E Lead Electronic EL400D E-Tool User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2612046
Application ID	pc6BD/qtnz4x2CF/i/APqQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	67.89kB (848636 bits)
Date Submitted	2015-05-13 00:00:00
Date Available	2015-05-13 00:00:00
Creation Date	2014-11-28 14:37:39
Producing Software	3-Heights(TM) PDF Producer 4.4.43.3 (http://www.pdf-tools.com)
Document Lastmod	2015-05-13 13:29:00
Document Title	Microsoft Word - 52014000001-00 E-Tool user's manual (1128)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	nicola

-Tool user's manual
Product Name:E-Tool
Model:EL-400D
Table of Contents
1.
-Tool Introduction …………….…………………………………1
2.
-Tool keypad Instruction ………….….……………………….. 2
3. Setting ……………………………………. …………….…………... 3
4. Diagnose Sensor Function……………………………………….. 4
5. Auto Duplicate Function …………………………………...…….. 6
6. Manual Duplicate Function …………………..…………………... 7
7. Program Blank Sensor Function…………………………….…... 8
8. Whole Car Learning…………………………………………….….. 9
9. Wireless ID/RL Modify…………………...……………………….. 12
1.
-Tool Introduction
Indicator will turn
red when battery
is low.
Indicator will turn red
when charging.
-Tool is designed to diagnose and interacts with sensor through wireless
(radio frequency). The functions of sensor include:
1. Retrieve data from sensor mounted on the wheels.
2. Verify the identity of sensor mounted on the wheels.
D-Sub is to connect with E-Cable.
DC jack is to connect with adapter for charging.
Mini USB is to connect with PC for software update.
2.
-Tool keypad Instruction
Power On/Off.
Enter key, press
enter to select
function or
validate a
parameter.
Navigate through
measured and
parameters.
Esc key, press to
return to the
previous menu
without parameter
validation.
3. Setting
Displays E-LEAD logo.
Press ESC
menu page.
key on CAR MAKER to go to
Choose SETUP and enter
3-1. Language: Use the “Enter”
key to select.
key to choose the language you prefer.
3-2. Temperature: Use the “Enter”
key to choose
between Fahrenheit and
Celsius.
3-3. Pressure: Use the “Enter”
3-4. Format: Use the “Enter”
key to choose
key to choose
between PSI, Bar and kPa.
ID format between decimal and
Hexadecimal.
3-5 .AUTO OFF:
-Tool will automatically turn off if you stop using it for a period
of time. You will disable this function by choosing Disable.
3-6. Buzzer: Use the “Enter” key to turn buzz on and off.
3-7. Bluetooth: Use the “Enter”
3-8. Zone: Use the “Enter”
key to turn on and off of Bluetooth.
key to choose between European version and US
version.
3-9. SN: SN is
-Tool’s serial number for software update.
3-10 Checksum: It is for engineering check.
3-11 version: VERSION is
-Tool’s Firmware version..
4. Diagnose Sensor Function
1. Press and hold the power key to power on the device and the device displays
E-LEAD logo.
Long press to turn on the device.
Displays E-LEAD logo.
Choose car maker by using arrow key to browse
alphabets. Press enter key
to select.
Use arrow key to browse automakers. Press enter
key to select.
Use arrow key to browse models. Press enter
key to select.
Use arrow key to browse year. Press enter
key to select.
Use arrow key to select DIAGNOSE SENSOR
and press enter
key to diagnose.
-Tool will activate the sensor. The sensor
respond time may vary depending on sensor type
and brand.
-Tool will beep after receiving sensor
information.
The picture below is an example of diagnose result:
Notes
 Not all sensors transmit every piece of information shown.
5. Auto Duplicate Function
This function is designed for you to duplicate an O.E sensor’s ID and program a
new sensor.
Choose car maker by using arrow key to browse
alphabets. Press enter
key to select.
Use arrow key to browse automakers. Press
enter
key to select.
Use arrow key to browse models. Press enter
key to select.
Use arrow key to browse year. Press enter
key to select.
Use arrow key to select AUTO DUPLICATE and
press enter
key to select.
-Tool will display the O.E sensor ID, press the
“Enter”
key to program -sensor. -Tool
will beep after receiving sensor information. If
you press ESC, -Tool will delete ID.
Please connect
E-Cable.
-Tool with
-sensor by
-Tool will program the sensor.
You will hear 2 short beeps when programming
successfully.
6. Manual Duplicate Function
This function is designed to duplicate an O.E senor’s ID by keying in its ID. If
-Tool cannot detect sensor, you can put senor’s ID into it.
Choose car maker by using arrow key to browse
alphabets. Press enter
key to select.
Use arrow key to browse automakers. Press
enter
key to select.
Use arrow key to browse models. Press enter
key to select.
Use arrow key to browse year. Press enter
key to select.
Use arrow key to select MANUAL DUPLICATE
and press enter
key to select.
Use the arrow key to browse, Press the “Enter”
key to enter the ID.
Please connect
E-Cable.
-Tool with
-sensor by
-Tool will program the sensor. You will hear 2
short beeps when programming successfully.
7. Program Blank Sensor Function
This design is to program a new ID to a new
from OE sensor.
-sensor, once you cannot get ID
Choose car maker by using arrow key to browse
alphabets. Press enter
key to select.
Choose car maker by using arrow key to browse
alphabets. Press enter
key to select.
Use arrow key to browse models. Press enter
key to select.
Use arrow key to browse year. Press enter
key to select.
Please connect
E-Cable.
-Tool with
-sensor by
Use arrow key to select PROGRAM BLANK
SENSOR and press enter
key to select.
After programming a blank sensor, the new
ID will display.
8. Whole Car Learning
This function is designed for getting all O.E. sensor’ ID on the car at one go and
then copying the ID to target sensors on the car at one go. Please note that the
target sensors are required to have protocol inside.
8.1 Read All
This design is to get all O.E. sensor’s ID on the car at one go.
Choose car maker by using arrow key to
browse alphabets. Press enter
select.
key to
Choose car maker by using arrow key to
browse alphabets. Press enter
select.
key to
Use arrow key to browse models. Press enter
key to select.
Use arrow key to select WHOLE CAR
LEARNING and press enter
key to select.
Use arrow key to select READ ALL and press
enter
key to select.
Please scan the sensor from left front, left
rear, right rear, right front tire and spare tire in
order.
After scanning sensors, -Tool will save the
data. The maximum storage is 25 pcs of
sensor’s data. We suggest saving data to PC.
8.2. WRITE ALL
This function is designed for copying the ID to target sensors on the car at one go.
10
After showing the data storage status, press
to copy ID to target sensors on the car at
one go.
Use arrow key to select WRITE ALL and
press enter
key to select.
Use arrow key to select Enter=duplicate and
press enter
key to select.
After changing the tires, put
-Tool closely
near left front, left rear, tire and press
to copy the ID to target sensor.
11
key
9.Wireless ID/RL Modify
This function is to design for copying O.E sensor to target Senor. Please note the
target sensor is required to have the same protocol as O.E sensor.
Choose car maker by using arrow key to browse
alphabets. Press enter
key to select.
Choose car maker by using arrow key to browse
alphabets. Press enter
key to select.
Use arrow key to browse models. Press enter
key to select.
Use arrow key to select WIRELESS ID/RL
MODIFY and press enter
key to select.
9.1 Sensor ID Copy Function
Use arrow key to choose SENSOR ID COPY.
Press enter
key to select.
Scan O.E. sensor wirelessly.
12
-Tool will show OE sensor’s ID then you can
press
key to copy the ID to target sensor.
Please place target sensor near -Tool.
You will hear 2 short beeps when it is done.
9.2 Manual ID Modify Function
Use arrow key to choose MANUAL ID MODIFY.
Press enter
key to select.
Scan O.E. sensor wirelessly.
-Tool will show OE sensor’s ID and press
modify the ID.
Use arrow key to browse and press
Complete Modification.
13
to
to select.
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : nicola
Create Date                     : 2014:11:28 14:37:39+08:00
Modify Date                     : 2015:05:13 13:29:00+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : nicola
Title                           : Microsoft Word - 52014000001-00 E-Tool user's manual (1128)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:05:13 13:29+08:00
Producer                        : 3-Heights(TM) PDF Producer 4.4.43.3 (http://www.pdf-tools.com)
Document ID                     : uuid:14d2dd51-87bc-461b-b18d-a3385c4ab319
Instance ID                     : uuid:aefd6e80-c785-4a2f-b355-309ac68d5404
Page Count                      : 16

EXIF Metadata provided by EXIF.tools