DynaScan Technology PFB201 Control Board User Manual User maunal 20170208 For DI55

Download:
Mirror Download [FCC.gov]
Document ID	3285925
Application ID	Jd81/OEFdmRn0bGFP+9nRw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.78kB (309711 bits)
Date Submitted	2017-02-16 00:00:00
Date Available	2017-08-16 00:00:00
Creation Date	2017-02-10 11:27:29
Producing Software	PDFCreator 2.3.2.6
Document Lastmod	2017-02-10 11:27:29
Document Title	User maunal-20170208- For DI55
Document Creator	PDFCreator 2.3.2.6
Document Author:	Chun

User Manual
For
Android Control board
with
wireless module
Product:
Control Board
Model No.:
PFB201
This user manual pertains to Android player Main board with Wireless module. The Main board can b
e assembled in the Android based Advertising Media Player, liste as below;
Model
Model Description
DI551ST2
55” Monitor
Specifications:
Itrm
Description
Storage
Internal: 8GB NAND Flash, External: SD Card Slot
WiFi
802.11 b/g/n
Ethernet
RJ45 10/100M Fast Ethernet
Display Output
HDMI x 1
USB Input
USB Type A x 1
Card Reader
SD Card Slot x 1
Power Input
Power Jack (5V/ 2A)
LED Indicator
White (Power on),
Button/Switch
Reset
Internet Browser
Google Chrome
Video Format
JPG, H.264, H.263, DIVX, ON2VP, Mpeg1, Spark, Mpeg4,
VC-1, WMV9, MPEG2, Realvideo, SVC
Image Format
BMP,
Music format
MP3, WAV, WMA
White (Ethernet)
JPG, TIF, PNG, GIF
PCBA dimension: 900 X 114mm
Assemble method: the module will be screwed on the housing and used as a Main board for Android
based Advertising Media Player .
Input port:
1pc Power jack - for +5V/2A power input.
1pc USB TypeA- for USB mouse.
1pc SD Card Slot - for SD Card
Output port:
1pc jack for HDMI Cable.
1 pc jack for Computer Cable
1pc Antenna connector for 2.4G WiFi network
WIFI pin location and description :
FCC Statement:
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
End Product Labeling :
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following: "Contains FCC ID:
2AKWYPFB201 ”.
Information for the OEMs and Integrators
The following statement must be included with all versions of this document supplied to
an OEM or integrator, but should not be distributed to the end user.
1) This device is intended for OEM integrators only.
2) Please see the full Grant of Equipment document for other restrictions.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2017:02:10 11:27:29+08:00
Modify Date                     : 2017:02:10 11:27:29+08:00
Author                          : Chun
Subject                         : 
Page Count                      : 6
Page Layout                     : SinglePage
Page Mode                       : UseNone
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:59981b1c-f19c-11e6-0000-d12675dad2d3
Producer                        : PDFCreator 2.3.2.6
Keywords                        : 
Creator Tool                    : PDFCreator 2.3.2.6
Document ID                     : uuid:59981b1c-f19c-11e6-0000-d12675dad2d3
Format                          : application/pdf
Title                           : User maunal-20170208- For DI55
Creator                         : Chun
Description                     : 

EXIF Metadata provided by EXIF.tools