DynaPoint H7AG5001 Wireless Mouse User Manual 26 339 product spec

Download:
Mirror Download [FCC.gov]
Document ID	846965
Application ID	trPLBQFzWTBZlLNv6bxulQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.36kB (29492 bits)
Date Submitted	2007-09-25 00:00:00
Date Available	2007-09-25 00:00:00
Creation Date	2007-08-30 11:25:34
Producing Software	pdfFactory Pro 2.50 (Windows 2000 Professional Chinese)
Document Lastmod	2007-09-24 11:19:35
Document Title	26-339 product spec.doc
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	rd9

Dynapoint (Dong Guang )INC.
6th Industrial Park, Nan Qu, Shang Sha Cun, Chang An, Dong Guang, China 523869
Tel:86-769-8611988 Fax: 86-769-8611718
User Manual:
Please follow the steps as below:
1. Plug the receiver into PC USB port before using, the red indicator shines means the
connection between PC and receiver is OK.
2. Load the batteries to the mouse and click on the power switch then the optical LED will
be lightened.
3. Click the mouse ID setting button, its optical LED will be darkened and the low power
indicator (red color) will shine for once.
4. Click the receiver ID setting button, it will shine red slowly.
5. After ID setting of the mouse and receiver is finished, the red indicator of receiver will be
quickly shining and then stop shining which shows that the connection between mouse and
receiver is OK.
6. The red indicator of the receiver will shine while moving the mouse, and stop shining if
mouse not moving.
7. When the batteries carry low power (2.0V～2.3V), the red low power indicator of the
mouse will shine to remind users to change batteries.
8. After 8 minutes of not moving the mouse, its optical LED will be darkened (in sleep
mode).
9. Users should click the mouse buttons or scroll if tend to wake it up from the sleep mode.
18
Warning:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the
party responsible for compliance will void the user’s authority to
operate the equipment. Any change to the equipment will void FCC grant.
This equipment has been tested and found to comply with the limits
for a Class B digital device,pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The equipment compliance with FCC radiation exposure limit set forth for
uncontrolled Environment

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f20f43aa-8943-477a-b38e-4852f003dc67
Producer                        : pdfFactory Pro 2.50 (Windows 2000 Professional Chinese)
Create Date                     : 2007:08:30 11:25:34+08:00
Modify Date                     : 2007:09:24 11:19:35-07:00
Metadata Date                   : 2007:09:24 11:19:35-07:00
Creator Tool                    : pdfFactory Pro www.fineprint.cn
Document ID                     : uuid:58daf102-7d92-406d-a31f-401adc5f6c47
Format                          : application/pdf
Title                           : 26-339 product spec.doc
Creator                         : rd9
Author                          : rd9

EXIF Metadata provided by EXIF.tools