Dynacord Pm2600 Users Manual Cover English MI 2002

PM2600 to the manual a92d1c3a-6a56-75b4-fd9b-57e4c7446af0

2015-02-02

: Dynacord Dynacord-Pm2600-Users-Manual-426324 dynacord-pm2600-users-manual-426324 dynacord pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadDynacord Dynacord-Pm2600-Users-Manual- Cover English MI 2002  Dynacord-pm2600-users-manual
Open PDF In BrowserView PDF
Xa2600 / PM 2600
The heart of any Xa-system, PowerMax system or of a
freely configured 2-way system is one of our 2600 Series
Controller Amps.
Based on the topology of the “LINEAR PRECISION” Series
power amps, these system power amplifiers offer an output power capacity of 2,600 watts (RMS) each, when
operated in active 2-way mode. Both models provide integrated active frequency crossovers, several processorcontrolled functions and extensive protection circuitry.
The provided output power is:
2 x 700 watts Lo
2 x 600 watts Hi
The multitude of processor functions includes our patented
LPN-filters, the ”Thermal Brain Circuit" protection, and an
APC-controlled limiter for each amplifier channel.
Additional protection circuitry prevents thermal overload,
HF, DC or short-circuit in the output stage. The Linear
Precision Series' Back-EMF-protection circuitry contributes
to the overall operational stability.

Originally designed for the Xa-Systems, this system power
amplifier offers various adjustment features and reveals its
true versatility when being used with any other Hi/Mid/
Sub woofer speaker system combination.
The Mid/Hi-Equalizer with integrated horn-equalization at
12 kHz can be optimally used with medium or long-throw
Mid/Hi speaker systems.
Separating the LF-range from the rest of the audio signal,
an active Butterworth/Constant-Power-Response-Crossover provides a crossover frequency at 160 Hz with
18 dB/oct. slope. A 12 dB/oct. Lo-Cut filter cuts ultra-low
frequencies below 30 Hz.

P

O

W

E

R

A

M

The integrated bass equalizer is meant to be used for live
concerts. The 4 kHz Dip-switched EQ allows the adjustment of several different cabinets to match varying acoustical environments. A 12 dB/oct. Lo-Cut filter attenuates
ultra-low frequencies.
• LPN Processor Function
The patented LPN-Processors (Low Pass Notch Filter)
electronically neutralize speaker-typical transient response
distortion already within the power amp.
• APC Processor Function
Four super-high-speed audio processors continuously
monitor the amplifier's internal and external operational
state, activating the four internal dynamic limiters on the
occurrence of any non-linear operation.
• TBC Processor Function
Four Thermal-Brain circuits simulate the thermal model of
a typical voice coil and limit the energy fed to the speaker
components during impending overload.

Dual Active 2-Way
Processed Precision Power Amplifier
2600 Watts

P

L

I

F

I

E

R

S

31

PM2600
PM2600
Dual Active 2-Way
”PowerMax“ Controlled Amplifier
2600 Watts
Basically, the PM2600 can drive any active 2-way system
that consists of full-range cabinets and sub woofers. The
integrated frequency crossover operates in PowerMax
function mode and has been optimised for those combinations. Intelligently configuring system components
leads to outstanding results. For more details, please refer
to the PowerMax Systems and PowerMax230 Controller
descriptions.

Crossover Section

Xa2600

PM2600

Crossover Type

3rd Order BU, Constant-Power-Response
Stereo active 2-way
160 Hz
12dB/octave, 30Hz at -3dB ref. 1kHz

PowerMax12*, Stereo active 2-way

Crossover Frequency
Lo-Cut

110 Hz
12dB/octave, 25Hz at -3dB ref. 1kHz

*Patent pending

Xa2600, PM2600
Load Impedance
Maximum Midband Output Power, THD = 1%, 1kHz, 60Hz
Rated Output Power, THD < 0.1%
Maximum Single Channel Output Power,
Dynamic-Headroom, IHF-A
Maximum RMS Voltage Swing, THD = 1%
Frequency Response, -3dB, ref. 1kHz, Lo-Cut
Minimum Load Impedance
Input Sensitivity at rated output power @ 4Ω
Maximum Input Level
THD at rated output power, MBW =80kHz
Crosstalk Attenuation
Slew Rate
Power Bandwith, THD = 1%, ref. 1kHz, half power @ 4Ω
Input Impedance, 20Hz ... 20kHz, balanced
Damping Factor
Signal-to-Noise Ratio, A-weighted
Power Requirements
Power Consumption at 1/8 maximum output power @ 4Ω
Protection
Cooling
Safety Class
Dimensions (W x H x D), mm
Weight

HI-Channels
8Ω
4Ω
380W
700W
300W
600W
400W
750W

LO-Channels
8Ω
4Ω
380W
700W
350W
700W
400W
750W

58.7V
25Hz ... 45kHz
2.5 Ω
0dBu (775mV)
+21dBu (8.7V)
< 0.05%
> 60dB
30V/µs
10Hz ... 50kHz
20kΩ
> 300
> 100dB
230V, 50Hz ... 60Hz
1800W
Audio limiter (APC), TBC, High temperature,
DC, HF, Back-EMF, Peak current limiter,
Inrush current limiter, Turn-on delay
Front-to-rear, 4-stage-fans
I
483 x 177 x 426
30kg

Amplifier at rated conditions, all channels driven, 8Ω loads, HI-Channel rated at 1kHz, LO-Channel rated at 60Hz unless otherwise
specified. Note: 0dBu = 0.775V

32

P

O

W

E

R

A

M

P

L

I

F

I

E

R

S



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Modify Date                     : 2002:06:12 17:29:00+02:00
Create Date                     : 2002:06:12 17:27:11+02:00
Title                           : Cover english MI 2002
Author                          : Pletz
Creator                         : QuarkXPress.: LaserWriter 8 D1-8.7
Producer                        : Acrobat Distiller 5.0.1 f.r Macintosh
Page Count                      : 2
Mod Date                        : 2002:06:12 17:29:00+02:00
Creation Date                   : 2002:06:12 17:27:11+02:00
Metadata Date                   : 2002:06:12 17:29:00+02:00
Has XFA                         : No
EXIF Metadata provided by EXIF.tools

Navigation menu