Dymo Rhino Pro 5000 Users Manual ILPLight

PRO 5000 to the manual 1133c94c-8b5a-422d-8749-e6f358e09738

: Dymo Dymo-Rhino-Pro-5000-Users-Manual-366388 dymo-rhino-pro-5000-users-manual-366388 dymo pdf

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

User Guide

www.dymo.com/industrial

Tape Exit
AC Power Connector

LCD Display

Cutter Lever

Power Button
Navigation Key

Print Button
Hot Keys

Thumb Latch for Tape
Compartment

Backspace/Clear All

Escape/Backlight

Symbol Keys

Function/Shift

Function Keys
Enter/OK
Numeric Keys

Alpha Keys

Space Bar/
Symbol Key

Thumb Latch for
Battery Compartment

Figure 1 RhinoPRO 5000 Printer

2

About Your New Printer
With your new DYMO RhinoPRO™ 5000 printer,
you can create a wide variety of high-quality, selfadhesive labels. You can choose to print your
labels in many different sizes and styles. The
printer uses RhinoPRO Industrial label cassettes in
widths of 1/4” (6 mm), 3/8” (9 mm), 1/2” (12 mm),
or 3/4” (19 mm). RhinoPRO label cassettes are
also available in a wide range of materials.
Visit www.dymo.com/industrial for information on
obtaining tapes and accessories for your printer.

Warranty Registration
Please complete the warranty registration card and
return it to the appropriate customer service
address within seven days. Visit www.dymo.com/
industrial for details.

Getting Started
Follow the instructions in this section to get started
by printing your first label.

Power Supply

Press thumb
latch

Figure 2
2. Insert the batteries following the polarity
markings (+ and –).
3. Close the compartment door.
Remove the batteries if the printer will not be
used for a long period of time.

Connecting the AC Adapter
Connecting the AC adapter to the printer
disconnects the batteries as a power source.
To connect the AC adapter
1. Plug the power adapter into the power connector
on the top, left side of the printer.

The printer can operate on AC or battery power. To
save power, the printer will automatically turn off
after five minutes of inactivity.

Inserting the Batteries
The printer uses six AA batteries.
To insert the batteries
1. Press the thumb latch on the bottom of the
labelmaker to open the battery compartment
door. See Figure 2.

Figure 3
2. Plug the other end of the power adapter into a
power outlet.

Inserting the Tape Cassette
Your printer comes with one label tape cassette.
Visit www.dymo.com/industrial for information
about purchasing additional label cassettes.

3

To insert the tape cassette
1. Press the thumb catch on the right side of the
printer to open the tape cassette door.
The first time you use the printer, remove
the protective cardboard insert from between
the print head and pinch roller. See Figure 4.

Push down gently
Print Head
Pinch Roller

Remove
cardboard
insert

Figure 5

Tighten tape

Selecting a Language

= 6 mm
= 9/12 mm
= 19 mm

Set cassette switch

Figure 4
2. Set the cassette switch for the size of the tape
cassette that you are inserting. See Figure 4.
A notch in the cassette fits over the switch when
the cassette is in the correct position.
3. Make sure the tape and ribbon are taut across
the mouth of the cassette and that the tape
passes between the guideposts. If necessary,
turn the spool clockwise to tighten the ribbon.
4. Insert the cassette with the tape and ribbon
positioned between the print head and pinch
roller. See Figure 5.

4

5. Press firmly until cassette clicks into place. Make
sure tape and ribbon are positioned correctly.
6. Close the tape cassette door and press
to
turn on the power.

Several language-related features on the printer
are determined by the language setting, such as
availability of special characters, units of measure,
menu text, and so on.
By default the language is set to English.
To select a language
1. Press
+ SIZE .
2. Use and to select the language.
3. Press to set the language.
Select Universal as the language for the units
of measure to be in millimeters.

Printing Your First Label
You are now ready to print your first label.
To print a label
1. Enter text to create a simple label.
2. Press Print .

3. Cut the label using your thumb to lift the cutting
lever and pull it towards the back of the printer.
See Figure 6.

SIZE: XL

WRAP

FIXED

PPANEL

TBLOCK

BATTERY

LINE

CAPS

BCODE

VERT

Figure 7

Backlighting
When the printer is used in a low-light environment,
the display may become difficult to read. The
backlighting feature will light the display.
➤ Press
+ ESC to turn backlighting on and off.

CAPS Mode
Figure 6
4. Remove the label.
Congratulations! You have printed your first label.
Continue reading to learn more about the options
available for creating labels.

The CAPS key toggles capitalization on and off.
When CAPS mode is turned on, the CAPS
indicator is shown on the display and all letters that
you enter will be capitalized. The default setting is
CAPS mode on. When CAPS mode is off, all letters
entered appear in lower case.

Getting to Know Your Printer

Function Key

Become familiar with the location of the feature and
function keys on your printer. See Figure 1 on
page 2. The following sections describe each
feature in detail.

Power
The
button turns the power on and off. If no
keys are pressed after five minutes, the power is
switched off automatically.

LCD Display
The printer’s LCD display typically shows a row of
fourteen characters. However, you can enter up to
99 characters and spaces.
Hot key and feature indicators appear on the top,
side, and bottom of the display to indicate that a
feature is selected. See Figure 7.

The key is used to select the function or symbol
printed above a key. For example, when you press
SIZE , the Font size menu appears in the display;
however, if you press
+ SIZE together, the
Language menu appears.

Backspace Key
The
key removes the character to the left of
the cursor. +
clears all the current label text
and fixed-length settings. Text size and other
settings remain unchanged.

Escape Key
The ESC key returns you to the starting point from
within any function.

5

Navigation Key

Adding Symbols

You can review and edit your label using the
and arrows on the Navigation key.
You can also view menu choices using and ,
and then press to make a selection.

The printer supports the extended symbol set as
shown in Figure 9.

Designing Your Label
You can choose from a number of formatting
options to enhance the appearance of your labels.

Changing the Font Size
You can print the text on your label in five font
sizes: extra-small, small, medium, large, and extralarge. Figure 8 shows the Font menu.

XS S M L XL
Figure 8
The font size you can use depends on the
size of label tape that is installed in the printer.
To set the font size
1. Press SIZE .
2. Use the arrow keys to select a font size.
3. Press .

,

(

)

;

'

"

\

=

²

°

&

?

∅

∗

_

@

±

Figure 9
To add a symbol
1. Press +
. The first row of
symbols shown in Figure 9 is displayed.
2. Use the arrow keys to move to the desired
symbol. Use and to move horizontally along
a row of symbols. Use and to scroll
vertically through the rows of symbols.
3. When you locate the desired symbol, press
to add the symbol to your label.
In addition, commonly used electrical and datacom
symbols are available on individual keys for easy
entry. See Figure 10.

Creating Multi-Line Labels
You can create multi-line labels depending upon
the size of the label tape, as follows:
Tape Size
Number
of Lines

1/4”
3/8”
1/2”
3/4”
(6 mm) (9 mm) (12 mm) (19 mm)
1

2

2

4

To create a multi-line label
1. Type the text for the first line, and press .
2. Type the text for the next line.
3. Repeat these steps for each additional line.

6

Figure 10

Using International Characters
The printer supports the extended Latin character
set using RACE technology. Similar to using a
mobile phone keypad, typing a letter multiple times
within a very short time will scroll through variations
of that letter.

Once a label is saved to memory, you can recall
the label to print or edit.
To recall a label from memory
1. Press RECALL . The memory locations are
displayed.
2. Use the arrow keys to move to the memory
location that contains the label you want and
press .

Deleting a Label from Memory
When you no longer need a stored label, you can
delete it from memory.
To delete a label from memory
1. Press RECALL . The memory locations are
displayed.
2. Use the arrow keys to move to the memory
location that contains the label you want.
3. Press +
and then press to clear the
memory location.

FIXED

PPANEL TBLOCK

VERT

Figure 11

Printing Wrap-Around Labels

WRAP

You can create labels that wrap around a cable or
wire. The text is placed vertically or horizontally
along the width of the cable and repeated so that
you can read the label from any angle.
You can select from a number of different wire
gauges or cable lengths. Figure 12 for shows the
menu selections available.
CAT X/COAX

1/0-4/0 AWG

22-16 AWG

CABLE 3.0”

14-10 AWG (Default)

CABLE 4.0”

8-4 AWG

CABLE 5.0”

3-1 AWG

CABLE 6.0”

Figure 12
To print vertical wire wraps
1. Enter the text for the label.
2. Press WRAP .
3. Use the arrow keys to move
to the desired wire gauge or
cable size, and press .
4. Press Print .

123

Recalling the Label from Memory

BCODE
WRAP

123
123
123
123

You can save up to eight labels in memory.
To save a label
1. Type your label text.
2. Press SAVE to display the memory locations.
Each memory location is represented by a box.
Memory locations that contain a stored label are
filled and when the cursor is positioned over a
location, the contents are displayed.
3. Use the arrow keys to select an empty location.
4. Press to save the label.

You can create labels for specific applications
using hot keys. Hot keys are available for wraparound, fixed, patch panel, terminal block, and
barcode labels. See Figure 11.

123

Saving your Label

Using the Hot Keys

123

For example, if you repeatedly press the letter a,
you will see a à á â ã ä å and so on through all the
variations available. The order in which the
character variations appear depends on the
language you have selected to use.

Figure 13

7

123 123
123 123
123 123
123 123

Figure 15

Normally, the length of the label is determined by
the length of the text entered. However, you may
wish to make a label for a specific purpose that is a
fixed length regardless of the length of the text.
You can specify a fixed length for a label in 0.250”
(6 mm) increments between 0.500” (20 mm) and
40.000” (999.9 mm). The preset fixed length is 1.5”
(25 mm). Any change you make to the fixed length
setting remains in effect until you change it.
The amount of text that will print on the label
determines the minimum length of a label,
regardless of the fixed length you set manually. For
example, setting a fixed length of 0.50” for a label
with 20 characters would have no effect on the
label length.
To set the label length
1. Press FIXED .
2. Press to increase the length.
3. Press to decrease the length.
4. Press .

Printing Patch Panel Labels

PPANEL

Patch panel mode allows you to label a row of ports
on a patch panel. You select the distance between
ports, enter the desired text, serialize, and print.
The result is a long label with multiple, evenly
spaced text for each port. See Figure 15.

Printing Terminal Block Labels

TBLOCK

Terminal block labels are very similar to patch
panel labels; however, the text is printed vertically.
See Figure 16.
03
04

FIXED

To print a patch panel label
1. Enter the text for the first position on the label.
2. Press PPANEL .
3. Enter the distance between each label and
press . The default is 0.5” (12 mm) and the
value can be set in increments of 0.5” (12 mm)
up to 20” (480 mm).
4. Follow the directions in Serializing Your Labels
on page 9 to serialize the text that will print on
the label.

02

Figure 14

Printing Fixed Length Labels

8

01 02 03 04 05 06

01

To print horizontal wire wraps
1. Enter the text for the label.
2. Press + WRAP .
3. Use the arrow keys to move to
the desired wire gauge or
cable size, and press .
4. Press Print .

Figure 16
To print a terminal block label
1. Enter the text for the first position on the label.
2. Press TBLOCK .
3. Enter the distance between each label and
press . The default is 0.5” (12 mm) and the
value can be set in increments of 0.05” (1 mm)
up to 20” (480 mm).
4. Follow the directions in Serializing Your Labels
on page 9 to serialize the desired number or
letter that will print on the label.

Printing Vertical Labels

VERT

Single-line labels can be printed with the text
running vertically.
To print vertically
1. Enter the text for your label.
2. Press VERT and then Print .

Printing Barcode Labels

+ VERT .

The printer can generate two types of barcodes:
CODE-39 and CODE-128. You can only print a
barcode on 3/4” (19 mm) label tape.
The barcode will print horizontally along the label
with the text in small print underneath the barcode.
You can optionally add text before and after the
barcode.
To create a barcode
1. Enter the text you wish to appear before the
barcode on the label. (Optional)
2. Press + VERT .
3. Use the arrow keys to choose CODE-39 or
CODE-128, and press .
4. Enter the text for the barcode between the
barcode symbols ( ) and press .
5. Enter any text you wish to appear after the
barcode. (Optional)
6. Press Print .

Printing Options
You can choose to print multiple copies of the same
label, print serialized labels, or print a combination
of both.

Printing Multiple Copies
You can print up to 99 copies of the same label at
one time. When printing multiple copies, a dotted
cut-line is printed between each label.

To print multiple copies
1. Press + Print .
2. Press the arrow to increase the number of
copies to print. The default is 2 copies.
3. Press the arrow to decrease the number of
copies (maximum is 99).
4. Press or Print to begin printing.
You may notice a brief pause in printing
between each label for more complex formats.
When printing is finished, the number of copies to
print returns to 2.

Advancing the Label Tape
The default leader space for all labels is
approximately 5/16” (10 mm). To add additional
blank space to the beginning or end of your label,
you can feed the tape in 0.25” (6 mm) increments.
➤ Press
+ RECALL .

Serializing Your Labels
You can print serialized labels numerically or
alphabetically. Numbers can be incremented from
1-99 and letters from A-Z.
You can serialize any number or letter by placing
the cursor under the position to be incremented,
such as the number 2 in 123 or the letter B in ABC.
For example, with the cursor under the 2 in 123
and the increment #=3, the resulting labels would
print as 123, 133, and 143.
When the letter Z or the number 9 is reached
during serialization, a letter or number is added to
increase the increment. For example, Z increments
to AA and 9 increments to 10.
When a space is present in a string to be
serialized, only the numbers or letters after the
space are serialized.

9

To serialize your labels
1. Enter the text for your label.
2. Use the arrow keys to move the cursor under the
letter or number to serialize.
3. Press SERIAL .
4. Enter the number of labels you wish to print and
press or Print to begin printing. Enter 1-99 for
numbers and 1-26 for letters.
To print multiple copies of the same serialized
label, choose + Print and enter the number of
copies of each label to print. See Printing Multiple
Copies on page 9.

Adjusting Print Quality (Advanced)
Depending on the label material you choose, you
may need to lighten or darken the print on the label.
Adjusting the print head temperature allows you to
control the print quality (+/- 20).
To set the print head temperature
1. Press + SAVE .
2. Use the arrow keys to select the print head
temperature and press .
3. Repeat as necessary until you are satisfied with
the print quality.

10

Cleaning Your Printer
Your printer is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your printer from time to time to keep it
working properly. Clean the cutter blade each time
you replace the tape cassette.
To clean the cutter blade
1. Remove the tape cassette.
2. Press and hold down the cutter lever to expose
the cutter blade.
3. Use a cotton ball and alcohol to clean both sides
of the blade.
4. Release the cutter lever.
To clean the print head
➤ Clean the print head using the cleaning tool
located inside the tape compartment lid.

RhinoPRO Label Cassettes
The following industrial label cassettes are
available for the RhinoPRO 5000 printer.
Material Type

3/8”
1/2”
3/4”
(9 mm) (12 mm) (19 mm)

Length

Flexible Nylon
White

—

18488

18489

11.5’
(3.5 m)

Flexible Nylon
Yellow

—

18490

18491

11.5’
(3.5 m)

Permanent Polyester
White

18482

18483

18484

18.0’
(5.5 m)

Permanent Polyester
Metallic

18485

18486

18487

18.0’
(5.5 m)

Troubleshooting
Review the following possible solutions if you encounter a problem while using your printer.
Problem/Error Message

Solution

No display

• Ensure the printer is turned on.
• Replace discharged batteries.

Poor Print Quality

•
•
•
•

Poor Cutter Performance

Clean the cutter blade. See Cleaning Your Printer.

!!!!!!!!!!!!!

printer is jammed.

Replace discharged batteries.
Ensure tape cassette is installed properly.
Clean the print head.
Replace the tape cassette.

Remove cassette to clear the tape jam.
Replace the batteries.

Batteries are discharged.
Text Limit
Exceeded maximum number of characters in buffer.

Delete some or all of the buffer text.

Too many lines
Exceeded maximum number of lines allowed.

Select another format.

Enter numbers only
Non-numeric characters entered in error.

Enter only numeric characters for this selection.

Print failed
Undetermined printer error.

Check for tape jam, empty tape cassette, discharged
batteries, or other problems.

No tape
Tape cassette missing or empty.

Insert a new tape cassette

Battery low
Batteries almost discharged.

Replace batteries or connect AC power adapter.

Tape Jam
Motor is stalled due to tape jam.

• Remove jammed tape and replace tape cassette.
• Clean cutter blade.

If you still need assistance, contact DYMO Customer Support for your country. The Warranty booklet includes a list of
contact numbers for each country.

Documentation Feedback
We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our user guides. Please include the following information with your
feedback:
• Product name, version number, and page number
• Brief description of content (instructions that are inaccurate or unclear, areas where more detail is needed, and so on)
We also welcome your suggestions about additional topics you would like to see covered in the documentation.
Send email messages to: documentation@dymo.com
Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please
contact Customer Support.

11

This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the
following international standards:
US FCC Class B Compatibility
Safety - EN 60950, IEC 950, UL 1950
EMC Compatibility EN 61000 3-2/3 ; EN 61000 4-2/3/4/5/6/8/11; ENV 50204;
EU Immunity - EN 55024 & addendums A1, A2 Electromagnetic Compatibility (EMC) - Information Technology equipment, Immunity
Characteristics
Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Generic Standards - Section 3: Emission standard for
residential, commercial and light industrial environments.
Esselte is an ISO 14000 registered company. Plastic components of this printer have been marked to enable final disposal in a manner
that is sensitive to the environment.

DYMO Corporation
44 Commerce Road
Stamford, CT 06902-4561
(203) 355-9000
© 2003 DYMO Corporation. All Rights Reserved.
No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the
prior written consent of DYMO Corporation.
RhinoPRO is a trademark of DYMO Corporation. DYMO is a registered trademark of Esselte Corporation. All other trademarks are the
property of their respective holders.
927448 Rev 11/03



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Modify Date                     : 2003:11:24 09:37:34Z
Create Date                     : 2003:06:07 22:37:50Z
Page Count                      : 12
Creation Date                   : 2003:06:07 22:37:50Z
Mod Date                        : 2003:11:24 09:37:34Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Karen Evans
Metadata Date                   : 2003:11:24 09:37:34Z
Creator                         : Karen Evans
Title                           : ILPLight.fm
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools