E RAE Electronics Industry Co 901CP 900MHz Cordless Telephone System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	68788
Application ID	scp+JiZIb4KSeZs9984d2A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	56.06kB (700696 bits)
Date Submitted	1999-11-09 00:00:00
Date Available	2000-02-02 00:00:00
Creation Date	1999-11-03 15:27:59
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	1999-11-03 15:28:15
Document Title	Users Manual
Document Creator	Acrobat 3.0 Scan Plug-in

User Guide
Model ECP—901SP
FCC Warning
This device complies with Part 15 of the FCC Ruls.
Operation is subject to the following two conditions: (I) this
device my not cause harmful interference, and (2) this
device must accept any interference received; including
interference that may cause undesired operation
Il‘
, 1 A .
Information to the User
niscquipntertthabcmt'estcdandfound toeomplywiththelirnits for-class
B digital devicepursuamtopan I5 ofFCQRrrles These limitsare desimcdlo
provide reasonable protection against bar-infill interference in a residential instal-
lation. This equipmentfgenemumscejand can radians radio fi'eqirency energy
and. lfnotinstalledandusedinaccordancewiththeinsmrctions, mayenuse
harmful interference toradiownrinuniations. However. there is no guarantee
that interference will notocuir in a particular inmllatiomlfthls equipment
does cnuse interferencetoradioortelevision recepficmwhichenn be determined
bymhgdwequipmentofinndomtheuserisuwomgedtonytocorrcetthe
interference by one or more of the following measures:
-Reerienl or reloente the receiving antenna.
-lncrease the separation between the equipment and receiver.
Connect the equipmentinto an outlet on a circuit difl‘erent from that to
which the receiver is connected.
Consult the dealeroran experirnwd radio/TV technician for help and for -
' additional suggestions.
The user may find the following booklet prepared by the Federal Communica-
Problerns." This booklet is available fi’om the 0.5. Govemment Printing Office.
Washington. DC. 20402, Stock No. 004000403454.
FCC Warning
The user is cautioned that changes or modifications not expressly approved by
the manufacturer could void the user‘s audmriry to operate the equipment.
315312er ‘
Locations of controls
Features
Handset
- Base unit
Initial preparation
Before installation
Battery installation
Installation of base unit and handset
Charge your handset
Convenient functions for you
Memory function I Channel scan I Flash function
RediaI/Pause function I Auto answer & Auto stand-by
Any key answer I Key lock I Intercom
Speaker volume control (Handset and Base unit)
Out of range Alarm
Low battery Alarm
Setting the functions
Tone I Pulse
Ringer Tones
Clock
Alarm Clock
Alarm Function
Key lock
Speaker Volume control (Handset)
Indicator light on the base unit
storing the telephone number into memory
Dialing the telephone numbers from memory
Making and Answering calls
Making a call
Answering a call
1165 (97? (Ci-311111116115 i
Handset
Make sure that your package includes the following items :
1. Cordless handset (1)
2. Base unit (1)
3. AC Adaptor f or Base Unit (1)
4. Tel line cord (1)
5. User Manual (1)
6. Battery (1)
7. Belt clip (1)
8. Headset (1)
1. Remove the battery compartment cover by pushing it downwards.
2. Place battery In the battery compartment.
3. Connect the plug of the battery.
4. Place the battery compartment cover.
1. Insert the small plug on the end of Ac adapter cord into the lack provided on
the rear of the base unit .
2. Plug the Ac adaptor into the wall outlet.
3. Place the handset on the cradle and charge for 10 hours.
4. Insert the one plug of the telephone line Into the wall socket and the other end
into the jack on the base unlt.
1. Before you use your telephone for the first time, charge the handset for
at least 10 hours.
2. To charge your handset, place it on the base unit. The battery symbol appears
on the display of the handset to Indicate that the handset is being charged.
me anatomist 5 mm
N— .
Function Explanation
You can store and remit up to 10 frequently called telephone
MEMORY FUNCT'ON numbers ( up to 16 digits each).
You can change the existing channel by pressing
Channel button only one time to the clearest channel.
Press this button to finish a call while tlte phone line Is' In use and
get a new dial tone without pressing the TALK button.
Pressing the FLASH button momentarily hangs up the phone to
transfer a all to other extension number, or access custom calrmg
features such as Call waiting or Three- way ailing provided
by your local phone company.
After you press the TALK button and hear a dial tone. press this
4- RED'AL F“"°'"°N button to dial the last phone number dialed.
In some cases such as PBX or long distance service, a pause may
be needed In the dialing sequence when storing a phone number.
Pressing the pause button inserts about 3 second delay between
dialed numbers.
5. PAUSE FUNCTION
When lifting the handset up from the base unit you an
5- answer a call without pressing the TALK button.
AUTO ANSWER I
AUTO STANDBY Place the handset in the cradle to hang up the phone.
ANY KEY ANSWER Press any key on handset to answer a call.
m You can lock the dial key not to be used by others.
If you press the ‘Answer/lntercom' button on the base unit
the handset will beep 10 times with the Page icon blinking
on the display of the handset
If you press the Talk button of the handset you can talk with base unit.
9.
INTERCOM
You can adjust the volume of speaker of the base unit and handset
during a call.
10. VOLUME CONTROL
(Handset I speakerphone)
it you have the handset too far from the base unit during a call.
the handset will beep. Then you should come closer to the base
unit.
11. OUT OF RANGE
ALARM
When the handset battery power is low, the empty battery icon will
appear on the display of the handset with alarming beep.
Place the handset In the cradle for charging.
12. LOW BATTERY
ALARM
Function Explanation
TONE MODE ( Default )
0 Slide the Tone/Pulse switch to the Tone.
TONE I PULSE
PULSE MODE
0 Slide the Tone/Pulse switch to the Pulse.
Handset
There are 4 different kinds of ringer tones.
0 Press "FUNC' button and 's'.
You will see “be" 1' on the display
0 Press 1 to 4 to select the ringer tone you like.
’ Press 5 for low bell volume.
0 Press TFUNC' button for storage.
) You hear a success beep.
0 “Bell 4' is mute.
RINGER TONES
BASE UNIT
There is a Low I High volume switch in the bottom of base unit.
? Press "FUNC‘ button and ‘1'.
You see ‘A _ _ - _ _' on the display.
0 Press “*' button for AM, or “#' button for PM.
You see 'A__-__" or ' p__-__'
on the display
D Press the hour and minute by number keys.
3 Press ‘FUNC' button for storage.
0 You hear a success beep.
Example) 8:25 AM
0 t 1 t * l 0825 t ‘
FUNC FUNC
’ Press ‘FUNC' button and “2'.
You see the time that are previously set.
0 Press "*" button for AM or #“ button for PM .
You see ' A__-____" or“ p __ -___' on the display.
0 Press the hour and minute by dial keys.
9 Press ‘FUNC' button for storage.
’ You hear a success beep with alarm icon on the display.
ALARM CLOCK
Example) 8:23 PM
0 t 1 t # l 0825 l.
FUNC FUNC
0 Press ‘FUNC' button and '3'.
“RM FUNCflON If the Memory Icon disappears on the display with beep.
Alarm function is off now.
To Lock the key
0 Press ‘FUNC' button and '4'
KEY LOCK To Unlock key
0 Press 'FUNC' button and '4'.
To Tum the volume Up.
VOIJJME comm. t In TALK mode, press FUNC“ button and " # A
Handset TO Tum the volume Dovm.
0 In TALK mode, press 'FUNC' button and " V #‘
Light Explanation
Red
t ‘ d.
steady The handse is charge
Green
flashing regulafly An outside call is incoming
with the bell
Green
A call is in ress.
steady prog
film tat—fiafmc- lmjfimmmfim
Step 1
Step 2
Press the ‘FUNC‘ button of
handset in standby mode.
{1
Press the 'FUNC' button
~ again. Then memory Icon
will appear on the display.
Press the phone number
within 16 digits
Press the 'FUNC' button.
and you will see LOC( _)
In the display.
Press 0 ~ 9 as a memory
Place.
You will hear a suwess
beep.
Example : If you want to store the telephone number 1234567 in memory place 3.
O 5 0
FUNC
FUNC
123 4567 t 0
Phone number
FUNC
Memory
Place
( If you use cordless phone connected to PBX system. )
O i 0
FUNC FUNC
Press the TALK button of
handset in standby mode.
You hear a dial tone.
0 “9" t "RE/PAUSE" 0
Press the 'FUNK" button.
( You see a memory icon
on the display.)
Press the number 0 to 9.
(Where the phone number
is stored )
1234567 0 O t 3
Phonenumber
FUNC Memory
Place
You see the stored phone
number on the display.
ll
The phone number will be
dialed out automatically.
Example : If you want to dial the telephone number stored in memory place 3.
0 0
0 )
TALK FUNC Memory
3 t 123 4567
Place
Phone number
0 Connected
than. tucmammedre ” V ,.
step Before dialing the
1 phone number
Step Dialing the phone
2 number
Step After completing
3 the conversation
If the handset is on the
cradle. Pick the handset up
Press the TALK button and
You will hear a dial tone.
Press the phone number.
Or
If the handset is on the base,
press TAU,( button, and use
speaker phone.
The indicator light of the base
) unit is green during a call.
If you stored the phone
number in memory place,
use memory dialing.
Afier connection, you can
talk.
When your conversation is
over, press TALK tutton.
Or
Place the handset in the
cradle to hang up.
(The LED light changes to
Red.)
I! the handset Is on
the cradle.
the cradle.
u the handset ls off 3"?
After completing
3 the conversation
When the phone rings;
Press any button on the
handset or Answer/Intercom
Button In the base unit.
Now you can talk through the
speakerphone.
continue talking through
_) handset.
You can pick up the handset to
Press the Answer/Intercom
button on the base unit to use
speakerphone.
Or
Press any button of handset
and talk
If you want to switch over to
handset from speakerphone,
Press the TALK button of the
Handset.
When your conversation is
the handset,
over, press the Talk button of
Or
Place the handset in the
o'adle to hang up
If you used speakerphone,
You should press Answer!
Intercom button on the
base unit to hang up.
PROBLEM
CHECK POINT
The portable unit
does not work.
0 Disconnect the AC adaptor from the base unit and reconnect
it.
0 Check the telephone line connection.
0 The handset battery voltage is low.
Charge the battery fully.
~ Be sure the ‘TONE/PULSE' switch is correct.
0 You are too far from the base unit.
Check if the voltage of the AC adaptor is incorredly set
Sound flutters or
fades
The antenna is not fully extended.
You are too far from the base unit.
Do not place the unit near electric goods such as TV.
The unit
does not ring
Confirm the unit plugged into the AC power and telephone
line.
Press the Talk button on the handset.‘
The handset battery voltage is low.
Charge the battery fullyl
Interference
The unit is encountering
from another unit
0 Press the channel button
Set the unit away from other electric appliance

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:11:03 15:28:15
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1999:11:03 15:27:59
Page Count                      : 11

EXIF Metadata provided by EXIF.tools