Dynabook UWUSG06GWL 802.11b/g Wireless USB Adapter User Manual dwl120v F manual 102103

Toshiba Corporation 802.11b/g Wireless USB Adapter dwl120v F manual 102103

UserManual.wiki >

UWUSG06GWL User Manual

Manual

WUS-G06G-JT 802.11b/g Wireless USB Adapter User's Manual

2ContentsPackage Contents ................................................................................3Introduction............................................................................................4Features and Benefits ...........................................................................6Wireless Basics ....................................................................................7Installation Considerations ....................................................................7Getting Started ......................................................................................9Using the Configuration Utility ..............................................................12Networking Basics ..............................................................................26Troubleshooting...................................................................................39Technical Specifications ......................................................................42Contacting Technical Support ..............................................................44Warranty and Registration ...................................................................45

3TOSHIBA WUS-G06G-JT2.4 GHz Wireless G USB 2.0 AdapterAt least 64MB of memory and a 500MHz processorProperly installed and working USB ControllerWindows XP/2000 A computer or laptop with an available USB 2.0 portManual on CD-ROMQuick Installation GuideCradleContents of Package:Package ContentsIf any of the above items are missing, please contact your reseller.System Requirements:

4IntroductionThe TOSHIBA WUS-G06G-JT Wireless USB Adapter is an802.11b/802.11g high-performance,convenient Plug & Play USB 2.0 solution thatbrings wireless networking to your laptop or desktop PC.With a maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbomode) you can connect to a wireless network at home, at the office or at anywireless hotspot. Now you can stay connected wherever you are and whereveryou go.WUS-G06G-JT is Wi-Fi compliant, meaning that it can connect and interoperatewith other 802.11b or 802.11g Wi-Fi-compliant wireless routers, access pointsand adapters. WUS-G06G-JT connects to any available USB port on a laptopor desktop Windows -based computer and also includes a USB cradle. Withthe optional USB cradle, WUS-G06G-JT can be positioned virtually anywhereat a workstation to achieve the best available wireless signal reception - whetherthat workstation is in your office, on your deck or patio, by the pool, at the localcoffee shop, or in an airport terminal while waiting to board your next flight.The adapter works with Microsoft Windows XP and Windows 2000 operatingsystems to ensure that you’ll be up and running on a wireless network in just amatter of seconds.Using its default settings, the WUS-G06G-JT automatically connects to otherTOSHIBA wireless products as soon as it’s active. *Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and evironmental factors lower actual data throughput rate.WUS-G06G-JT has the newest, strongest and most advanced security featuresavailable today. When used with other 802.11 WPA (Wi-Fi Protected Access)and 802.1x compatible products in a network with a RADIUS server, the securityfeatures include:WPA: Wi-Fi Protected Access which authorizes and identifies users basedon a secret key that changes automatically at regular intervals. WPAuses TKIP (Temporal Key Integrity Protocol) to change the temporalkey every 10,000 packets (a packet is a kind of message transmittedover a network.) This ensures much greater security than the standardWEP security. (By contrast, the previous WEP encryptionimplementations required the keys to be changed manually.)

5For home users that will not incorporate a RADIUS server in their network, thesecurity for WUS-G06G-JT, used in conjunction with other WPA-compatible802.11 products, will still be much stronger than ever before. Utilizing thePre-Shared Key mode of WPA, WUS-G06G-JT will obtain a new security keyevery time it connects to the 802.11 network. You only need to input yourencryption information once in the configuration menu. No longer will you haveto manually input a new WEP key frequently to ensure security. With the WUS-G06G-JT, you will automatically receive a new key every timeyou connect, vastly increasing the safety of your communication.Introduction (continued)802.1x: Authentication which is a first line of defense against intrusion. In theauthentication process, the Authentication Server verifies the identity ofthe client attempting to connect to the network. Unfamiliar clients wouldbe denied access.

6Features and Benefits**3Environmental factors may adversely affect range.User-friendly configuration and diagnostic utilities.Supports Infrastructure networks via an access point andPeer-to-Peer communication in Ad-Hoc mode.Connects at up to 328 feet indoors3.1 year warranty.2Using a USB 1.1 port will adversely affect throughput.1Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual datathroughput will vary. Network conditions and environmental factors lower actual data throughput rate.Compact size for placement anywhere.Convenience of Plug & Play installation.Fully 802.11b/802.11g compatible.Powered by the USB port; no external power source is required.USB 2.0 standard2.Better Security with 802.1x and WPA - In addition to 64-,128-bit WEPencryption, you can also securely connect to a wireless network using802.1x for wireless authentication, as well as WPA (Wi-Fi ProtectedAccess) providing you a much higher level of security for your data andcommunication than has previously been available.Provides maximum wireless signal rate of up to 54Mbps(108Mbps1 in Turbo mode).Optimal wireless reception using its cradle (included). Position theWUS-G06G-JT almost anywhere in your workspace to achieve the bestreception possible.

7Wireless BasicsWireless users can use the same applications they use on a wired network.Wireless adapter cards used on laptop and desktop systems support the sameprotocols as Ethernet adapter cards.TOSHIBA wireless products are based on industry standards to provideeasy-to-use and compatible high-speed wireless connectivity within your home,business or public access wireless networks.TOSHIBA wireless products willallow you access to the data you want, when and where you want it. You will beable to enjoy the freedom that wireless networking brings.A wireless local area network (WLAN) is a computer network that transmitsand receives data with radio signals instead of wires. WLANs are usedincreasingly in both home and office environments, and public areas such asairports, coffee shops and universities. Innovative ways to utilize WLANtechnology are helping people to work and communicate more efficiently.Increased mobility and the absence of cabling and other fixed infrastructurehave proven to be beneficial to many users.People use WLAN technology for many different purposes:Mobility - Productivity increases when people have access to data in anylocation within the operating range of the WLAN. Management decisions basedon real-time information can significantly improve worker efficiency.Low Implementation Costs - WLANs are easy to set up, manage, changeand relocate. Networks that frequently change can benefit from WLANs easeof implementation. WLANs can operate in locations where installation of wiringmay be impractical.Installation and Network Expansion - Installing a WLAN system can be fastand easy and can eliminate the need to pull cable through walls and ceilings.Wireless technology allows the network to go where wires cannot go - evenoutside the home or office.Inexpensive Solution - Wireless network devices are as competitively pricedas conventional Ethernet network devices.Scalability - WLANs can be configured in a variety of ways to meet the needsof specific applications and installations. Configurations are easily changedand range from Peer-to-Peer networks suitable for a small number of users tolarger Infrastructure networks to accommodate hundreds or thousands ofusers, depending on the number of wireless devices deployed.

8Installation ConsiderationsWUS-G06G-JT lets you access your network using a wireless connectionfrom virtually anywhere within its operating range. Keep in mind, however, thatthe number, thickness and location of walls, ceilings, or other objects that thewireless signals must pass through, may limit the range. Typical ranges varydepending on the types of materials and background RF (radio frequency) noisein your home or business. The key to maximizing wireless range is to followthese basic guidelines:Keep your product away (at least 3-6 feet or 1-2 meters) from electricaldevices or appliances that generate RF noise.4Keep the number of walls and ceilings between WUS-G06G-JT andother network devices to a minimum - each wall or ceiling can reduceyour WUS-G06G-JT’s range from 3-90 feet (1-30 meters.) Positionyour devices so that the number of walls or ceilings is minimized.1Be aware of the direct line between network devices. A wall that is 1.5feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet(1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)thick! Position devices so that the signal will travel straight through awall or ceiling (instead of at an angle) for better reception.2Building materials can impede the wireless signal - a solid metal dooror aluminum studs may have a negative effect on range. Try to positionwireless devices and computers with wireless adapters so that thesignal passes through drywall or open doorways and not other materials.3Wireless Basics (continued)

9A wireless router - TOSHIBA DI-624A laptop computer with a TOSHIBA WUS-G06G-JTA desktop computer with a TOSHIBA WUS-G06G-JTA cable modem - TOSHIBA DCM-201 With its default settings, WUS-G06G-JT will connect with otherTOSHIBA products, right out of the box.Getting StartedThere are basically two modes of networking:Infrastructure – using an access point or router, such as the DI-624.Ad-Hoc – directly connecting to another computer, for Peer-to-Peercommunication, using wireless network adapters on each computer,such as two or more WUS-G06G-JT Wireless Network USB adapters.On the following pages we will show you an example of an InfrastructureNetwork and an Ad-Hoc Network.An Infrastructure network contains an access point or router. TheInfrastructure network example shown on the following page contains thefollowing TOSHIBA network devices (your existing network may be comprised ofother devices):

10You will need broadband Internet access (a cable or DSL-subscriberline into your home or office).Consult with your cable or DSL provider for proper installation of themodem.Connect the cable or DSL modem to your broadband router.(See the Quick Installation Guide included with your router.)Install the TOSHIBA WUS-G06G-JT Wireless USB 2.0adapter into an available USB port on your desktop computer.(See the Quick Installation Guide included with the WUS-G06G-JT.)Getting Started (continued)For a typical wireless setup at home (as shown above), please do the following:55555Setting up a Wireless Infrastructure Network111112222233333Install the TOSHIBA WUS-G06G-JT wireless USB 2.0adapter into an available USB port on your laptop computer.(See the Quick Installation Guide included with the WUS-G06G-JT.)44444 WUS-G06G-JTWUS-G06G-JT

11Getting Started (continued)Setting up a Wireless Ad-Hoc NetworkWhen assigning IP addresses to the computers on the network, pleaseremember that the IP address for each computer must be in the sameIP address range as all the computers in the network, and the subnetmask must be exactly the same for all the computers in the network.For example: If the first computer is assigned an IP address of 192.168.0.2with a subnet mask of 255.255.255.0, then the second computer can beassigned an IP address of 192.168.0.3 with a subnet mask of 255.255.255.0,etc.IMPORTANT: If computers or other devices are assigned the same IPaddress, one or more of the devices may not be visible on the network.IP AddressInstall the TOSHIBA WUS-G06G-JT Wireless USB 2.0adapter into the desktop computer. (See the Quick Installation Guideincluded with the product.)Set the wireless configuration for the adapters to Ad-Hoc mode, setthe adapters to the same channel, and assign an IP address to eachcomputer on the Ad-Hoc network.Install the TOSHIBA WUS-G06G-JT Wireless USB 2.0adapter into the laptop computer. (See the Quick Installation Guideincluded with the product.)DWL-G132Wireless G USB 2.0 AdapterWUS-G06G-JT

12Select the Wireless Networks tab.Uncheck the box in the properties windowthat enables windows configuration.TOSHIBA WUS-G06G-JT uses the Configuration Utility asthe management software. The utility provides the user an easy interface tochange any settings related to the wireless adapter. After you have completedthe installation of WUS-G06G-JT (refer to the Quick Installation Guide thatcame with your purchase) whenever you start the computer, the ConfigurationUtility starts automatically and the system tray icon is loaded in the toolbar(see illustration below.*) Clicking on the utility icon will start the ConfigurationUtility. Another way to start the Configuration Utility is to click onStart>Programs>TOSHIBA>TOSHIBA Utility.Using the Configuration UtilityIf you are using Windows XP, you can use either the Zero Configuration Utilityor the TOSHIBA Configuration Utility.If the icon does not display in the taskbar, then click onthis icon on your desktop to open.To use the TOSHIBA Configuration Utility with XP, right-clickon the wireless network icon in the taskbar in the lowerright-hand corner of your computer screen.In the window that appears, selectView Available Wireless Networksand click the Advanced button. Thescreen at right will appear.After you have done this, you can then use the TOSHIBAConfiguration Utility with XP by clicking on the TOSHIBAConfiguration Utility icon. *Configuration Utility iconin the system tray

13Using the Configuration Utility (continued)Link InfoSSID:The Service Set Identifier is the name assigned to the wireless network. Thefactory SSID setting is default.Status:Displays the MAC address of the access point or router to which theWUS-G06G-JT is associated.Frequency:802.11b indicates that the WUS-G06G-JT is communicating in the 2.4GHz band.Wireless Mode:Either Infrastructure or Ad-Hoc will be displayed here. (Please see the GettingStarted section in this manual for an explanation of these two modes.)

14Using the Configuration Utility (continued)Tx Rate:The default setting is Auto; Tx Rate settings are automatically determined fora maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbo mode).Channel:The default setting is Auto. The channel selection is automatically determinedby the WUS-G06G-JT.Signal Quality:Displays the signal strength and the link quality of WUS-G06G-JT’s wirelessconnection to the access point or router.Packet Count:Displays the statistics of the data packets that are transmitted and received.Encryption:You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.Rescan Button:Rescans for the strongest signal with the current SSID and associates withthat access point or router.Connection Info:When WUS-G06G-JT is connected to a wireless network, Connected will bedisplayed in this field.*Maximum wireless signal rate derived from 802.11g specifications. Actual data throughputwill vary. Network conditions and environmental factors lower actual data throughput rate.

15ConfigurationUsing the Configuration Utility (continued)Wireless Mode:SSID:Data Encryption:Service Set Identifier is a name that identifies a wireless network. Access pointsand wireless devices attempting to connect to a specific WLAN (Wireless LocalArea Network) must use the same SSID. The default setting is default.Click on the pull-down menu; select from the following options:Infrastructure - connecting to the WLAN using an access point. (This isthe default setting).Ad-Hoc – wireless mode used when connecting directly to a computerequipped with a wireless adapter in a Peer-to-Peer environment.Select Enabled or Disabled.

16Using the Configuration Utility (continued)Authentication:Keys 1-4:When you select WEP encryption, you will enter up to four WEP keys in thefields provided, using either Hexadecimal or ASCII format. From the keys youhave entered, select the default key by clicking on the button next to it.Choose one of the following modes:Open Authentication – WUS-G06G-JTis visible to all devices on the network.Shared Authentication – allowscommunication only with other deviceswith identical WEP settings.WPA – Wi-Fi protected access improvesupon WEP security. In conjunction witha RADIUS server and EAP (extensibleauthentication protocol), WPA ensuresthat only authenticated users access thenetwork.Click Apply to save changes.Authentication Config:When you enable IEEE 802.1X click on Authentication Config.The Advanced Security Settings screen will appear. See the following pagesfor more information.IP SettingsHexadecimal digits consist of the numbers 0-9 and the letters A-F.ASCII (American Standard Code for Information Interchange) is a code forrepresenting English letters as numbers from 0-127.IEEE 802.1X:Select Enabled or Disabled. 802.1x requires that a RADIUS server be includedin your network in order to authenticate users.Key Length:Select the key length and either ASCII (e.g., a word) or hexadecimal format.WPA-PSK – provides user authentication without a RADIUS server inthe network. PSK (Pre-Shared Key) provides authentication through useof a passphrase that is shared by the devices on the network. This is themost secure encryption available without a RADIUS server.IP Settings:When you click IP Settings in the Configuration window, the pop-up screenabove will appear. Configure the IP Settings in this window.

18Using the Configuration Utility (continued)Proxy Settings (continued)To use the same proxy server for allprotocols, select this option and enterthe IP address for the proxy server inthe HTTP field. Other fields will beunavailable. Enter the port number forthe proxy server.Use the same proxy server forall protocols:HTTP, Secure, FTP, Gopher,Socks:if you are not using the same proxyserver for all protocols, enter the proxyserver address, either in IP addressor domain name format and itscorresponding port, for each of theseprotocols.HTTP: Hyper Text Transfer Protocolis used to transfer files from a Web server onto a browser for viewing.FTP: File Transfer Protocol. FTP is most commonly used to upload anddownload files on the Internet.Gopher: Gopher is an early Internet protocol that organizes files in astructured list for database searching.Secure: HTTPS protocol is based on SSL (Secure Sockets Layer) technology.It is a protocol for transmitting private documents over the Internet using aprivate key to encrypt data. URLs that begin with HTTPS often use the protocolto securely obtain confidential information such as credit card numbers.Socks: Socks is a proxy server that provides a simple firewall. SocksV5 offersauthentication.Exceptions: To allow specific IP addresses to bypass proxy servers, enter theIP addresses here. You can also enter “wildcards” to allow a category of websiteto bypass the proxy servers. For instance, if you enter www.*.com, the browserwill bypass the proxy servers for most Websites.

20Using the Configuration Utility (continued)Fragmentation Threshold:This value should remain at its default setting of 2432. If you experience a highpacket error rate, you may slightly increase your Fragmentation Threshold withinthe value range of 256 to 2432. Setting the Fragmentation Threshold too lowmay result in poor performance.This value should remain at its default setting of 2432. If inconsistent data flowis a problem, only a minor modification should be made.RTS Threshold:Advanced (continued)

23Using the Configuration Utility (continued)Authentication > WPAAfter you click Authentication Config, the Advanced Security Settings screenwill appear. Please see the following page.Select the availablenetwork to which youwant to connect.ClickConfigure.Click AuthenticationConfig.Select WPA in theAuthentication field.

24Using the Configuration Utility (continued)Authentication > WPA > Advanced Security SettingsSelect the EAP typehere.Click Validate Serverif your authenticationserver requires it.Enter the User Name.Click Add and thewindow on the followingpage will appear.Click OK to save thechanges.Leave the UserCertificate field blank.EAP Type: Extensible Authentication Protocols (EAP-TLS, LEAP, EAP-TTLS,PEAP) allow devices on the network to request authentication from theRADIUS server in the network. All the devices on the network must use thesame EAP type when using a RADIUS server for authentication.Validate Server: Some RADIUS servers require that the Validate Serverfield be selected. Check this field if your RADIUS server requires validation.User Certificate: A certificate authority (CA) issues User Certificates toverify that a public key belongs to a specific individual or company. This fieldis not required here and is left blank.User Name: Enter the user name (admin) here.

25Using the Configuration Utility (continued)Authentication > WPA > Advanced Security Settings > AddEnter the IP address ofthe RADIUS server inyour network.Click OK to save thechanges.After entering the information and clicking OK in the dialog box above,the windowon the previous page will appear. Click OK to complete the WPA configuration.Authentication > WPA -PSKSuitable for the home user, WPA-PSK (WPA Pre-Shared Key) is a superiorform of security that does not require a RADIUS server in the network.To use WPA-PSK, enter a passphrase that is shared by all the devices on thenetwork.By using TKIP (Temporal Key Integrity Protocol), the security keys change atset intervals, creating a network that is more secure than one that utilizes WEPencryption alone.

26Using the Configuration Utility (continued)Authentication > WPA-PSKClickConfigure.Select WPA-PSK inthe Authenticationfield.Select the availablenetwork to which youwant to connect.WPA-PSK doesnot require aRADIUS Serverin the network.Click AuthenticationConfig.

27Using the Configuration Utility (continued)Authentication > WPA-PSK (continued)Enter the WPAPassphrase. All thedevices on thenetwork must sharethis samepassphrase in orderto communicate onthe network.AboutAdvanced Security SettingsThe About screengives you the MACaddress, UtilityVersion and the DriverVersion of theWUS-G06G-JT.Click OK.The configuration iscomplete.

28Using the Network Setup Wizard in Windows XPIn this section you will learn how to establish a network at home or work,using Microsoft Windows XP.Note: Please refer to websites such as http://www.homenethelp.comand http://www.microsoft.com/windows2000 for information about networkingcomputers using Windows 2000/Me/98SE.Go to Start>Control Panel>Network Connections.Select Set up a home or small office network.Networking BasicsWhen this screen appears, click Next.

29Please follow all the instructions in this window:Networking Basics (continued)Click Next.In the following window, select the best description of your computer. If yourcomputer connects to the Internet through a router, select the second optionas shown.Click Next.

30Enter a Computer description and a Computer name (optional.)Networking Basics (continued)Click Next.Enter a Workgroup name. All computers on your network should have thesame Workgroup name.Click Next.

31Please wait while the Network Setup Wizard applies the changes.Networking Basics (continued)When the changes are complete, click Next.Please wait while the Network Setup Wizard configures the computer.This may take a few minutes.

32In the window below, select the option that fits your needs. In this example,Create a Network Setup Disk has been selected. You will run this disk oneach of the computers on your network. Click Next.Insert a disk into the Floppy Disk Drive, in this case drive A.Networking Basics (continued)

33Please read the information under Here’s how in the screen below. After youcomplete the Network Setup Wizard you will use the Network Setup Disk torun the Network Setup Wizard once on each of the computers on yournetwork. To continue click Next.Networking Basics (continued)

34Please read the information on this screen, then click Finish to complete theNetwork Setup Wizard.The new settings will take effect when you restart the computer. Click Yes torestart the computer.You have completed configuring this computer. Next, you will need to run theNetwork Setup Disk on all the other computers on your network. After runningthe Network Setup Disk on all your computers, your new wireless networkwill be ready to use.Networking Basics (continued)

35Click Start (in the lower left corner of the screen).Right-click on My Computer.Select Properties.Select the ComputerName Tab in theSystem Propertieswindow.You may enter aComputer Descriptionif you wish; this field isoptional.To rename the computerand join a domain, clickChange.Networking Basics (continued)Naming Your ComputerTo name your computer in Windows XP, please follow these directions:

36In this window, enter theComputer name.Select Workgroup andenter the name of theWorkgroup.All computers on yournetwork must have thesame Workgroup name.Click OK.Checking the IP Address in Windows XPAll wireless adapter-equipped computers in your network must be in the sameIP address range (see Getting Started in this manual for a definition of IPaddress range.) To check on the IP address of an adapter, please do thefollowing:Right-click on theLocal AreaConnectionicon in the taskbar.Click on Status.Networking Basics (continued)Naming Your Computer

37This window will appear.Click the Supporttab.Click Close.Assigning a Static IP Address in Windows XP/2000Note: Many broadband routers will automatically assign IP addresses to thecomputers on the network, using DHCP (Dynamic Host Configuration Protocol)technology. If you are using a DHCP-capable router you will not need toassign static IP addresses.If you are not using a DHCP capable router, or you need to assign a static IPaddress, please follow these instructions:Go to Start.Click onControlPanel.Networking Basics (continued)Checking the IP Address in Windows XP

38Double-click on NetworkConnections.Click on Properties.Right-click on Local AreaConnections.Networking Basics (continued)Assigning a Static IP Address in Windows XP/2000

39 Input your IP address andsubnet mask. (The IPaddresses on yournetwork must be within thesame range. For example,if one computer has an IPaddress of 192.168.0.2, theother computers shouldhave IP addresses that aresequential, like 192.168.0.3and 192.168.0.4. Thesubnet mask must be thesame for all the computerson the network.) Input your DNS serveraddresses. (Note: If youare entering a DNSserver, you must enterthe IP address of theDefault Gateway.)The DNS server information will be suppliedby your ISP (Internet Service Provider.)Click OK.Click on InternetProtocol (TCP/IP).Click Properties.Networking Basics (continued)Assigning a Static IP Address in Windows XP/2000

40Checking the Wireless Connectionby Pinging in Windows XP and 2000Go to Start > Run > type cmd. A window similar to this one will appear. Typeping xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router oraccess point. A good wireless connection will show four replies from the wire-less router or access point, as shown.Networking Basics (continued)

411. How do I check to see that the drivers for the WUS-G06G-JT are installed properly?Click DeviceManager.Select theHardwareTab.TroubleshootingGo to Start > MyComputer >Properties.This chapter provides solutions to problems that can occur during theinstallation and operation of WUS-G06G-JT. Read the following descriptions ifyou are having problems. (The examples below are illustrated in Windows XP. Ifyou have another operating system, these solutions will still apply although theappearance on your computer screen may differ.)

42Troubleshooting (continued)Double-click onNetwork Adapters.Right-click onTOSHIBA WUS-G06G-JTWireless USB Adapter.Select Properties tocheck that the driversare installed properly.Look under DeviceStatus to check thatthe device is workingproperly.Click OK.TOSHIBA WUS-G06G-JT Wireless USB AdapterTOSHIBA WUS-G06G-JT Wireless USB AdapterTOSHIBA WUS-G06G-JT Wireless USB Adapter

43Troubleshooting (continued)2. What variables may cause my wireless products to lose reception?TOSHIBA products let you access your network from virtually anywhere you want.However, the positioning of the products within your environment will affect thewireless range. Please refer to Installation Considerations in the WirelessBasics section of this manual for further information about the mostadvantageous placement of your TOSHIBA wireless products.3. Why does my wireless connection keep dropping?4. Why can’t I get a wireless connection?If you have enabled encryption on the WUS-G06G-JT, you must also enableencryption on all wireless devices in the network in order to establish a wirelessconnection.If you are using 2.4GHz cordless phones, X-10 equipment or other homesecurity systems, ceiling fans, and lights, your wireless connection willdegrade dramatically or drop altogether. Try changing the channel onyour router, access point and wireless adapter to a different channel toavoid interference.Keep your product away (at least 3-6 feet) from electrical devices thatgenerate RF noise, like microwaves, monitors, electric motors, etc.The encryption settings are: 64- or 128-bit. Make sure that theencryption bit level is the same on the router and the WUS-G06G-JT.Make sure that the SSID on the wireless router (if you have one in yournetwork) and the WUS-G06G-JT are exactly the same. If they are not,wireless connection will not be established. The default SSID is default.

44IEEE 802.11gTechnical SpecificationsUSB 2.01Standard80% maximum, non-condensingHumidity:Antenna Type:Omni-directionalModulation Technology:54, 48, 36,24, 18, 11, 9, 6 5.5, 2, 1Mbps (with Automatic Fallback)Data Rates:2.4GHz to 2.462GHzFrequency Range:Indoors: Up to 328 feet (100 meters)Range:2IEEE 802.11bUSB 2.0Bus TypeTemperature Operating: 0ºC to 40ºC (32ºF to 104ºF) Storing: -20ºC to 75ºC (4ºF to 167ºF)Orthogonal Frequency Division Multiplexing (OFDM)Complimentary Code Keying (CCK)64-, 128-bit WEPWPA - Wi-Fi Protected AccessSecurity:CSMA/CA with ACKMedia Access Control:Outdoors: Up to 1,312 feet (400 meters)2 - Environmental factors may adversely affect wireless signal range1 - Using a USB 1.1 port will adversely affect range2.412 GHz to 2.462GHz

45Technical Specifications (continued)Receiver Sensitivity:L = 3.3 inchesW = 2.1 inchesH = 0.2 inchesPhysical Dimensions:5.5Mbps CCK2Mbps QPSK1Mbps BPSK11Mbps OFDM9Mbps OFDM6Mbps OFDM24Mbps OFDM18Mbps OFDM12Mbps OFDM54Mbps OFDM48Mbps OFDM36Mbps OFDM25dBm ± 2dBTransmitter Output Power:0.021 lb. (4.4g)Weight:1 yearWarranty:FCC part 15bCertifications:TOSHIBA products can transfer data up to 5 times faster than standard 802.11b networks. They are also interoperable with 802.11b compliantwireless devices.Operating frequency:  2412~2462 MHz  11 Channels for Taiwan 17dBm ± 2 dB (Average Power)FCC 15B/C、IC、DGT

根據交通部低功率管理辦法規定：第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. This equipment has been SAR-evaluated for use in laptops (notebooks) with side slot configuration.

Industry Canada Statement Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu