Dynabook DCE34608A Cellular Portable Telephone User Manual Users Instruction Manual

Download:
Mirror Download [FCC.gov]
Document ID	32815
Application ID	4wRMWxh/N43okvv2hfr9Ag==
Document Description	Users Instruction Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	252.15kB (3151882 bits)
Date Submitted	1999-04-16 00:00:00
Date Available	1999-04-26 00:00:00
Creation Date	1999-04-15 16:08:59
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	1999-04-15 16:37:51
Document Title	Users Instruction Manual
Document Creator	Acrobat 3.0 Scan Plug-in

APPLICANT: TRANSCEIVER TYPI-
TOSHIBA CORPORATION CJGDCE34608A
OPERATING INSTRUCTIONS
Wm
PAGE
1. GENERAL
1-1 General Description 2
12 Basic Specifications ~ 77" — ,,,_ 2
L3 List of Features 7— 777—7 3
2. FUNCTIONS
2-1 External View of the Unit — 4
2-2 Function of Keys and Controls ——~*— 5
2-3 LCD Readout Indication Items 77—7 6
3. OPERATION
3-1 Basic Operation , - , "7 7,3
3—2 Placing Telephone Calls 8
3-3 End to End Signaling — —7 8
3-4 Call Time Display - "--——~-—~>W ' —*> 9
4. INPORTANT SAFETY INFORMATION ~ ,_7, f 9
5. W'ARNING ' ' ' ' ' 9
PAGEJ T0§H\6A Emmi nfi
APPLICANT: TRANSCEIVER TYPE:
TOSHIBA CORPORATION CJBDCE34608A
1. GENERAL
1-1 GENERAL DESCRIPTION
This Cellular Handheld Portable Telephone is specifically designed for the Public Cellular
Mobile Communication Network System.
This Operating Instruction describes the Features and the Operating Method of the Cellular
Handheld Portable Telephone.
1-2 BASIC SPECIFICATIONS
This Cellular Handheld Portable Telephone's Basic Specifications are as follows.
Radio Frequency
Number of Channels
Duplex Spacing
Operating Temperature
Power Source
AMPS
Channel Spacing
Frequency Stability
RF Output Power
Receiver Sensitivity
Modulation/Demodulation
CDMA
Channel Spacing
Frequency Stability
RF Output Power
Receiver Sensitivity
Modulation/Demodulation
Transmitter 824 - 849MHz
Receiver 869 - 894MHz
832
45MHz
-20 to +60degrees Celsius
Li-Ion Battery 3.7Vx1‘ 950mAh
(Neg. GND)
30kl-Iz
+l‘2.5ppm
0.6W ERP (with Power Control)
-116dBm (12dB SINAD)
Voice : PM (with Compandor)
Data : FM
1,25MHz
+/-300Hz
043W ERP (with Power Control)
-104dBm
OQPSK / QPSK
PAGE 2 Tog-415A UHIHIT n
APPLICANT: TRANSCEIVER TYPE:
TOSHIBA CORPORATION CJBDCE34GO8A
1-3 LIST OF FEATURES
Items lDescription Note
Basic Features Push Button Dialing.
25x71 Dot LCD Display.
0 Power Indicator
~ Receiving Signal Strength Indicator
- Digital Mode Indicator
- IN USE Indicator
0 Roaming Indicator
0 Massage Indicator
0 Battery Level Indicator
Frequently called Numbers can be stored in Memory up to 99
Memories.
Memory Scrolling is available for easy Number Search.
Repertory Dialing
Repertory Memory
Scroll
Automatic Number
A Number can be stored automatically into the vacant
Entry= Re ertory Memory Address.
Placing Call History Last 10 dialed Number can be redialed
Automatic Reclial Dialed Number can automatically be redialed for four times
(5-sec. intervals) in case of Reorder wirement.
Only Last Digit entered can be cleared as well as whole Digital
Numbers can be dialed utilizing DTM'F (Touch Tone T“) even
while in a Telephone Conversation,
Transmit Audio can be muted for private Conversation.
You can always recall and confirm your Own Telephone
Number.
To display the Talk Time of the Last Call. |
To display the Cumulative Talk Time,
To clear the Timer.
Electronic Lock To prevent Unauthorized use of your Telephone,
Note: Touch Tone T“ is the register Trade Mark ofAT&T.
Last Digit Clear
End-to-End Signaling
Transmit Audio Mute
Display Own
Telephone Number
Functional Call Timer
Mmmomwm | x
APPLICANT:
TOSHIBA CORPORATION
2. FUNCTIONS
TRANSCEIVER TYPE:
CJGDCE34608A
2-1 EXTERNAL VIEW OF THE UNIT
Retractable
Whip Antenna
- Power Indicator
0 Receiving Signal Strength
Indicator
0 Digital Mode Indicator
0 IN USE Indicator
- Roaming Indicator
0 Massage Indicator
0 Battery Level Indicator
25x? 1 Dot Display
Send Kev
Store Kev
Massage Key
Digit Key
DC Jack
Incoming
Call Indicator
Earp icce
Earphone
Mic Jack
Data
Connector
End Key with
Power On/Ofi'
CLR Key
Voice Mail
Dial Key
Multi
Key
0 UpAarrow
0 Recall
Function
0 Function
o Down-arrow
Microphone
PAGE 4 Tom.“ ExmmT ||
APPLI CANT:
TOSHIBA CORPORATION
TRANSCEIVER TYPE:
CJSDCEZMGOSA
2-2 FUNCTION OF KEYS AND CONTROLS
Key-Board
Arrangement
Digit Keys
raj
(2493 @ To enter 3 Telephone Numbers, Nomesm
“Ll ©1173?) special characters (" or #) (1:5 is also used
@ Ea for One Touch Emergency feature.
Function Keys
To originate or receive a Call.
To terminate a Call and to turn the Unit ON/OFF.
To readout Text Massage or Voice Mail Notification from
memo
To be used with other Keys to activate several special
Features.
To control Earpiece audio level, Alert Tone and key Tone.
Also used as Up/Down-armw keys
To dial most frequently called Number from specially
assi ned Memo Address only by One Key stroke.
To store phone numbers in memory.
To clear the Digit fiom memory and Display.
PAefjjosH .
AI’I’LICAB
'l‘()SI'IIIIA CORPORATION
TRANSCEIVER TYPE:
(‘JGDCE3-IGOBA
23 LCD READOU’I‘ INDICATION I’I'I£I\IS
iim-Rmmf
Do rip! ion
Receiving Signal Stri-ngth Indicator. The numlwrr of lines indicates fhc
received Signal Strength, and Y is also used as 3 POWER ON Indicator.
Digital Mode Indicator. To indicate the phone is operating in digital
mode.
A Call is in proci‘ss.
The phone is out nl'tlie Home-Arm.
Moss ge indicntmz To indicate that Text Message are stored in memory
or V0 0 Messages are in your Voice Mailbox.
Buttery Level Indicator. Monitor the current battery voltage level.
Graphic fulldot matrix display with flexible font Sill} in 2 to 4 lino.
PAGE La WSW-M ermT do It
APPLICANT: TRANSCEIVER TYPE:
TOSHIBA CORPORATION CJGDCE34608A
3. OPERATIO N
3-1 BASIC OPERATION
mum
Press the ' ‘ switch. The Y indicator will light (all indicators will light momentarily and then
shows your Telephone Number, and 3 Tone will he heard).
Note: To turn the Unit OFF, press £33 again for about one second.
* Signal Strength Indicator
This enables you to know the Signal Strength in your Area.
The number of the shaded blocks indicates it, and four blocks is the maximum level. The display
will vary as your car moves. If the signal is not strong enough to originate a call. “no service" will
appear on the Dot display.
Mum
1. Press (9 then enter 3 Telephone Number.
2. Press 96, ii) then enter the Memory Address
(01 through 99).
MM
Press “ml, the display shows “Phone Book" then enter the Memory Address (01 through 99).
IZhgng ngk Sag
This feature will be useful in finding a certain Telephone Number by scrolling the Repertory
Memory Addresses
1. Press 
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:04:15 16:37:51
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1999:04:15 16:08:59
Page Count                      : 9

EXIF Metadata provided by EXIF.tools