E Lead Electronic ELBTHS235 Necklace Bluetooth Wireless Earphone User Manual Manual revised

E-Lead Electronic Co., Ltd Necklace Bluetooth Wireless Earphone Manual revised

Manual revised

Download: E Lead Electronic ELBTHS235 Necklace Bluetooth Wireless Earphone User Manual Manual revised
Mirror Download [FCC.gov]E Lead Electronic ELBTHS235 Necklace Bluetooth Wireless Earphone User Manual Manual revised
Document ID326068
Application IDnTn8ErJIZntkXsUCZLKMIA==
Document DescriptionManual revised
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.71kB (71427 bits)
Date Submitted2003-05-16 00:00:00
Date Available2003-05-16 00:00:00
Creation Date2003-05-16 09:24:39
Producing SoftwarepdfFactory Pro v1.57 (Windows 98 Chinese)
Document Lastmod0000-00-00 00:00:00
Document TitleMicrosoft Word - EL-235 user manual_English_-new.doc
Document CreatorpdfFactory Pro http://www.pdffactory.com
Document Author: jchu

1. Accessories
CONTENTS:
Page:
1. Accessories ..............................1
2. Specifications for Button-keys...1
3. Descriptions of LED indicators ..2
4.The operations of pairing with
Specification
Handbook
Functions & specifications of E-LEAD EL-235,
the Necklace Bluetooth Wreless Earphone
phones ......................................3
5. The communicating operation ...4
6. Recharge the battery ................7
3. Descriptions of LED indicators
(1). E-LEAD EL-235, the Necklace Bluetooth
wireless earphone
(includes one rechargeable battery) ×1
(2). Exclusive charger ×1
(3). Specifications handbook ×1
2. Specifications for Button-keys
(1). “Answer” - To answer the incomingcall or
hang up a call.
(2). “Power” – To turn on and off.
(3). “Volume Up” - To turn up the volume.
(4). “Volume Down” - To turn down the volume.
Answer
Volume Up
7. Other information… … … … ...… . 8
8. Specifications............................9
9. Appendix: Safety Declarations..10
Power
Volume
(1). The Necklace Bluetooth wireless earphone has
three kinds of LED indicator-signals: green, red
& yellow, and only one signal is showed at one
time. Green means the battery is normal; red
means the battery is low and yellow means the
battery is under charging.
(2). LED twinkling (keep light for 0.5 seconds at an
interval of 0.5 seconds)- the Necklace Bluetooth
wireless earphone is in waiting for matching.
(Pairing mode)
(3). LED twinkling (keep light for 0.1 seconds at an
interval of 3 seconds)- Necklace Bluetooth
wireless earphone is standby and ready to use.
(Standby mode)
(4). LED twinkling (keep light for 1.0 second at an
interval of 1.0 second) - Necklace Bluetooth
wireless earphone is under dominant mode to
act the VR-function or communicate with
mobiles actively.
(5). LED twinkling quickly (keep light for 0.1
seconds at an interval of 0.1 seconds)- one call
comes.
(6). LED keeps lighting- The Necklace Bluetooth
wireless earphone is communicating with one call.
4. The operations of pairing with phones
5. The communicating operation
(1). Press “Volume Up”& “Answer”on the necklace
Bluetooth Wireless Earphone simultaneously and
then lease them, now you can enter to pair
EL-235 with your phone; the LED would twinkling
with an interval of 0.5 seconds. (Attention: please
refer the item (3) of section 7 before operating)
(2). Please use a mobile with Bluetooth to search the
Bluetooth equipment (Refer to the mobile
handbook for the operation method).
(3). After the searching, the device named “EL-235”,
the Necklace Bluetooth Wireless Earphone, would
be shown on the mobile screen.
(4). Choose EL-235 and add a new pairing.
(5). Enter the ID number: 0000.
(6). Return to Power-ON screen when succeeded for
pairing.
(7). The Necklace Bluetooth Wireless Earphone
would enter the standby mode when having
succeeded in matching and the LED would keep
twinkling for 0.1 seconds at an interval of 3
seconds.
(1). Keep pressing “Power”for 3 seconds to turn on
the EL-235 till the LED starts twinkling and hear
the sound of three tunes from low to high if you
wear the earphone then lease.
A. If the LED keeps twinkling for 0.1 seconds at
an interval of 3.0 seconds, it means that the
Necklace Bluetooth Wireless has been matched
and under the standby mode.
B. If the LED keeps twinkling for 0.5 seconds at
an interval of 0.5 seconds, it means that the
Necklace Bluetooth Wireless has not been
matched.
C. If the LED keeps twinkling for 1.0 second at an
interval of 1.0 second (this is only applicable with
Nokia mobile phones), it means that the
Necklace Bluetooth wireless has been paired
and is trying to communicate with one mobile
phone.
(a) If the mobile phone matched with EL-235 is
not powered on, EL-235 will try to
communicate with the matched phone
continuously till the phone is powered on.
You also can reset and build a new pairing
between your phone and EL-235.
(b) If the mobile phone paired with EL-235 is
powered on, please operate the mobile phone
to re-connect with EL-235. Otherwise one
minute later, EL-235 will enter the paring mode
automatically and you need to build a new
pairing between your phone and EL-235.
(2). After the dialing on the mobile, the earphone
would pick up this call automatically. (For Philips
mobiles, it needs to be selected the function
-“Switch to Earphone”manually. Please refer the
handbook of Philips mobiles)
(3). If your mobile supports and has started VR-dial
function, keep pressing the “Answer”on the
earphone for about 3 seconds and notify a
“beep”, then lease, and refer to the mobile
handbook for VR-dial instructions. (For Nokia
mobiles, it is unable to dial out by VR-function
from EL-235, but there is no problem to use
VR-dial function from Nokia mobiles directly.
(4). When the mobile has one call, you can hear the
ringing in the earphone & the LED would twinkle
quickly (keep light for 0.1 seconds at an interval
of 0.1 seconds), and you can pick up the call by
pressing “Answer”.
(5). The LED would keep lighting during
communication.
(6). You can use the “Volume Up”or “Volume Down”
to adjust the volume during communication.
There are 15 segments from the maximum to
minimum for the volume control and it will notify a
“beep”at the maximum and minimum.
(7). Press the “Answer”for 3 seconds and notify a
“beep”can force to hang up the call during
communication.
(8). The Necklace Bluetooth wireless earphone
would resume to standby mode automatically
when the call was finished.
(9). To turn off the Necklace Bluetooth wireless
earphone during the standby mode, please keep
pressing “Power”for 3 seconds to turn on the
EL-235 till the LED starts twinkling 3 times and
hear the sound of three tunes from high to low if
you wear the earphone then lease, the earphone
would be powered off. It also can turn off the
Necklace Bluetooth wireless earphone during
communication, please keep pressing the
“Power”for 3 seconds to hang up the call and the
green LED twinkles 3 times at the same time;
also will hear the sound of three tunes from high
to low if you wear the earphone then lease, the
earphone would be powered off.
6. Recharge the battery
7. Other information
8. Specifications
(1).After EL-235 was powered on for about 6
seconds, the LED will indicates the current battery
status: green means the battery is normal; red
means the battery is low; yellow means the battery
is under charging.
(2). After the charging adapter was inserted into
a EL-235 for about 6 seconds, the LED will
indicates yellow and the battery is under
charging.
(3). EL-235 which is powered off will be
powered on automatically by inserting the
charging adapter and the LED will indicates
according to the item (1) of section 6.
(4). As the LED indicates red, please insert the
charging adapter into EL-235 to charge the
battery as soon as possible. The LED will be
yellow and the battery is under charging in 6
seconds. As the battery is full by charging for
about 3.5 hours, the LED will be green and it
is allowed to keep charging one more hour to
ensure a fully charged battery.
(5). The LED indicates the battery status after
remove the charging adapter for about 6
seconds: green means the battery is normal;
red means the battery is low.
(1). If the battery low on standby mode, the red
LED would keep twinkling red and if the
battery is low during communication, the
red LED would keep twinkling besides the
earphone also notifies the sound “beep” 2
times per minute).
(2). The lift time of standby and communication
depends on the different temperature and
environment of the battery.
(3). When EL-235 is under “Pairing mode”,
please remember to disconnect, cancel
(Nokia mobiles) or remove the existed
pairing record of your phone. Please refer
the instructions of the manual of your mobile.
Otherwise any dial-out or incoming-call of the
phone paired with EL-235 will be connected
again automatically to EL-235 even it is
under “Pairing mode”.
(4). For Nokia mobile phones, if the connection
was interrupted from phones manually,
EL-235 will be under “Pairing mode”
automatically.
(1). Frequency Range: 2402~2480 MHz
(2). Bluetooth Regulations: V1.1
(3). Power for Radiation Frequency: 4 dBm
MAX.( Class 2 )
(4). Receiving Sensitivity: < -70 dBm
(5). Temperature for Operation: 0'C~+60℃
(6). Temperature for Storage: -20'C~+60℃
(7). Voltage for Operation: 3.6V
(8). Current for Operation: 0.06A
(9). Looking & Size: 54.5 * 47 * 16mm
(10). Weight: 35g
(11). Communication Time: 3 hours
(12). Standby Time: 100 hours
(13). Charging Time: 3.5 hours
(14). Distance for Operation: 10m
Appendix: Safety Declarations
(FCC Part 15)
1) Service in USA:
GLOBALCOM ELECTRONIC
TECHNOLOGY INC.
20653 LYCOMING ST., 3A1, WALNUT CA
91789 U.S.A.
TEL: 002-1-909-4445808; 909-4689397
FAX: 002-1-909-4681894
Simon Liou
E-mail: get888@earthlink.net
2) Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
10
The users manual or instruction manual
for an intentional or unintentional
radiator shall caution the user that
changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications.
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
needed.
Consult the dealer or an
experienced radio/TV technician
for help.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
11
E6WE235A00001-01
12

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : Microsoft Word - EL-235 user manual_English_-new.doc
Author                          : jchu
Creator                         : pdfFactory Pro http://www.pdffactory.com
Producer                        : pdfFactory Pro v1.57 (Windows 98 Chinese)
Create Date                     : 2003:05:16 09:24:39
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QYKELBTHS235

Navigation menu