Dynabook MSDB02 SDIO Card type-B for Bluetooth User Manual
Toshiba Corporation SDIO Card type-B for Bluetooth
Dynabook >
User Manual
Confidential SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) TOSHIBA CORPORATION SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential Revision History Revision Draft 1.0 Date 2002-06-24 Comments Draft Draft 1.0a Draft 1.0c 2002-07-02 2003-02-27 Change notification statements. Change notification statements. Add some description statements. (*) The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential Feature Bluetooth™ SD card is an ultra small and thin card which has built-in antenna, Bluetooth™ function and SD/IO interface compliant with SDIO Card Specification. Bluetooth™ is a low-cost and low-power wireless communication standard for short range communication which uses 2.4GHz ISM band and GFSK modulation method. Bluetooth™ specification is standardized by Bluetooth SIG and it is industry-widely supported. SDIO Card Specification is a standard for small size IO devices. SDIO Card Specification is standardized by SD Association and it is also industry-widely supported. Bluetooth™ SD card can be used with any kind of devices which have SDIO card slot and software for Bluetooth SD card, e.g. PDAs, portable PCs and desktop PCs. Appearance Direction of insertion Installation When inserting this card into SD card slot, check the form of the connector and insert it surely. • Connect the Bluetooth™ SD Card to a PDA. This drawing is an example. As for the position where the Bluetooth™ SD card is connected, refer to the User’s Manual of PDA. PDA supporting the SD/IO Card SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential What you can do with the Bluetooth™ SD Card < Data communication between a PDA and a PC > PDA supporting the SD/IO Card PC with Bluetooth Please refer to the user’s manuals of PDA, PC and application software, with which Bluetooth™ SD card is used, for the details of usage and operation. SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential Specifications Model name Model No. Bluetooth™ specification SDIO Card Type-B for BluetoothTM SD-BT2 Bluetooth™ Ver.1.1 *1 Specification of electric Operating voltage : 3.1 to 3.6V Power Consumption : 100mA(MAX.) 50mA(AVG. in transmitting/receiving) In conformity with Bluetooth radio specification Transmission electric power class : Power class 3 [ maximum output : 1mW (0dBm)] Sensitivity of receiving : –70dBm SDIO Card Specification V1.0 SDIO Card Type-B Specification for Bluetooth™ 40mm-long x 24mm-wide x 2.1mm-thick A part of protrusion is 2.8mm-thick. RF, Baseband, LMP, L2CAP*2, SDP*2, RFCOMM*2, GAP*2, *2 SPP(Serial Port Profile) , SDAP(Service Discovery Application Profile) *2 RF specification Host-Card Interface Dimension Bluetooth™ Protocols/Profiles implemented in the Card *1 : Bluetooth Special Interest Group, Document number 1.C.47/1.1, February 22nd, 2001 *2 : It is supported when the card is in “SDIO Card for Bluetooth Type-B” mode. SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential Using this products • Using this products ***WARNING Do not perform disassembly, modifications or repairs. There is a danger of fires, electrical shock, damage to the unit, and injury. Do no remove the label and do not paste the other labels. Dismantling this product will invalidate the warranty and any other service plan. Do not use this unit in an area where people wearing pacemakers may be nearby (such as in a crowded train). Electrical signals may cause abnormalities in pacemaker operation. Those with a pacemaker should operate this system from a minimum distance of 22cm or more. Electrical signals may cause abnormalities in pacemaker operation. Do not use this unit near medical electronic equipment. Likewise, do not attach medical electronic equipment to this system. Electrical signals may cause abnormalities in the operation of medical electronic equipment. Do not use this unit near automatic doors, fire detection devices, or other automatic control devices. Electrical signals may affect these devices, leading to accidents caused by malfunctions. Do not use this unit in an aircraft or in a place where this unit may electromagnetically affect other devices. An electromagnetically wave may affect these devices and cause accidents by malfunctions. If this unit give any electromagnetic interference to other device during use of this unit, turn off the system that this unit is mounted. If the system is not turned off, eject this unit from the system. Electrical signals may affect these devices, leading to accidents caused by malfunctions. Do not put this unit into your mouth to avoid swallowing it. SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential *** CAUTION Do not use Do not use unit in the bath, or any other area where there is a chance of in bath submersion or high humidity. There is a risk of electrical shock. Warning Do not insert staples or paper clips into the unit. There is a danger of an electrical short, smoke, or fire. Warning Do not use unit in a location exposed to rain or mist. Rain or mist on the unit may cause fires or electrical shock. Warning If the unit is connected to a personal digital assistant, do not touch the SD card during or immediately following operation. There is a danger of burns resulting from high heat levels. Those with delicate skin should use caution. Warning Do not place cups, flower vases or other containers holding liquid near unit. There is a danger of electrical shock if liquids enter the unit. If liquids should enter the unit, turn the power off immediately, remove the plug from the electrical outlet, and bring the unit to the place of purchase or a nearby service center for inspection. SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential Notes on Operation Regarding the operating and storage environment for this unit Warning Do not place the unit in direct sunlight, a closed car, near a heating device, or any other location where high temperature is a possibility. This may cause damage to the unit, malfunction, or internal memory loss. Warning Do not place the unit in a place susceptible to extremely low temperatures. This may cause damage to the unit, malfunction, or internal memory loss. Warning Do not subject unit to rapid temperature changes. Dew formation may cause damage to the unit, malfunction, or internal memory loss. Warning Do not place unit in an extremely dusty location. This may cause damage to the unit, malfunction, or internal memory loss. Warning Do not use the unit in the following locations. Near a microwave oven, or areas with a risk of electrical shock or static electricity. Depending on the environment, electricity may not reach unit. Warning Do not place the unit in a place with risk of strong vibration. This may cause damage to the unit, malfunction, or internal memory loss. Warning When cleaning the unit, do not use benzene or paint thinner. This may cause damage or discoloration to the case. SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential Restrictions for Use • Restrictions for Use This product was not designed to be used with systems directly responsible for sustaining human life (*1). Avoid using this product with such systems. *1: Systems directly responsible for sustaining human life include the following: (Life support systems, systems for use in surgery, related medical equipment) When this product is to be used in installations responsible for human safety or the maintenance of public installations (*2), special transport, maintenance, operation, and wiring (*3) becomes necessary. Please contact our service center. *2: Installations responsible for human safety and public installations include the following. (Main control systems for nuclear power plants, safety installations in nuclear power plants, other systems responsible for maintaining public safety) (Mass transport systems, vehicle operation systems, or aerial control systems) *3: Special wiring refers to safety systems (fool proofing, failsafe system installation, redundant installation) installed in close consultation with a representative from our company. SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) Confidential ・FCC information FCC notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution CAUTION: End user can not modify this transmitter device. Any unauthorized modification made on the device could avoid the user's authority to operate this device. SDIO Card Type-B for Bluetooth™ SD-BT2 User's Manual Draft Rev. 1.0c (February 27, 2003) 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2003:03:03 13:27:18+09:00 Modify Date : 2003:03:03 13:27:18+09:00 Page Count : 10 Creation Date : 2003:03:03 04:27:18Z Mod Date : 2003:03:03 04:27:18Z Producer : Acrobat Distiller 5.0.5 (Windows) Metadata Date : 2003:03:03 04:27:18ZEXIF Metadata provided by EXIF.tools