Dynamco TX24 Remote Relay ( Transmitter ) User Manual Dynamco Pty Ltd

Download:
Mirror Download [FCC.gov]
Document ID	376604
Application ID	m4C/o+NqtUZLhHX9RCQ8uQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.68kB (545971 bits)
Date Submitted	2003-11-26 00:00:00
Date Available	2003-11-26 00:00:00
Creation Date	2003-11-26 19:13:22
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-11-26 19:13:35
Document Title	Dynamco Pty. Ltd.
Document Creator	Acrobat PDFMaker 5.0 for Word
Document Author:	TX24

SRR “DOMINO”
REMOTE CONTROL
SPECIFICATIONS
Battery voltage : 3VDC — CE2032 or equivalent.
Transmission frequency : 433M Hz
Transmission power: 7mW
Code permutations : 4,000,000,000,000,000,000 +
Algorithm: pseudo-random
PHYSICAL DESCRIPTION
Length : 50mm (not including chain)
Width : 32mm
Thick: 14mm
Weight : 209rams (including battery)
OPERATION
Norm al transmission
Momentarily press the button panel near the LED
Iensetotransmitacode.
“Shaker” mode
“Shakei” mode enables the SRR Remote to
transmit when it is moved. This allows the user to
never need to press the remote to disarm their
vehcile security system.
Toenable“Shaker”
. Press the remote button for more than 3
seconds (until the LED flashes five times.
Todisable“Shaker’
. Press and hold the remote button until LED
extinguishes.
0 Then immediately, momentarily press the
remote button twice more. The LED will flash three
times to confirm disable process is complete.
LOWBATTERY
The SSR remote uses a single cell 3.0V lithium
battery. The battery voltage is constantly monitored
bythe CPU inside the remote.
If the battery is deemed to be almost completely
discharged, the SRR remote will transmit a special
“low battery” signal to the security system**** each
time a code is sent.
In “Shaker” mode, the SSR remote will flash the
LED each time the remote transmits a code with a
low battery.
**** Special software must be implemented in the
security device for the “low battery" signal to have
any effect. Consult the specifications of the security
system for details.
CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by
the grantee of this dewce could void the user’s authority to
operate the equipment,
BATTERY REPLACEMENT
CASE TOP KEYCHAIN
LEI]
LENSE EATIERV HOLDER
BuTroN ‘
PANEL
PCB
nor: SIDE UP)
EATIERV
(we up)
PCB
cASE BOTTOM (comm SIDE up)
To replace the :
0 Use a small phillips screwdriver to remove the
two screws from the back of the case.
0 Remove the printed circuit board (PCB), turn
overto reveal the battery holder.
0 Use a small screwdriver to push the battery out
the holder, the 'D’ shaped cutout in the holder
allows the screwd river access to the battery.
0 Insert new the CR2032 into the holder with the
positive side of the battery facing up.
0 Carefully re-assemble the case and insert the
screws.
CAUTION:
FCC Label Compliance Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to he following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
D YNAMCOPTYLTD
Securing Vehicles Worldwide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:11:26 19:13:35-08:00
Create Date                     : 2003:11:26 19:13:22-08:00
Title                           : Dynamco Pty. Ltd.
Subject                         : Remote Relay (Transmitter)
Author                          : TX24
Creator                         : Acrobat PDFMaker 5.0 for Word
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 1
Mod Date                        : 2003:11:26 19:13:35-08:00
Creation Date                   : 2003:11:26 19:13:22-08:00
Metadata Date                   : 2003:11:26 19:13:35-08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools