Dynex Adapter And Converter Unit Quick Setup Guide DX TADPCON_10 0649_QSG_V1_EN_web

Dynex-Dx-Tadpcon-Quick-Start-Guide dynex-dx-tadpcon-quick-start-guide

: Dynex Dynex-Adapter-And-Converter-Unit-Quick-Setup-Guide-694881 dynex-adapter-and-converter-unit-quick-setup-guide-694881 dynex pdf

Open the PDF directly: View PDF .
Page Count: 2

DX-TADPCON

All-in-one Adapter and Converter Combo Unit

Important safety instructions

Read and review these instructions before using the adapter/converter.

1 Before using the adapter or converter, check the product you intend

to connect the adapter or converter to use for the manufacturer’s

voltage and wattage rating, which should be located on the product.

CAUTION: Adapters alone do not convert voltage. To avoid

damaging your appliance, do not use without a voltage converter.

2 Do not leave the converter in the power outlet when not in use. Do

not continue to use the adapter/converter combo if it is not working

properly, has been damaged, or dropped in water.

3 Some appliances may operate a little more slowly when used in

foreign countries operating on 50 cycles (U.S. operates on 60 cycles).

4 At times there may be a very low humming sound in the converter,

appliance, or both. This is normal.

5 Due to unstable voltage in most foreign countries, if your appliance

has a built-in thermostat, it may shut o your appliance prematurely.

This does not mean your appliance or converter (or both) are not

working correctly. After your appliance cools down it should resume

operating correctly.

SAVE THESE INSTRUCTIONS

Warning!This product is intended for adult use. This product is NOT

intended for use by unsupervised children. Choose proper settings and

plug in this product before directly supervising children using

appliances connected to this product.

Package contents

• All-in-one adapter and converter combo unit

• Quick Setup Guide

Instructions for use

Warning: Indoor use only!

Most foreign countries operate on 220 V/240 V. Most appliances sold in

the U.S. are manufactured to operate on 110 V/120 V. This converter

converts the voltage system. Appliances that operate on 110 V/120 V will

not work in most parts of the world where the voltage is 220 V/240 V.

Your all-in-one adapter/converter makes it possible to use most of your

QUICK SETUP GUIDE

ENGLISH 10-0649

portable appliances almost anywhere in the world. The

adapter/converter can be used as an adapter only or as an

adapter/converter combo. The adapter-only function should be used

with dual-voltage appliances. The adapter/converter combo function

should be used with single-voltage appliances.

How to determine whether the appliance is single or dual voltage:

The appliance label shows information like model #, wattage, and

voltage. Dual-voltage appliances will list 110 V/220 V AC, 120 V/240 V AC,

or something similar. This means they accept both 110 V and 220 V AC.

Single-voltage appliances will indicate 110V AC or120V AC.

If dual-voltage, your appliance may have this information on the label.

Other items such as laptop computer battery chargers, camera battery

chargers, and iPods automatically adjust to 110V or 220V power.

Adapter only:

The voltage selector switch is located on the input side of the

device beneath the pins or blades. The switch should be positioned

in the adapter setting. Plug dual voltage appliances into your adapter.

Select the correct country dual-voltage plug blade, then plug the

adapter into a power outlet.

Adapter/converter combo:

The voltage selector switch should be in the converter position. Plug

a single-voltage appliance rated 50 to 1875W into the converter and

select the correct power outlet plug. Plug the adapter/converter

combo into a power outlet.

Note: Converter cannot be used with low-wattage appliances (i.e.,

rated 0–49W). The converter is designed to be used only for short

periods of time (approximately 10 minutes).

To select the correct plug:

Europe: Push the rst set of side buttons forward.

UK/Hong Kong: Push the second set of side buttons forward, then

push down the middle prong.

North America/South America/Japan: Push the third set of side

buttons forward.

Australia/New Zealand:

Push the third set of side buttons forward, then swivel each prong to

the correct angle (as shown).

Note: When using a 2- or 3-prong Australia/NZ appliance, you may

need to apply some force to the plug to insert it all the way.

For more information

For troubleshooting, specications, legal notices, and warranty, see

www.dynexproducts.com.

© 2010 BBY Solutions, Inc., All Rights Reserved.

Europe, Middle East, parts of

Africa, South America, and Asia

Great Britain, Ireland, Africa,

Hong Kong, and Singapore

North and South America,

Caribbean, China, and Japan

Australia, Fiji, New

Zealand, and China

For Outlet

Types: To use in: Set selector at:

Parts of North America,

Caribbean, & Japan 120 V

Flat parallel Parts of South America

blades Caribbean,& Japan 240 V

Parts of Middle East, Africa,

Asia, South America 120 V

Round thin pin

Europe, parts of Middle East,

Africa, Asia, South America 240 V

Australia, New Zealand, 240 V

Flat angled blades Fiji, and parts of China

Round thick pins Northern Europe 240 V

Great Britain, Ireland, 240 V

parts of Africa, Hong Kong,

3-prong blades and Singapore