DynaPoint H1300M Wireless Mouse User Manual USERS MANUAL

Dyna Point (Dong Guan) Electronic Wireless Mouse USERS MANUAL

USERS MANUAL

KGYW998BUSB User Manual 1. Connect the USB connector to the USB port on the system. 2. Connect the power connector from nodedock to the system. 3. Open the top cover of the mouse and insert 2 AA batteries. Take off the keyboard cover and insert 4 AAA batteries. Put back the battery doors. 4. Place mouse and keyboard in a distance of 1.5M to the nodedock. Within 10 seconds, press the synchornization button on the mouse and keyboard, then press the button on the receiver. The nodedock LED green light will start blinking if the synchornization functions normally. 5. Low Voltage Indicator: Mouse is in low voltage when the blue light is blinking in the mouse. Please change the battery when the top left LED indicator is blinking red light. 6. You can dock your MP3 player into the MP3 cup on the nodedock, all other 3 USB connectors can be insertted with any USB device. 7. You can insert any 1394 connector into the 1394 connection on the nodedock, and also insert the 1394 connector into the system. 8. Nodedock contains 6-in-1 card reader function. It is compatible with CF card, SM card, memory stick, SD card, MMC and Microdrive card. FCC Compliance and Advisory Statement. This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.

Navigation menu