Dynacord PM 2600 PowerMax Systems E User Manual To The 1fd78996 72a2 Ba54 4970 De84b202e8fd
User Manual: Dynacord PM 2600 to the manual
Open the PDF directly: View PDF 
.
Page Count: 4
5
&
Systems
ENGLISH
3
3
PowerMax 3 system: F5 & F120 on a PM2600
F5
F120
F5 & F120
System
2 x F120
2 x F5
PM2600
4 x Speakon system cable 15m
2 x loudspeaker stand poles
System
3
PowerMax 3 system - the
direct successor of the legendary
P3 Systems - consists of two 12“
2-way cabinets F120, two 15“ sub
woofers F5, one system power
amplifier PM2600, four system
cables and two loud-speaker stand
poles. So, this compact, active
2-way system is ready for operation.
The system power amplifier in-
cludes the PowerMax controller
and provides 2 x 700 W in the
bass and 2 x 600 W in the Mid/Hi
range. The system cabling ensures
quick and easy installation and hig-
hest operational reliability. It is pos-
sible to operate two Mid/Hi cabi-
nets and two sub woofers per ste-
reo side on a single PM2600.
3 year warranty.
THE
requirements for modern
audio installations regarding
their sound pressure level, coverage and sound quality can
only be achieved using active multi-component loudspea-
ker systems where the audio signal’s individual frequen-
cy ranges are separately amplified and reproduced.
2-way installations with additional
sub woofer systems probably
offer the best price-performance
ratio. The low frequency range of the audio signal is
reproduced by the sub woofers while high-quality full
range cabinets take care of the Mid/Hi frequencies and
vocals.
HIGHEST ACTIVE
5
PowerMax 5 system: F8 & F150 on a PM2600
System
F8 & F150
F150
F8
2 x F150
2 x F8
PM2600
4 x Speakon system cable 15m
2 x loudspeaker stand poles
System
5
PowerMax 5 system - the
direct successor of the legendary
P5 Systems - consists of two 15“
2-way cabinets F150, two 18“ sub
woofers F8, one system power
amplifier PM2600, four system
cables and two loud-speaker stand
poles. So, this compact, active
2-way system is ready for operation.
The system power amplifier in-
cludes the PowerMax controller
and provides 2 x 700 W in the
bass and 2 x 600 W in the Mid/Hi
range. The system cabling ensures
quick and easy installation and hig-
hest operational reliability. It is pos-
sible to operate two Mid/Hi cabi-
nets and two sub woofers per ste-
reo side on a single PM2600.
3 year warranty.
THE
of the essential advantages when using active
2-way systems with additional sub woofers
lies in the fact that the vocals are not divided between
several speaker systems. This, in return, offers more
convenience when adjusting the sound system. Different
than with active 3- or 4-way configurations – complicated
analyzing and measuring sound fields are not necessary.
small stages or rooms, using only a monaural sub
woofer is absolutely sufficient, since the locating
of low-frequency sound is merely impossible under these
conditions. For bigger stages it is indispensable to use sepa-
rate sub woofers for both sides. Otherwise, the level dif-
ference between bass and treble would result in an
audible degradation of the overall sound. Of course, incor-
porating a centrally located sub woofer can additionally
improve the sound quality.
ON
ONE
2 x F120 12“ Mid/Hi cabinet
2 x F5 15“ sub woofer
1 x PM2600 system power amplifier
4 x PSS 415 Speakon system cable 15 m
2 x PCL 880 loudspeaker stand poles
System33System55
2 x F150 15“ Mid/Hi cabinet
2 x F8 18“ sub woofer
1 x PM2600 system power amplifier
4 x PSS 415 Speakon system cable 15 m
2 x PCL 880 loudspeaker stand poles
© by EVI Audio GmbH 03/99/10 · Printed in Germany (KOE) · SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Technical Specifications
Type F120 F150 F5 F8
Design 2-way 2-way Subwoofer Subwoofer
Components: LO 1 x 12“ 1 x 15“ 1 x 15“ 1 x 18“
EVM 12L Pro-Line EVM 15 L Pro-Line EV DL15X EVX 180A
HI DH 2T DH 2T - -
HT 94 HT 94 - -
Nominal power rating RMS 300 W 400 W 400 W 500 W
Program power capacity 600 W 800 W 800 W 1000 W
Frequency response (-10 dB) 75 Hz-18 kHz 70 Hz-18 kHz 48 Hz-280 Hz 40 Hz - 300 Hz
Nominal SPL (1W/1m) 100 dB 102 dB 100 dB 100 dB
Max. SPL*: 128 dB 131 dB 129 dB 130 dB
Impedance: 8 Ω 8 Ω 8 Ω 8 Ω
Crossover frequencies: 1.6 kHz 1.6 kHz 160 Hz 160 Hz
Dimensions:
Width: 436 mm 522 mm 436 mm 522 mm
Height: 629 mm 755 mm 617 mm 737 mm
Depth: 339 mm 395 mm 674 mm 674 mm
Weight: 21.5 kg 26.5 kg 30.5 kg 38.0 kg
* calculated with program power
EVI Audio GmbH · Hirschberger Ring 45 · D-94315 Straubing
Tel: +49 (0) 94 21 / 706 - 0 · Fax: +49 (0) 94 21 / 706 - 265 · www.dynacord.de
PM2600
HI-Channels LO-Channels
Load Impedance 8Ω 4Ω 8Ω 4Ω
Maximum Midband Output Power, THD = 1%, 1kHz, 60Hz 380W 700W 380W 700W
Rated Output Power THD < 0.1% 300W 600W 350W 700W
Maximum Single Channel Output Power 400W 750W 400W 750W
Dynamic-Headroom, IHF-A
Maximum RMS Voltage Swing, THD = 1% 58.7V 58.7V
Crossover Type PowerMax12*, Stereo active 2-way
Crossover Frequency 90 Hz
Lo-Cut 12dB/octave, 25Hz at -3dB ref. 1kHz
Frequency Response -3dB, ref. 1kHz, Lo-Cut 25Hz ... 45kHz
Minimum Load Impedance 2.5 Ω
Input Sensitivity at rated output power @ 4Ω 0dBu (775mV)
Maximum Input Level +21dBu (8.7V)
THD at rated output power, MBW =80kHz < 0.05%
Crosstalk < -60dB
Slew Rate 30V/µs
Power Bandwith THD = 1%, ref. 1kHz, half power @ 4Ω 10Hz ... 50kHz
Input Impedance 20Hz ... 20kHz, balanced 20Ω
Damping Factor > 300
Signal-to-Noise Ratio, A-weighted > 100dB
Power Requirements 230V, 50Hz ... 60Hz
Power Consumption at 1/8 maximum output power @ 4Ω 1800W
Protection Audio limiter (APC), TBC, High temperature,
DC, HF, Back-EMF, Peak current limiter,
Inrush current limiter, Turn-on delay
Cooling Front-to-rear, 4-stage-fans
Safety Class I
Dimensions (W x H x D), mm 483 x 177 x 426
Weight 30kg
*Patent pending; Amplifier at rated conditions, all channels driven, 8Ω loads, HI-Channel rated at 1kHz, LO-Channel rated at 60Hz unless otherwise specified.
Note: 0dBu = 0.775V
F 120 F 5
PM2600
F 150 F 8
