Dyson Dc03 Users Manual DCO3 Operating Manual2
DC03 dc03_uk_manual_std_120710 pdf
DCO3 dc03_manual_uk
dc03 87aa452c-695d-43b1-a0e1-51ff902a9e29 Dyson Vacuum Cleaner DC03 User Guide |
2015-03-12
: Dyson Dyson-Dc03-Users-Manual-656833 dyson-dc03-users-manual-656833 dyson pdf
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
DCO3 Operating Manual DYSON CUSTOMER HELPLINE 0990 275104 8am to 8pm, 7 DAYS A WEEK DCO3 quick reference page Adaptive Brush Control The Adaptive Brush Control is a simple device to allow cleaning of hard floors by switching off the brushbar. The height adjusts automatically. M A N U A L N P NEUTRAL PA R K brush OFF for use on delicate rugs and floors. Manually select/de-select Neutral. Cover cap/ storage hook brush OFF for when the cleaner is left running in the upright position and when the hose is in use. Cable winder D DRIVE brush ON for normal carpet cleaning. THE SAFETY ALERT RATCHET NOISE WARNS THAT THE BRUSHBAR IS OBSTRUCTED Wand release catch On/off switch Wand Fit tools to hose for car cleaning Adaptive Brush Control Carrying handle Cyclone release catch Tool location Push button to release or replace wand Bin release catch Shroud Cyclone assembly Twist ring Pre-motor filter Post-motor filter Hose Bin inner Quick release window Blockage removal cassette catch Blockage removal cassette Soleplate Lower cable winder Filters and blockages Ensure the pre-filter is changed regularly. If filters block, the cleaner may overheat and cut out. The Dyson DC03 has a built in motor protection thermostat to protect the appliance in the event of a restriction to airflow. Unplug cleaner. Leave for 30 minutes. Fit a new pre-filter before use. 1 2 4 3 NB If the cleaner is still blocked lift out the post-filter and check inside for dust caking. Pre-motor filter Post-motor filter 1 Rotate twist ring to the left to release filter case. 2 Remove filter case from machine body. 3 Lift out pre-filter using handle (replace at least every 12 months). 4 Replace filter case and rotate twist ring down and to the right to secure. Blockage removal cassette catch Cyclone entry 2 1 1 Using a coin, undo the yellow fastener to remove the quick release window. Check for blockage at the bottom of the duct and underneath the soleplate. duct 4 3 2 Remove wand from hose and look down the wand to check for daylight. Locate blockage removal cassette catch at base of hose location. 3 Pull back catch, remove cassette and check for blockage. To replace, position at 450 and click catch back into place. 4 Remove Cyclone assembly to check Cyclone entry and duct. DYSON CUSTOMER HELPLINE: 0990 275104 8am to 8pm, 7 days a week Bin emptying and brushbar Do not fill bin above maximum line. Keep small holes clear of dust and fluff. 1 2 3 5 Optional 4 1 Push Cyclone release catch forward to free Cyclone assembly. 3 Push bin release catch forward to free the bin. 2 Pull Cyclone assembly away from the machine. 4 Wrap a plastic bag firmly around the rim of the clear bin and empty (wait ten seconds to allow dust to settle). 5 To clean bin, wash in warm water. Do not remove bin inner and seals, and ensure bin is dry before reassembling. If the brushbar is obstructed, a loud ratchet warning noise will be heard. Pull the cleaner away and it will automatically re-set itself. For thread removal, unplug cleaner and carefully cut away threads from brushbar. End cap of brushbar 1 2 4 3 Raised section 1 If ratchet warning noise continues, stop 2 Using a coin, undo the three yellow vacuuming, turn off the machine and fasteners. 3 Remove soleplate and clear the unplug. To free the brushbar, lie the brushbar obstruction. machine on its front to reveal the soleplate. 4 To replace brushbar, align and locate in slots. Rotate until the end caps click into place. Rotate brushbar to allow belt to centralise, then replace soleplate. DYSON CUSTOMER HELPLINE: 0990 275104 8am to 8pm, 7 days a week DY S O N C U S T O M E R C A R E If you have any questions about your Dyson, we do not want you to be put out in any way. All you have to do is call the Dyson Customer Helpline on 0990 275104 from 8am to 8pm, seven days a week. When calling, please have the following information ready: O99O 2751O4 1. Serial number of your Dyson (between the wheels) 2. Your postcode 3. The date of purchase 4. Where you made your purchase Most queries can be solved over the telephone. If not, this is how our repair service works: today overnight back to Dyson overnight back to you If you call before 11.00am (monday to friday), your cleaner will be collected after 12 noon that day. Our aim is to courier your cleaner back to the Dyson factory and return it to you repaired and tested within 48 hours. The service may take a little longer in some areas, such as the Highlands and Islands. DYSON CUSTOMER HELPLINE: 0990 275104 8am to 8pm, 7 days a week Important safety instructions WHEN USING THE DYSON DC03 VACUUM CLEANER PLEASE ADHERE TO THESE SIMPLE PRECAUTIONS PLEASE READ CAREFULLY BEFORE USE Check that your supply corresponds to that shown on the rating plate. The appliance must only be used as rated, and it should be fitted with an approved fuse to BS1362. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Dyson dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket. If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt please consult a qualified electrician. By doing so you will reduce the risk of fire, electrical shock or injury. • Do not leave the vacuum cleaner plugged into the mains socket outlet. Unplug from the outlet when not in use and before cleaning the appliance, and before maintenance operations. • Ensure that hands, feet and fingers, particularly of small children are kept away from the cleaner and especially from the brushbar. If hanging the cleaner by the storage hook, ensure it is securely fixed and out of the way of children and pets. Never allow children to play with or use this appliance. • Do not use without the bin assembly fitted correctly and both filters in place. Do not fit anything other than Dyson spare parts. This could invalidate your guarantee (Call the Dyson Helpline on 0990 275104). • Do not carry out any maintenance work on the cleaner other than that outlined in this manual, especially where electrical components are concerned. • Ensure that the brushbar is off when cleaning smooth floors to avoid marking. If carpet pilling occurs, either use the cleaner with brushbar on to remove, or contact the carpet retailer. • Static charges can occur in the clear bin when vacuuming certain carpets. These are entirely harmless and are not associated with the mains supply. To minimise any effect, do not put your hand or insert any object into the clear bin unless you have first emptied and rinsed out the clear bin with water. If wiping dust from the shroud, use a brush or a damp cloth. • Do not use the cleaner if the cable or plug are damaged or if the machine has been damaged, dropped or has come into contact with water or any other liquids. In these cases, contact the Dyson Helpline on 0990 275104. • Do not put any part of the body, clothes or any object near or into the openings or moving parts of the machine. Do not use the machine with any of the openings blocked with an object that may restrict the air flow. • Do not damage the cable by running the cleaner head over it, closing a door on it or running it over sharp edges. Do not put the cable near or on hot surfaces. If the cable is damaged, call the Dyson Helpline. • • Always stand above the machine when cleaning on the stairs. • • Do not use the cleaner or handle the plug with wet hands. • • Do not use the machine to pick up hot ashes or burning objects of any kind. • • Do not use the cleaner near open or gas fires when they are lit. • When carrying the cleaner, use only the carrying handle positioned immediately below the on/off switch. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: BLUE: Neutral BROWN: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. 2. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. Under no circumstances should either of these wires be connected to the earth terminal of the three pin plug, marked with the letter E or the Earth Symbol or coloured GREEN or GREEN and YELLOW. Always ensure that the cable clamp is fitted and that it clamps the cable outer and NOT the coloured wires. How to replace the fuse: 1. Open the fuse compartment with a screwdriver. 2. Replace the fuse and fuse cover if detachable. If the supply cable of the appliance is damaged, disconnect the appliance from the socket outlet immediately; the supply cable must be replaced. This should be carried out by Dyson Appliances Ltd only or its appointed agent, as special purpose tools and service techniques are required. EUROPEAN CONFORMITY INFORMATION A sample of product has been tested and found to be in conformity with the following European Directives: 73/23/EEC Low Voltage (Safety) Directive 93/68/EEC CE Marking Directive UNWANTED PRODUCTS AND THE ENVIRONMENT Should you find one day that your product needs replacement, or is of no further use to you, think of the protection of the environment. Contact the Dyson Helpline to recycle your cleaner. The cleaner’s plastic parts will be sorted, cleaned, re-cleaned, separated, granulated, dyed and re-moulded. The re-cycled parts will then go to make new, Dyson Recyclone cleaners – the world’s first recycled vacuum cleaner. Do not, under any circumstances, use the cleaner to pick up water or any other liquid. Electrical shocks could occur if used outdoors or on wet surfaces. Do not use the machine to pick up flammable or combustible substances and do not use near such substances. Never pick up asbestos or asbestos dust or poisonous solids, such as copier toner. Do not immerse the whole machine in water for cleaning. The clear bin alone may be washed out after emptying. Do not remove bin inner and seals. Ensure it is completely dry before re-using the cleaner. Turn the machine off by the switch button before unplugging from a mains outlet.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 1999:09:28 17:41:23 Producer : Acrobat Distiller 4.0 for Macintosh Author : DENISE STEVENSON Creator : QuarkXPress Passportª: LaserWriter 8 8.3fc2 Title : DCO3 Operating Manual2 Modify Date : 1999:09:29 09:33:02 Page Count : 6EXIF Metadata provided by EXIF.tools