DynaPoint HZ5000 RF optical mouse transmitter User Manual HZ5000 English User s guide

Download:
Mirror Download [FCC.gov]
Document ID	460469
Application ID	anZdF9rp1W3YmEAS4hZNzg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.99kB (62325 bits)
Date Submitted	2004-08-17 00:00:00
Date Available	2004-08-16 00:00:00
Creation Date	2004-08-17 09:41:55
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-08-17 09:41:55
Document Title	Microsoft Word - HZ5000 English User's guide.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Jennifer

HZ5000 RF Wireless Optical Mouse User ’s Guide
1. Insert the batteries into the mouse. Ensure that the batteries are installed correctly
and that the (+) & (-) are correct.
2. Turn OFF the computer.
3. Plug in your USB or PS2 receiver into the USB or PS2 port and restart the
computer.
4. Press the ID switch on the receiver for 3 seconds.
5. You should see a red light flashing when the mouse is moved. It means that the
mouse and the receiver are communicating successfully.
6. If you don’t see a red light flashing or if the mouse is not responding, you may
need to remove the previous mouse driver(s) and restart the computer, and repeat
Step 4&5.
7. Once Windows is restarted, it will find new hardware and install the correct driver
you need to make your mouse function properly.
8. If the scrolling is not working but the mouse is, you may need to go to the
add/remove programs in your control panel and remove any previous mouse
software that may be installed on your computer and restart the computer again.
IMPORTANT: When doing ID setting users need to follow the instruction bellow,
a. Distance between mouse and receiver cannot be more than 0.5 meter.
b. Users need to press both ID switch within 5 seconds in order to complete ID
setting.
c. When charging batteries, users need to repeat Step 4&5.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible
for compliance will void the user’s authority to operate the equipment. Any change to
the equipment will void FCC grant.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:08:17 09:41:55-07:00
Modify Date                     : 2004:08:17 09:41:55-07:00
Page Count                      : 1
Creation Date                   : 2004:08:17 16:41:55Z
Mod Date                        : 2004:08:17 16:41:55Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Jennifer
Metadata Date                   : 2004:08:17 16:41:55Z
Creator                         : Jennifer
Title                           : Microsoft Word - HZ5000 English User's guide.doc

EXIF Metadata provided by EXIF.tools