Dwyer Instruments WP0082011 Probe Radio Board User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1576823
Application ID	5Pvry/Qd0KBQL484CGpO8A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.34kB (729208 bits)
Date Submitted	2011-11-08 00:00:00
Date Available	2011-11-08 00:00:00
Creation Date	2011-10-18 17:20:14
Document Lastmod	2011-10-24 16:07:48
Document Title	Users Manual

027001644700
02—20I512—00 UTA PROBE
DESCRIPTION:
REQUIRED
FCC ID LABEL
PRB MJSV
STEP #I
PLACE SERIAL NUMBER LABEL (22) INSIDE PROBE COVER (9) AS SHOWN,
THEN PLACE PROBE RADIO BOARD (7) INTO PROBE COVER (9).
§N9 I
FR NUMBER DESCRWON QTY HEM THE PRB RADIO PROBE BOARD IS SEEKING FCC LIMITED MODULAR APPROVAL. THE CIRCUIT BOARD IS A
7 SUB—ASSEMBLY THAT IS ADDED TO A DATA MEASUREMENT PROBE TO GIVE IT WIRELESS FUNCTIONALITY.
$3258 Gas; FEJQJHBEPRBfiEOZADIO BOARD I 2 THE DATA MEASUREMENT PROBE CONSISTS OF A SENSOR ASSEMBLY, A SENSOR MAIN BOARD AND A
CABLE USED TO PLUG INTO THE DATA COLLECTION DEVICE.
410849ro UHH PROBE COVER WITH BUTTON I 9
310711723 2—23 x I /2 SCR PLASTITE TORX 2 IO WHEN THE PRB IS ADDED TO THE DATA MEASUREMENT PROBE IT REPLACES THE CABLE AND BECOMES
310711724 2-23 x 5/3 SCR pLASTITE TORX 2 N THE INTERFACE TO THE DATA COLLECTION DEVICE. THE SENSOR MAIN BOARD PLUGS DIRECTLY INTO THE
201437430 UTA pROEE ASSEMBLY 1 12 PRB AND PASSES THE DATA MEASURED TO THE PRB WHICH THEN TRANSMITS THE DATA TO THE DATA
443876—00 UHH CATALOG ID & MODEL N0 LABEL 1 13 COLLECTION DEVICE. THE PRB CAN ONLY BE USED WITH DWYER DEVELOPED DATA MEASUREMENT
- - ' PROBES SUCH AS THE AP2, THERMO ANEMOMETER AIR VELOCITY AND TEMPERATURE PROBE OR THE
443879-00 CE LABEL W/ FCC INFO I I4 RP2, THERMO HYGROMETER HUMIDITY AND TEMPERATURE PROBE.
443557—02 LABEL DWYER LOCO DOMED I I5
340015-02 PLYET BAG 5 x 24 x (304 W I I6 THE INTERFACE BETWEEN THE SENSOR MAIN BOARD AND THE PRB IS A SIMPLE SERIAL AND POWER
, CONNECTION THAT IS CONSISTENT FOR ALL SENSOR ASSEMBLIES THAT ACCEPT THE PRB. THE UNIOUE
$2232-88 EfiELRYDWIfiimRTRg'SHg/ggw SOOMAH 1 (2 FORM FACTOR OF THE PRB IS ONLY COMPATIBLE WITH DWYER DESIGNED AND MANUFACTURED DATA
- - - MEASUREMENT PROBES AND THEREFORE CANNOT BE UTILIZED IN PRODUCTS NOT MANUFACTURED BY
42133740 HANDSTRAP CUP UHH I I9 DWYER INSTRUMENTS. ONLY THE DWYER INSTRUMENTS DATA COLLECTION DEVICE (UHH) CAN
350629700 HANDSTRAP 1 20 COMMUNICATE WITH THE FIRMWARE ON BOARD THE PRB TO GATHER THE DATA CAPTURED BY THE DATA
410898700 USB PORT ENCLOSURE UHH PROBE I 2I MEASUREMENT PROBE.
440025—00 SERIAL NUMBER LABEL I 22
34OOI4—OO POLY BAG 2 x 373/4 x .004 I 23
310711713 SCR 4720 x I /2 PLST PNH TORx I 25 LOOP EXCESS WIRE AND KEEP IT AWAY FROM PINCH POINTS
443971430 UHH PROBE pCB LABEL 1 26 TO PREVENT DAMAGE DURING ASSEMBLY
25
jfg
B - - 2 - -
7L
\ @ STEP (2
INSTALL PROBE ASS
EMBLY WITH SENSOR BOARD (I2) INTO SOCKET ON PROBE RADIO BOARD (7)
AND SECURE TO POST WITH SCREW (10)
KEEP EXCESS WIRE AWAY FROM PINCH POINTS
REQUIRED
EXTERIOR
FCC ID LABEL
TO PREVENT DAMAGE DURING ASSEMBLY
TOROUE
ALL FOUR SCREWS
so OZ/IN
STEP #5 (20I5I2700) 5c STEP #10 (20I5I27I0)
INSTALL PROBE BOTTOM (B) ONTO PROBE COVER USING SCREWS (IO) AND (II).
SCREW HANDSTRAP CLIP (19) To PROBE BOTTOM. PLACE LABELS (13), (I4) & (15)
IN RECESSED AREAS AS SHOWN. PLACE ASSEMBLED PROBE IN POLYBAG (I6) AND
AND PUT LABEL (17) ON BAG. PLACE HANDSTRAP (20) IN POLYBAG (23),
HNAL STEPS FOR ZOI5I27
STEP (3 (20I5I2—OO) & STEP (8 (20I5I2—IO)
UNDO LOOP IN BATTERY WIRES, REMOVE FOAM TAPE BACKER AND INSTALL LITHIUM BATTERY (IB) AND
PLUG THE CONNECTOR INTO THE SOCKET ON PROBE RADIO BOARD (7)
00 & fIO
POST FOR SLIDE
STEP (I4 (201512700) & STEP (IS (20I5127I0)
INSTALL USB PORT ENCLOSURE (2T) OVER POST ON BOTTOM HALF OF HOUSING
WIRELESS GUIDELINES IN ACCORDANCE WITH FCC:
CHANGES NOT EXPRESSLY APPROVED BY DWYER INSTRUMENTS, INC. COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS PRODUCT COMPLIES WITH FCC OEI BULLETIN 65 RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED ENVIRONMENTS
PURSUANT TO FCC I5.2I OF THE FCC RULES, CHANGES NOT EXPRESSLY APPROVED BY DWYER INSTRUMENTS, INC. MIGHT CAUSE HARMFUL
INTERFERENCE AND VOID THE FCC AUTHORIZATION TO OPERATE THIS PRODUCT.
CANADIAN GOVERNMENT GUIDELINES:
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
02—001644—00
® = CRITICAL DIMENSION
STANDARD TOLERANCES UNLESS NOTED:
ALL DECIMAL DIMENSIONS x COS
SCALE 1-1 ALL ANGLES i |
DATE NAME MATERIAL
104841 UHH WIRELESS
DWN BY
PRB ASSEMBLY DETAIL FINISH
KC FCC AGENCY APPROVAL DRAWING
CHKD
SHEET I OF 2 DWYER INSTRUMENTS, INC.
APPD
Na
MICHIGAN CITY. INDIANA 46360 U.S.A.
CHANGES BY/DATE
AcADzoDz
mm m. “ms and m ME. and mm. a; Mg" mm, mm m (A, mm. mm, A Om "Emmi MB. and “I
In A. mm“. . BAG. "mm a, M mm A. WM, “MW-m in “A"; A, m mam-DA and mm m L. “hm-m IA mm. 3
pm. I" “IA-mm Am I... "A." mm. M m mm“.
FR N002—OOIO44—OO
027001644700
02—201512—10 RH/TEMP PROBE
FR NUMBER DESCRIPTION QTY ITEM
410812710 FILTER CAP 1/4 NPSM 1 1
201406701 PCB DUCT SENS ZZ 1 2
201479700 UHH RH/TEMP PROBE PCB ASSY 1 3
201478700 UHH RH/TEMP SENSOR INTERFACE ASSY 1 4
443819—00 PROBE PCB GASKET 2 5
201437—20 UHH PROBE SENSOR CABLE I 5 STEP 1“
201477—00 ASSY UHH PROBE RADIO BOARD 1 7
410849700 UHH PROBE BOTTOM 1 8
410849710 UHH PROBE COVER WITH BUTTON 1 9
310711723 2728 X 1/2 SCR PLASTITE TORX 2 10
310711724 2728 X 5/8 SCR PLASTITE TORX 2 II
201505700 UHH RH TEMP PROBE TUBE ASSY 1 12
443876700 UHH CATALOG I.D. [1c MODEL N0. LABEL I 13
443879700 CE LABEL W FCC INFO I 14
443857702 LABEL DWYER LOCO DOMED 1 15 STEP #2
340018702 PLYET BAG 5 x 24 x (004 THK 1 16 INSTALL GASKETS (5) ONTO THE TOP AND THE BOTTOM
440745706 LABEL DWYER CARTON W CE 1 17 OF PROBE PCB ASSY (3) AT LOCATION SHOWN.
352122700 BATTERY, LITHIUM RECHG 3.75V, OOOMAH 1 18
421337710 HANDSTRAP CLIP UHH 1 19
350629700 HAND STRAP 1 20
410898700 USB PORT ENCLOSURE UHH PROBE 1 21
440028700 SERIAL NUMBER LABEL 1 22
340014700 POLY BAG 2 X 373 4 X .004 1 23
310711713 SCR 4720 X 1/2 PLST PNH TORX 1 25
443971700 UHH PROBE PCB LABEL 1 26
201512710
STEP 13
INSERT UHH PROBE SENSOR CABLE (6) INTO PROBE TUBE ASSEMBLY (12) ALL THE WAY
UNTIL THE CONNECTOR IS UP AGAINST THE END OF THE PROBE TUBE.
INSERT WIRES THROUGH HOLE IN PROBE PCB ASSY AND SOLDER WIRES AT LOCATIONS SHOWN
STEP #4
SLOWLY PULL CONNECTOR END OE CABLE UNTIL PROBE PCB IS FULLY SEATED INTO PROBE,
WHEN CORRECTLY INSTALLED THE END OF THE PCB WILL BE FLUSH WITH THE END OF THE TUBE HERE.
PRIOR TO STEP #7 CREATE A LOOP WITH EXCESS
WIRE TO KEEP IT AWAY FROM PINCH POINTS
REQUIRED
FCC ID LABEL
TO PREVENT DAMAGE DURING ASSEMBLY
NN: PRB MSW
FCC: zAerPDDezOII
STEP #6
PLACE PROBE RADIO BOARD (7) INTO PROBE COVER WITH BUTTON (9).
STEP #7
25
//
\_J_ ‘/‘
j m m
” w
, nu.
‘E y m I
I” u
fl"
TIIT
STEP #5
BROWN
RED
BLACK
ORANGE
INSTALL SENSOR PCB ASSY (2) INTO 6 PIN SOCKET IN TUBE ASSEMBLY,
THEN SCREW FILTER CAP (1) ONTO PROBE TUBE.
88
INSTALL SENSOR PCB ASSY (4) INTO SOCKET ON PROBE RADIO BOARD (7) AND SECURE TO POST WITH SCREW (IO)
THEN INSTALL COMPLETED PROBE ASSY FROM STEP #5 INTO COVER AND PLUG THE CONNECTOR INTO SOCKET ON
SENSOR PCB (4) AS SHOWN
SCALE 1 :1
@ : CRITICAL DIMENSION
STANDARD TOLERANCES UNLESS NOTED:
ALL DECINAL DIMENSIONS 1 005
ALL ANCLES t |'
DATE
10718711
DWN EV
KC
CHKD
APPD
NAME
UHH WIRELESS
PRB ASSEMBLY DETAIL
FCC AGENCY APPROVAL DRAWING
SHEET 2 OF 2
Acmzouz
MATERIAL
FINISH
DWYER INSTRUMENTS, INC.
MICHIGAN CITY, INDIANA 46360 USA
592m Tm- drfiwIN and ‘m
Fonin hr examI
Am»... and mm. H mm mm“ mm or, WWW. mm, ”mm Nsmwws. m m “I,
, "mm a, 1.“ mm a. WWW, MINI“, In “I"; L, m. mm" m m m b. mm W, mm. 3
mm In. mm mm o. m, corporation,
FR» NO027001644700
027001644700

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2011:10:24 16:07:48-07:00
Create Date                     : 2011:10:18 17:20:14-05:00
Metadata Date                   : 2011:10:24 16:07:48-07:00
Format                          : application/pdf
Document ID                     : uuid:65757665-ab34-44d4-a2be-6433b33a9a95
Instance ID                     : uuid:6d0b10ac-ff2e-4721-8df0-a0af873b8ce5
Page Count                      : 2

EXIF Metadata provided by EXIF.tools