Dynabook DCE46036A Tri-Mode Dual-Band Analog/PCS Phone User Manual CDM9155GPXFCC cover

Download:
Mirror Download [FCC.gov]
Document ID	243474
Application ID	o/V/bwugqCPTBCwDek14LA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.61kB (495128 bits)
Date Submitted	2002-05-16 00:00:00
Date Available	2002-06-18 00:00:00
Creation Date	2001-11-28 18:37:47
Producing Software	Acrobat PDFWriter 4.0 Windows
Document Lastmod	2002-05-10 10:54:58
Document Title	æ©¡CDM9155GPXFCC_cover.PDF
Document Creator	æ©¡Microsoft Word
Document Author:	æ©¡ogi

APPLICANT: TOSHIBA CORPORATION
TRANSCEIVER TYPE: CJ6DCE46036A
CDM-9500
OWNER'S MANUAL
Draft
May 2002
TABLE OF CONTENTS
SAFETY INFORMATION FOR
WIRELESS HANDHELD PHONES ...........…………........... 1
SAR INFORMATION ......................................…………....... 2
FUNCTIONS .............................................…………............. 3
GETTING STARTED ................................…………............. 5
BASIC OPERATION .......................................…………....... 6
Placing Calls .......................................………….............. 6
Receiving Calls ................................…………................. 6
OPERATING PROCEDURES ...........................…………....... 7
EXHIBIT Type “User Manual”
SAFETY
SAFETY INFORMATION
INFORMATION FOR
FOR
WIRELESS
WIRELESS HANDHELD
HANDHELD PHONES
PHONES
Read this information before using your handheld
portable Cellular Telephone.
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
FCC RF EXPOSURE INFORMATION
In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety
standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international
standards bodies. The design of this phone complies
with the FCC guidelines and these international standards.
Use only the supplied or an approved antenna. Unauthorized antennas, damaged antennas, modifications,
or attachments could impair call quality, damage the
phone, or result in violation of FCC regulations. Please
contact your local dealer for replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations
with the BC9500 belt-clip and LB9500 holster models, offered by Audiovox as an accessory to this phone,
and found to comply with FCC RF exposure requirements. Third-party belt-clips, holsters and similar accessories should be avoided, as they have not been
tested and may not comply with FCC RF exposure limits.
For more information about RF exposure, please visit
the FCC website at www.fcc.gov .
SAR
SAR INFORMATION
INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed
by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for
SAR are conducted with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions
and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for
this model phone when tested for use at the ear is 1.38 W/kg
and when worn on the body, as described in this user guide,
is 0.50 W/kg. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC requirements). While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/
oet/fccid after searching on FCC ID CJ6DCE46036A.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications & Internet Association (CTIA) web-site at http://phonefacts.net.
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
FUNCTIONS
External View
Earpiece
Earphone Mic
Jack
Graphic
Display
Soft Key 1
Message
Access Key
Send Key &
Voice
Activated
Dialing
Soft Key 2
Navigation
Key
Voice Mail &
Next Key
Speakerphone
Digit Keys
End Key with
Power ON/OFF
Clear Key
Power/Data
Connector
Microphone
LCD Display Icon
Signal strength icon.
You are on a call.
You are out of service area.
You are in a roaming service area.
The phone operates on digital mode.
The phone operates on digital mode.
You have new messages.
Vibrating alert is active.
The phone operates on hands-free mode.
Web security page.
Alert from Network.
Battery level icon.
Key Functions
Soft Keys:
Navigation Key:
To place or answer a call.
Voice Activated Dialing.
To end a call and to turn the
phone on/off.
To enter the message menu.
To activate Speakerphone mode.
To access your Voice Mail.
To clear digits or letters.
GETTING
GETTING STARTED
STARTED
Turning the Phone On/Off
Press and hold
. All the indicators and the display
will light momentarily, and a tone will be heard.
To turn the phone off, press and hold
Antenna Position
The antenna can be used in its fully extended or fully retracted position only. It is recommended that the antenna
should be fully extended for optimum performance and
signal strength or while operating in poor signal areas.
Signal Strength Icon (
The number of lines shown by this icon indicates the
strength of the signal your phone is receiving.
The number of lines may change as you move with the
phone to represent the changing signal strength.
If the signal is not strong enough to place a call,
“ ” will appear on the display.
Battery Level Icon
You can always monitor the battery charge condition
with the constant battery level icon.
BASIC
BASIC OPERATION
OPERATION
Placing Calls
To Place a Call
1. Enter the phone number.
2. Press
will appear on the display.
The icon
To Terminate a Call
Press
display.
. The icon
will no longer appear in the
Last Number Redial
1. Press the key under Redial to recall the last
number dialed.
2. Press
to place the call.
Receiving Calls
The phone sounds an alert or vibrates to alert you of
an incoming call. Also, the LED of the phone will flash.
To Receive a Call
When the telephone rings, press
will be displayed.
The icon
to answer the call.
Note: To mute the ringer or stop the vibrating, press
Caller ID with Name
This feature allows you to preview in your display the
number and name of the party calling you before you
answer the call.
OPERATING
OPERATING PROCEDURES
Never violate any of the following Rules and Regulations of the FCC when using your Cellular Phone. Such
violations are punishable by fine, imprisonment or both.
• Never use obscene, indecent, or profane language.
• Never use your Cellular Phone to send false distress calls.
• Never wiretap or otherwise intercept a phone call,
unless you have first obtained the consent of the
parties participating in the call.
• Never make any anonymous calls to annoy, harass, or molest other people.
• Never charge another account without authorization, to avoid payment for service.
• Never willfully or maliciously interfere with any
other radio communications.
• Never refuse to yield the line when informed that
it is needed for an Emergency Call. Also, never
take over a line by stating falsely that it is needed
for an emergency.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : .橡.Microsoft Word
Create Date                     : 2001:11:28 18:37:47
Title                           : .橡.CDM9155GPXFCC_cover.PDF
Author                          : .橡.ogi
Producer                        : Acrobat PDFWriter 4.0 Windows
Modify Date                     : 2002:05:10 10:54:58+09:00
Page Count                      : 8
Has XFA                         : No

EXIF Metadata provided by EXIF.tools