DynaPoint H1300M Wireless Mouse User Manual USERS MANUAL

Dyna Point (Dong Guan) Electronic Wireless Mouse USERS MANUAL

USERS MANUAL

Download: DynaPoint H1300M Wireless Mouse User Manual USERS MANUAL
Mirror Download [FCC.gov]DynaPoint H1300M Wireless Mouse User Manual USERS MANUAL
Document ID496042
Application IDOdUUISbqwee4Xznphsb+lQ==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.97kB (12093 bits)
Date Submitted2004-12-13 00:00:00
Date Available2004-12-10 00:00:00
Creation Date2004-12-10 17:30:30
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2004-12-10 17:30:55
Document TitleUSERS MANUAL

KGYW998BUSB User Manual
1. Connect the USB connector to the USB port on the system.
2. Connect the power connector from nodedock to the system.
3. Open the top cover of the mouse and insert 2 AA batteries. Take off the keyboard
cover and insert 4 AAA batteries. Put back the battery doors.
4. Place mouse and keyboard in a distance of 1.5M to the nodedock. Within 10
seconds, press the synchornization button on the mouse and keyboard, then press the
button on the receiver. The nodedock LED green light will start blinking if the
synchornization functions normally.
5. Low Voltage Indicator: Mouse is in low voltage when the blue light is blinking in the
mouse. Please change the battery when the top left LED indicator is blinking red light.
6. You can dock your MP3 player into the MP3 cup on the nodedock, all other 3 USB
connectors can be insertted with any USB device.
7. You can insert any 1394 connector into the 1394 connection on the nodedock, and
also insert the 1394 connector into the system.
8. Nodedock contains 6-in-1 card reader function. It is compatible with CF card, SM
card, memory stick, SD card, MMC and Microdrive card.
FCC Compliance and Advisory Statement.
This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed or used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1) reorient or relocate the receiving antenna;
2) increase the separation between the equipment and the receiver;
3) connect the equipment to an outlet on a circuit different from that to which the receiver is
connected;
4) consult the dealer or an experienced radio/TV technician for help. Any changes or
modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. Where shielded interface cables have been provided
with the product or specified additional components or accessories elsewhere defined
to be used with the installation of the product, they must be used in order to ensure compliance
with FCC regulations.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f79ea15e-7158-4d30-988d-747cdd30780f
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2004:12:10 17:30:55+08:00
Create Date                     : 2004:12:10 17:30:30Z
Metadata Date                   : 2004:12:10 17:30:55+08:00
Document ID                     : uuid:33b1de1c-360e-423d-8546-3963a02c9db5
Format                          : application/pdf
EXIF Metadata provided by EXIF.tools
FCC ID Filing: P4XH1300M

Navigation menu