Contents Confirmation .......................................................................................................................... 6 04. Appearance & Installation .................................................................................................................... 7 04.1 DQ MINI Feature & Dimension ....................................................................................................... 7 04.2 Mounting DQ Mini on the wall ........................................................................................................ 7 05. Connection Diagram ............................................................................................................................... 9 06. Operation & Usage ................................................................................................................................ 10 07. Output Format ......................................................................................................................................... 11 08. Function configuration (Communication setting) ................................................................ 12 08.1 QR Mode option set .......................................................................................................................... 13 08.2 QR Reading timeout ......................................................................................................................... 14 08.3 QR scan interval set ......................................................................................................................... 15 08.4 QR Maximum length set ................................................................................................................. 16 08.5 QR data send channel set ............................................................................................................. 17 08.6 RF Scan option set ........................................................................................................................... 18 09. Certifications ............................................................................................................................................ 19 10. Warranty & Service ............................................................................................................................... 20
DQ-MINI User Manual, Version: 1.00 www.duali.com 5 01. Introduction DQ-MINI is a wiegand access control reader based on 13.56 Mhz contactless card communication technology with stylish and rugged design. And it also can read QR code and 1D/2D barcode.It can be installed stably both indoor and outdoor. The ideal combination of NFC & QR reader could upgrade your application into another level. The reader is designed for wall mounting type of Access / Time attendance & parking management systems, and etc. 02. Specification Communication Interface RS-232 – 115200bps Operating Frequency 13.56MHz Credential Type Contactless > ISO 14443 TYPE A and B 1D/2D QR Recognizable spec UPC/EAN, UPC/EAn with Supplementals, Bookland EAN, ISSN, UCC Coupon Extended Code, Code128, GS1-128, ISBT 128, Code 39, PDF417, MicroPDF417, Composite Codes, Data Matrix, Maxicode, Qr Code, micro QR, Aztec Indicator LED (RED /BLUE) Magnetic Buzzer Power Supply 12VDC Linear supply recommended, 200 mA @ 12 VDC Operating Condition > -4º to 158ºF (-20º to 55ºC guaranteed) > 5% to 90% relative humidity Storage Condition > -4º to 158ºF (-20º to 80ºC) > > 5% to 90% relative humidity Housing Material PC (polycarbonate) Dimensions 99.3(mm) x 91.9(mm) x 88.4(mm) Cable length 1000(mm) Certifications FCC Certification (US), CE(EU)
DQ-MI www.dua03. NI User Mali.com Conten < DQ < ZiManual, Ve nts ConMini > g Board > rsion: 1.0 firmatio 0 on < Wall b < bracket > < USB to Ser ial cable> 6
DQ-MI www.dua 04. 04.1 04.2 NI User Mali.com Appear1 DQ MINI2 Mountindicator <Bracket >Field Manual, Ve rance & Feature &g DQ Mini Φ4mm Flat he rsion: 1.0 & Install& Dimensii on the wead screw0 ation ion wall CcIsty Connect the cable to DQ n case you shipped, youthe cable anyou need for power and cMINI’s termindon’t use theu could cut nd use only connection. 1/2d communicatinal block. e cable as itoff the end y the wire th 7D barcode detector on t is of hat
DQ-MI www.dua NI User Mali.com ce the providwall and 4mm Flat heathe device stly with 3*4 faution ot push the bracw has to be selee the reader to fould cause a proreading distancManual, Ve ded wall moufix it tightlyad) slightly and flat head maccket too hard whected dependingflat panel betweoblem to assemce can be short rsion: 1.0  unt bracket oy with screinsert to thechine screw.hen fixing it to thg on the wall’s men the wall mouble the device ifif the wall is ma0 on ew <Side Viee wall moun he wall. material and conunt bracket and f the bracket is ade of steel or m ew>nt from the tndition the wall. bent. metal. op as above e step. Fix i 8t
NI User Mali.com ConnePPRRWWPTManual, Ve ction DPIN NAME PWR_IN PWR_GND RS232_RX RS232_TX WGD_D0 WGD_D1 PWR_GND LED BEEP TAMPER rsion: 1.0 iagramPINY0 COLOR RED BLACK GRAY NK or JADEGREEN WHITE BLUE BROWN YELLOW VIOLET NUMBER 1 2 3 4 5 6 7 8 9 10 9
NI User Mali.com Operatper (TAMP)Readto accotherw D Control: ReadLED w zzer ControlRead Manual, Ve tion & U: er makes alacess controllewise (open) ser turns on Rwill be on. l: er makes bersion: 1.0 Usage arm when itser. In case oshows 5V. RED LED wheep sound wh0 s CASE is forof closed CAS hen LED Signhen BEEP S rced to openSE, TAMPERnal (BROWNignal (YELLO . It also makeR line (VIOLEN) with 0V. InOW) with 0V kes TAMPERET) shows 0n case of 5V,V. 10R signal V and BLUE 0
DQ-MI www.dua 07. [Data- - NI User Mali.com Output Fa format] Data forma Fir Da La Fir Da La <32bit> Da <64bit> DaManual, Ve Format at can be decrst Bit (Parityata [1-32] ast Bit (Parityrst Bit (Parityata[1-64] : IDFeliCMifareast Bit (Parity> ata[1-32] > ata[1-64] : rsion: 1.0 cided by sey) : Even p : ID numbey) : Odd py): Even paritD number(traa™ card – IDe® card – Cay) : Odd pa: ID number0 tting. (Referparity of bit 2er (transmissparity of bit 1ty of bit 2 ~ bnsmission daDM data(8byard serial nuarity of bit 34r(transmissio r to chapter2 ~ bit 17 ion data) 18 ~ bit 33 bit 33 ata) ytes) mber(4bytes~ bit 65 on data) 10) s)+0x00(4byt tes) 11 1
NI User Mali.com Functionging the reLi. You can ring to the cLi SDK ManLENH (Lentically calculaelds. Manual, Ve FeliCMifareon confader settingeasily changcommunicatioual.) ngth High) aated in the rsion: 1.0 a™ card –e® card – Cafiguratios is also poge the settinon frame beland LENL (dual card p0 – IDM data(8bard serial nuon (Comossible usingng of DQ-MINlow. (For mo(Length Lowprogram. Jus bytes) mber(4bytesmmunicg the SDK (NI by executore informatiow) value of st input corre s)+0x00(4bytcation se(DualCard pting the correon on dual ceach commesponding v tes) etting) rogram) proresponding ccards, pleasemunication frvalue on eac 12ovided by command e refer to rame are ch CMD/ 2
DQ-MINI User Manual, Version: 1.00 www.duali.com 13 08.1 QR Mode option set Following is the communication frame for QR mode setting. Since it is saved in flash memory after the first setting, the reader does not need to be set again. (115,200bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD DATA[0] DATA[1] LRC 0x02 0x00 0x02 0xE3 0x00 DATA[1] LENH^LENL ^ CMD ^ DATA[0]^DATA[1] DATA[1] State Description 0x00 Presentation mode QR scan mode change to Presentation mode 0x01 Manual Trigger mode QR scan mode change to Manual trigger mode (^: exclusive oring) Tip – To change the QR Mode to Presentation mode
DQ-MINI User Manual, Version: 1.00 www.duali.com 14 08.2 QR Reading timeout Following is the communication frame for same QR reading timeout setting. Since it is saved in flash memory after the first setting, the reader does not need to be set again. (115,200bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD DATA[0] DATA[1] LRC 0x02 0x00 0x02 0xE3 0x01 DATA[1] LENH^LENL ^ CMD ^ DATA[0]^DATA[1]^DATA[2] DATA[1] State Description 0x05~0x32 Timeout Parameter Set same QR reading timeout (Range: 05~0x32(=50)) Each numbers are automatically multiplied by DQ-MINI (^: exclusive oring) Tip – To set the same QR read timeout for 1.6s(1600ms)
DQ-MINI User Manual, Version: 1.00 www.duali.com 15 08.3 QR scan interval set Following is the communication frame for QR Scan interval option setting. Since it is saved in flash memory after the first setting, the reader does not need to be set again. (115,200bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD DATA[0] DATA[1] LRC 0x02 0x00 0x02 0xE3 0x02 DATA[1] LENH^LENL^CMD^ DATA[0]^DATA[1] ( ^ : exclusive oring) DATA[1] State Description 0x02~0x1E QR Scan interval QR Scan Interval setting(Range: 0x02~0x1E(=30)) Each numbers are automatically multiplied by DQ-MINI * THIS MODE IS ONLY WORK ON QR MANUAL TRIGGER MODE Tip – To set the QR scan interval to 0.5s(500ms)
DQ-MI www.dua 08.4Folme(110 NI User Mali.com 4 QR Maxilowing is themory after th5,200bps, 8 STX LEN0x02 0x0DATA[1] 0x01~0x10Tip – Manual, Ve imum lenge communicahe first settingdata, no parNH LENL 00 0x02 0 QR MaTo set the mrsion: 1.0 gth set ation frame fg, the readerrity, 1 stop biCMD 0xE3 State aximum leng(^: exclumaximum Q0 for QR maximr does not neit) DATA[0]0x03 gthusive oring)QR length to mum lengtheed to be setDATA[1]DATA[1]DQR Maximu0x016 setting. Sinct again. LENH^DATADescription m length sett01~0x10(=16 ce it is savedLRC ^ LENL ^ CMTA[0] ^DATA[ tting(Range: 6))I 16d in flash MD ^ 1] 6
DQ-MI www.dua 08.5Folme(110 ※NI User Mali.com 5 QR data lowing is themory after th5,200bps, 8 STX LEN0x02 0x0DATA[1] 0x02 ※ Default seTipManual, Ve send chae communicahe first settingdata, no parNH LENL 00 0x02 etting is RS-2p – To set thrsion: 1.0 annel setation frame fg, the readerrity, 1 stop biCMD D0xE3 (^:232 send ONhe QR data s0 for QR datar does not neit) DATA[0]D0x04 DRS-2exclusive orN send via Wie send channeed to be setDATA[1] DATA[1]escription232 Send ONing) egand and R nel set. Sinct again LRLENH^ LEDATA[0] N RS-232 ce it is savedRC ENL ^ CMD ^ ^DATA[1] 17d in flash 7
DQ-MI www.dua08.6Folthe (110 ※NI User Mali.com 6 RF Scanlowing is thefirst setting, 5,200bps, 8 STX LEN0x02 0x0DATA[1] 0x40 0x20 0x08 ※ Reading MTipManual, Ve n option see communicathe reader ddata, no parNH LENL 00 0x02 Mifare Type Ap – To set thrsion: 1.0 et ation frame fodoes not neerity, 1 stop biCMD D0xE3(^:A can not behe reader to 0 or RF Scan sed to be set ait) DATA[0]D0x06 DTYPFel156exclusive ore turned offread Mifare setting. Sinceagain DATA[1] DATA[1]escriptionE-B Scan Oica Scan ON693 Scan ONing) e type A , Fe e it is saved LRLENH^ LEDATA[0] N N N liCa™ and T in flash memRC ENL ^ CMD ^ ^DATA[1] TypeB 18mory after 8
DQ-MI www.dua09. Symb- - - - NI User Mali.com Certificbol Fed ElFCC STATCAUTION:responsibleequipment NOTE: ThiClass B digdesigned toresidential frequency instructionsthere is noinstallationtelevision ron, the usethe followin - Reorient - Increase - Connect twhich the r- Consult th*Please co Manual, Ve cations CommunaKorea deral Commuectrical wastTEMENT : Changes oe for complt. s equipmengital deviceo provide reinstallationenergy ands, may caus guarantee n. If this equreception, wer is encourng measureor relocate the separatthe equipmreceiver is che dealer oontact our sersion: 1.0 Descriptionute EuropeeCertificationunication Comte and electror modificatiance couldnt has been, pursuant teasonable p. This equipd, if not instase harmful ithat interfeipment doewhich can beraged to try es: the receivintion betweeent into an connected.r an experieervice team 0 n enne Marking Marking mmission Maronics equipmtions not exd void the usn tested andto Part 15 oprotection apment genealled and usinterferenceerence will nes cause hae determineto correct tng antennaen the equipoutlet on a enced radiom for the tec g arkingment xpressly appser's authord found to cof the FCC Ragainst harmerates uses sed in accoe to radio conot occur in armful interfeed by turninthe interfere. pment and rcircuit diffeo/TV technicchnical/ sale proved by thrity to operaomply with Rules. Thesmful interferand can radrdance withommunicatia particularerence to rang the equipence by onereceiver. rent from thcian for helpes supports he party ate the the limits fose limits arerence in a diate radio h the ons. Howevr adio or pment off ane or more ofhat to p. 19or a e ver, nd f 9
DQ-MINI User Manual, Version: 1.00 www.duali.com 20 10. Warranty & Service Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DQ MINI, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component against the provided manual. - Fault by the unqualified user’s own intention of repairs. - Adding certain functions or extension of system. PRECAUTIONS  Do not drop the device.  Do not modify, repair, or disassemble.  Do not expose directly to water, alcohol, benzene, etc for cleaning.  Do not expose directly to flammables.  Do not place or keep the device near flammables.  Keep the device away from excessive humidity and dust.  Do not place heavy objects on the device.  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
DQ-MINI User Manual, Version: 1.00 www.duali.com 21 *Please contact our service team for the technical/ sales supports. DUALi Inc. 1-309 Innoplex, 552 Woncheon-dong, Youngtong-gu, Suwon, Gyeonggi-do, South Korea 443-824 Tel : +82 31-213-0074 Fax : +82 31-213-0078 E-mail : lab@duali.com Web-site : http://www.duali.com

Navigation menu