E SURE Technology S100 Mobile Phone User Manual S100 User s Guide 100906

Shenzhen E-SURE Technology Co., Ltd. Mobile Phone S100 User s Guide 100906

User Manual

Download: E SURE Technology S100 Mobile Phone User Manual S100 User s Guide 100906
Mirror Download [FCC.gov]E SURE Technology S100 Mobile Phone User Manual S100 User s Guide 100906
Document ID1378975
Application ID1v4i8hJGQF+e61afp5FU4g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize53.13kB (664079 bits)
Date Submitted2010-11-19 00:00:00
Date Available2010-11-19 00:00:00
Creation Date2010-10-29 10:26:41
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2010-11-18 14:09:48
Document TitleMicrosoft Word - S100 User's Guide_100906
Document CreatorPScript5.dll Version 5.2.2
Document Author: eason

User’s Guide for GSM/GPRS
Digital Mobile Phone
This Manual is correct in the contents when it is published,
Some contents in the Manual are possibly distinguished from
the real phone and will be different according to the included
software, SIM cards and service providers.
User's Guide
2.1
2.2
2.2.1
2.2.2
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.9.1
3.9.2
3.9.3
3.9.4
4.1
4.1.1
4.1.2
4.1.3
4.1.4
Tables of Contents
Important Precaution & Security Measures ........ 6
Your Phone ........................................................ 9
Technical Reference Parameters ..................... 11
Phone Componential Drawing.......................... 12
Key Description and Function Introduction ....... 12
Icons ................................................................ 14
Begin to Use .................................................... 16
Power Phone on/off .......................................... 16
Installation and Pull-out of Battery.................... 17
Installation and Pull-out of SIM Card SIM ........ 18
Installation and Pull-out of Memory Card ......... 18
Use Method of USB&Data Cable ..................... 19
Web Camera .................................................... 20
Charging Battery .............................................. 21
Use Earphone .................................................. 23
Security Password ........................................... 23
PIN ................................................................... 23
PIN2 ................................................................. 23
PUK.................................................................. 24
Phone Password .............................................. 24
Guidance for Quick Use ................................... 26
Calling Function ............................................... 26
Dial ................................................................... 26
Status of Dialing ............................................... 28
Status of Dialing out ......................................... 29
Answering Incoming Calls ................................ 29
User's Guide
4.1.5
4.1.6
4.1.7
4.1.8
4.1.9
4.1.10
4.2
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
5.1
5.2
5.2.1
5.3
5.4
5.4.1
5.4.2
5.4.3
5.5
5.5.1
5.5.2
5.6
5.6.1
View Missed Incoming Calls............................. 30
Dial Domestic Calls .......................................... 30
Dial Fixed Extension Telephone ....................... 31
Dial International Calls ..................................... 32
Call Option ....................................................... 33
Adjust Volume .................................................. 34
Input Text.......................................................... 34
Handwriting Input Method ................................ 35
Smart English Capital Letter Input Method ....... 36
Smart English Lowercase Letter Input Method. 36
English Capital Letter Input Method ................. 37
English Lowercase Input Method ..................... 38
Number Input Method ...................................... 38
Functional Menu............................................... 39
File Management ............................................. 40
Phonebook ....................................................... 41
Add New Contact ............................................. 41
Entertainment and Games ............................... 42
Extra................................................................. 46
Calculator ......................................................... 46
Conversion of Exchange of Currency............... 47
E-book .............................................................. 47
Call Center ....................................................... 47
Call Log ............................................................ 47
General Call Setting ......................................... 50
Message Center .............................................. 58
SMS ................................................................. 58
User's Guide
5.6.2
5.6.3
5.6.4
5.6.5
5.6.6
5.6.7
5.7
5.7.1
5.7.2
5.7.3
5.7.4
5.7.5
5.7.6
5.7.7
5.8
5.8.1
5.8.2
5.8.3
5.8.4
5.9
5.9.1
5.9.2
5.9.3
5.9.4
5.10
5.10.2
5.10.3
MMS................................................................. 65
Chat ................................................................. 70
Information Enquiry .......................................... 70
Voice Mailbox ................................................... 71
Email ................................................................ 62
Cell Broadcast .................................................. 72
Multimedia ........................................................ 72
Camera ............................................................ 73
Image setting.................................................... 73
Recorder .......................................................... 74
Video Player ..................................................... 75
Sound Effects ................................................... 76
Digital Video Camera ....................................... 68
Music Player .................................................... 78
Services ........................................................... 79
STK Service ..................................................... 79
WAP ................................................................. 79
Account Data.................................................... 81
Wireless LAN ................................................... 81
Organizer ......................................................... 75
E-book .............................................................. 81
Calendar .......................................................... 82
Alarm Clock ...................................................... 83
Universal Time ................................................. 83
Setting .............................................................. 83
Phone Setting................................................... 84
Display setting .................................................. 85
User's Guide
5.10.4
5.10.5
5.10.6
5.10.7
5.11
5.12
7.1
7.2
7.3
Network Setting ................................................ 86
Security Setting ................................................ 87
Recovery of Default Setting ............................. 89
Sound Effects ................................................... 89
User Profile ...................................................... 90
Bluetooth .......................................................... 76
FAQ and Troubleshooting Solution................... 93
Reference Information ...................................... 92
Access Password ............................................. 92
Health&Safety Information ............................... 92
Explanation of Terms ........................................ 96
User's Guide
Important Precaution & Security Measures
Please carefully read and abide by the brief instruction
as follows so as to beware of the risks and offences of
the laws. See also Health information and Safety for
detailed safety information.
Traffic Safety Is the First
Please do not use the phone when driving and should
use the phone after parting the vehicle.
Please power off the phone when fueling
Please do not use the phone at the gas stations or the
place adjacent to the flammable articles or chemicals.
Please power off the phone when onboard the plane
To use the phone onboard the plane not only breaks the
laws but also engenders the dangers because the signal
User's Guide
interference of the phone.
Please power off the phone in the hospital
Please abide by various regulations and rules of the
hospital and power off the phone at or near to the
hospital equipment.
Interference
The mobile communication may be disturbed by the
radio disturbance, which can impact the performance
of the phone.
Abide by the special regulations
Please abide by the special regulations to power off the
phone at any place where the phone is prohibited using
or the phone may be cause the interference or risks
(such as in the hospital).
Reasonable Utilization of Phone
Please use the phone at the normal human body
User's Guide
position (close to ears) and should not touch the
antenna without reasons.
Accessories and Batteries
Please only use the dedicated accessories and batteries
for phones.
Specialized Services
The phone should be installed or maintained by the
specialized service personnel.
User's Guide
Your Phone
Thank you for your choice of our GSM/GPRS digital
mobile phone with a touch screen .You can
comprehensively understand how to use this phone and
appreciate the perfect functions of the phone and the
concise operation style through this manual.
The mobile phone with the touch screen is designed for
the GSM/GPRS network environment. Besides the
basic calling function, the phone will provide you with
diversified and practical functions, such as the smart
Chinese-English
input
method,
business-card
phonebook, personal 64-chord incoming call ringtones,
incoming call photo, clock/alarm clock, camera, music
player, video player, U-disk, Memory card(T-flash
card),
recorder,
calculator,
function
of
timely
powering-on/off, to-do list, GPRS access to network,
MMS, hand-free call and so on for your convenient
work and leisure activities. Additionally, the phone
User's Guide
adopts the individualized man-machine interface
design and satisfies your different demands with the
perfect functions. The mono-standby version with a
touch screen has subjected to the authoritative
accreditation in conformity with the GSM/GPRS
technical standard.
Our company reserves the right to revise the contents
in this Manual without any notification in advance.
In addition, the application services of this version are
furnished by the service providers. Our company will
undertake no disputes or legal responsibilities due to
the legal and healthful contents because our company
saves and controls or revises no built-in or updated
instruction or websites of a third party. Please consult
with or lodge the complaints to the related service
providers or operators if there is any doubt.
10
User's Guide
2.1
Technical Reference Parameters
Model
S100
Dimension
63*12.5*115
(Hieght×Width×Thickness)
Weight
Standby time
350 Hour(According to local
internet condition)
Call time
450Min(According to local
internet condition)
Display screen
2.36 ″TFT
Camera
0.3 Mg
Mobile phone memory
N/A
Memory card
T-Flash card
USB data cable
USB 5pin
Earphone
Stereo phone
11
User's Guide
2.2
2.2.1
Phone Componential Drawing
Key Description and Function Introduction
Key Name
Left Soft Key
Right Soft Key
Dial key
Introduction
to
Key
Function( Under standby mode)
Enter in the main menu window
Enter in the call log
Enter in mixed call log list of SIM card
Press to terminate the call or decline
the incoming call
End key
Press and hold to power the phone
off( or power the phone on under the
powering-off mode)
Up
Customize by customer
Down Customize by customer
Navigati Left
Customize by customer
on Keys Right Customize by customer
OK
Enter main menu; Select
Press to enter in the dialing and
inputting window, and input number 0
Numeric
Press to enter in the dialing and
al Keys
inputting window, and input number 1
Press and hold to enter in setting up
12
User's Guide
Input
window
Note:
the voice mailbox number
Press to enter in the dialing and
2-9 inputting window, and input number
2~9
Press to enter in the dialing and
inputting window, and input *
Press and hold to shift inputting * ,+,
P and W
Press to enter in the dialing and
inputting window, and input #
Press and hold to shift amid Mute
mode/Other Mode
A~Z Input alphabet A~Z
Alt Switch to symble mode
Space input space
Sym Open symble selection screen
aA switch input method
1. lock and unlock: Right soft key+#;
2. The Press in the manual means pressing
the key and releasing the key immediately; the Press
and Hold means pressing the keys for 2 seconds or
above.
13
User's Guide
2.2.2
Icons
Icons
Description
Indicate the network signal strength of SIM card
Indicate the network signal strength of SIM card.
Indicate the main battery capacity. The more bars
are, the more sufficient battery capacity is.
The alarm clock is activated; the icon will not
appear if the alarm clock is deactivated.
The keypad is locked. This icon will appear if
the keypad is not locked.
There is unread message, the icon will not
appear if there is not unread message or the
memory capacity is not full.
There is unread MMS, the icon will not appear if
there is not unread message or the memory
capacity is not full.
General Mode
Conference Mode
14
User's Guide
Outdoor Mode
Indoor Mode
Earphone Mode
Bluetooth Mode
Mute Mode
Use SIM
15
User's Guide
Begin to Use
3.1
Power Phone on/off
Please press and hold the end key to power the phone
on/off.
There will be two states shown if you power the phone
on without SIM card inserted:
“Inserting SIM card” ―show that there is no
SIM card, but you can call 112 numbers.
“Unlock” ― if you set the phone lock and SIM
card password.
After the SIM card is inserted, the phone will
automatically check whether the SIM card is available
or not, the screen will display the prompts in sequence
as follows:
1. “Input phone lock password” ―if you set the
phone lock.
2. “Input PIN” ― if you see the SIM card
16
User's Guide
password.
3. “Limited to emergency call (limited to calling
112)” ―show that the other network is registered onto
and only 112 numbers can be dialed out.
4. “Search” ― the phone will search until the
appropriate network is uplinked.
3.2
Installation and Pull-out of Battery
(Please secure that the phone is powered off)
„
Pulling out battery according procedures as
follows:
Firstly, pull out the outer cover of the battery
downwards;
And then, pull out the battery by lifting the lower end
of the battery.
„
Installing the battery according to the procedures
as follows:
When at installation, clamp the upper end of the battery
in the socket, push the lower end of the battery till the
battery cannot be pushed, finally, push the battery
17
User's Guide
cover onto the socket till hearing the “click” sound.
3.3 Installation and Pull-out of SIM Card
This version is a mono-standby phone which can
be inserted with SIM card.
Power off the phone, and remove the battery and
other external power supply.
Insert the SIM card with the metal end towards
inside and metal surface downwards in parallel.
When you want to pull out the SIM card, firstly
power the phone off, remove the battery and pull out
the SIM card from socket.
3.4
Installation and Pull-out of Memory Card
The phone supports the T-Flash card (otherwise
purchased), which is a multimedia memory card used
to multiple the memory of the phone. The T-flash card
is small and should be pulled out and installed
18
User's Guide
carefully and prudently in order to avoid in damaging.
Note: if the T-Flash card is not a type of plug and play,
the prompt will not pop up.
T-Flash card is installed as follows:
1. You will see the slot for card after opening
the rear cover and pulling out the battery.
2. Open the cover outside the slot for the
T-Flash card outwards, align and insert the
T-Flash card in the slot with the T-Flash chip
in the slot till it cannot be pushed.
3. Finally cover the slot for the T-Flash card
3.5
Use Method of USB&Data Cable
This version supports the USB interface. You can
connect your phone with the PC via the USB&data
cable, copying or moving the files amid the phone and
PC, or browsing the images, record files and video
files saved in the phone via the PC. The USB& data
cable is used as follows: inserting one terminal of it in
the USB interface of PC and connect the other
19
User's Guide
terminal of it to the Charge/USB&data Cable
Interface at the right side of the phone.
3.6
Web Camera
This version supports the Web Camera function and
you can perform as follows:
First, if windows 98/2000/XP operating system is
configured in your PC, please install the web camera
driver firstly as follows:
Place the driver dist in the PC, power the phone off,
insert the USB&data cable in the interface at the
right side of the pone, select Web Camera in the
popped USB setting menu, press OK , pop up the
dialog box of Guide for Newly Found Hardware,
press Next, set up the designated position as the
driver disk by selecting the default value, press
Next to finish, and then you can enter in the web
camera.
20
User's Guide
3.7
Charging Battery
1. Insert the adapter in the power supply.
2. Insert the connector of the adapter in the
Adapter/USB data cable port at the right side of
the phone. And this time, the battery capacity
indicating icon at the left-up corner of the phone
screen can flash.
3. If the phone is powered off at charging, the
screen will display the charging animation which
means the phone is at charging state.
4. If the power is still used when the battery
capacity is insufficient, it will take a long time
for the charging indication icon to be shown on
the screen.
5. When the charging indication icon at the
right-up corner of the phone screen does not
flash and displays that the battery is charged
fully. If the phone is charged when powered off,
the icon of full battery capacity will display on
21
User's Guide
the phone screen. Generally, it takes 2-3 hours
for the charging process.
6. During the charging, the heated battery,
phone and adapter are normal.
7. After finishing charging, please disconnect
the AC power supply socket and phone with the
adapter.
Caution: It is not recommended to insert USB line and
charger at the same time; The battery of this version is
charged by approximately 50% capacity and can be used
after being unpacked. Please use the battery after
thoroughly using up the battery capacity and charging
the battery fully for the first time; and use it after
thoroughly using up the battery capacity and charging
the battery fully, thus the battery will attain the optimal
use status easily after this procedure is repeated for three
times.
22
User's Guide
3.8
Use Earphone
When you insert the earphone in the earphone
socket on the
side of the phone, the phone will
automatically be switched to the earphone mode. With
the configuration of the self-answering call, you can
answer the incoming call via earphone.
3.9
Security Password
3.9.1
PIN
PIN (Personal Identical Number) can prevent the
other persons from using your SIM card without your
approval.
3.9.2
PIN2
When you enter in the Call Toll and Fixed Dial,
please contact with the network operator in order to
23
User's Guide
determine whether your SIM card supports such
functions. If the PIN 2 is wrongly input for
successively 3 times, the PIN 2 will be locked and can
be unlocked by inputting the PUK 2. The PIN 2 may be
supplied along with the SIM card.
3.9.3
PUK
The PUK (Personal Unlock Key) is required to
input if the locked PIN is to be unlocked.
3.9.4
Phone Password
You can set the password for your phone in order
to prevent the phone from being used illegally. When
this function is selected, you should input the phone
password at each time of powering the phone on and
then you can dial in or dial out. The subscriber can
cancel the phone password, but the subscriber cannot
prevent the phone from being used illegally.
Input the phone password, delete the
24
User's Guide
wrongly-input numbers with the touch pencil and
finish the input by pressing the OK key. For example,
if your phone password is set as1122, you can input
1122. Providing that you forget your phone password,
you should contact with your detailer or the local
authorized maintenance &service center, which will
unlock your phone password.
25
User's Guide
Guidance for Quick Use
4.1
Calling Function
You can conduct the emergency call service at any
country where the digital GSM network is utilized if
you are within the coverage of the network (you can
know by checking the indicating bar of network signal
strength at the up-left corner of the phone screen).
“Emergency Call only “will display on your phone
screen if your network supplier does not provide the
roaming service at the present area in telling you that
you can conduct the emergency call only. You can
make an emergency call even if the phone is not
inserted the SIM card if you are within the coverage of
the network.
4.1.1
Dial
The information bar at the up-left corner of the
26
User's Guide
display screen shows the network signal strength
(wherein, 4 information bars indicate the maximum
information signal). A move within a small range can
enhance the signal strength effectively because the
calling quality is greatly subject to the barriers.
Please press the key of switching both SIM cards
to dial under the dual-card mode before dialing.
Dial in ways as follows:
Directly dial the number to make a call: enter in
the dialing window. Click the numerical keys with the
touch pencil or press the corresponding numerical keys
to input the phone numbers to be dialed in the
cursor-inputting box. And then click the dialing icon
with the touch pencil or press the dial key to dial out.
Dial the number listed in the phonebook: Under
the stand-by mode, press the right soft key to enter the
phonebook menu, and then click the Option button or
press the left soft key to select it, viewing the contact
info. Press the dial key to dial out.
Dial the number in the call log: under the stand-by
27
User's Guide
mode, press the left soft key to enter the main menu,
and then press the navigation keys to select the Call
Log, then enter in the Missed Call, Dialed Call and
Received Call window in the call log, select the log
with the touch pencil, enter in the Call Option window
and directly click the Dial button with the touch pencil
to dial out directly.
4.1.2
Status of Dialing
input any numerical key, entering the dialing status
while the signal and battery capacity indicators are
displayed and a flashing vertical line prompts the
location of the cursor.
When inputting and dialing, you can perform:
Press the dial key with the touch pencil to dial the input phone
number to activate SIM card 1 or dial phone number with SIM
card 2 .
28
User's Guide
4.1.3
Status of Dialing out
Under the dialing window, press the dial key to
enter the status of dialing out after inputting the phone
number. If the phone number is not listed in the
phonebook, the phone number of the opposite party
will display, or otherwise the name will display. If the
phone number is saved in the phone, the type
(phone/home/office ), E-mail, big head icon for
incoming call and group will display.
During the dialing out, press the end key to hang
up the present call during the dialing course.
4.1.4
Answering Incoming Calls
When there is an incoming call from the opposite party,
the phone enters the incoming call window, rings or
vibrates based on the present ring settings.
29
User's Guide
4.1.5
View Missed Incoming Calls
You can select the Call Log in the main menu window,
click the Call Log with the touch pencil or press the
left soft key to select it, select a missed cal to view it
under the call log list.
4.1.6
Dial Domestic Calls
You can dial out simply: input the phone number
with the numerical keys (please affix the district
number if you dial the domestic phone number), and
then press the dial key or click the Dialing icon with
the touch pencil to dial out. If you need to alter the
phone number, you can cancel a number or character
previous to the cursor with the touch pencil or move
the cursor to the position of the character or numbers to
be removed to delete or alter it with the left and right
navigation keys. You can click Delete button with the
touch pencil or press the right soft key to select it,
30
User's Guide
modifying the character or number. The screen will
display that the phone is under the dialing-out and will
display the call status information if the opposite party
hangs up the phone.
Please press the end key to terminate the call after
the call is ended.
Dial the domestic call: district number + phone
number +Dial Key.
4.1.7
Dial Fixed Extension Telephone
Some fixed extension phone cannot be dialed out
directly. You are required to dial the telephone
exchange firstly and dial the extension phone secondly.
If you interpolate the character “P” for pause between
the telephone exchange and the extension phone when
you input the phone number, the phone will finish all
the dialing procedures and dial the extension phone out
for you automatically. The character “P” is input as
follows: under the dialing window, input the character
31
User's Guide
“P” by pressing “*” for three times after the phone
number is input.
Dial the fixed extension phone as follows:
District number + telephone exchange number +
“P” + extension phone number + Dial Key
4.1.8
Dial International Calls
Under the dialing window, input “+” by pressing
“*” key for two times and display the affix “+” of the
international long-distance call. This allows you to dial
out from any country when you do not know the
international call affix of the local region (such as, 00
for the international call affix of China).
After input the affix, input the integral phone
number with the country code.
Dial the international call as follows: “+” country
code + integral phone number + Dial Key
32
User's Guide
4.1.9
Call Option
Under the calling window, click the Option with the
touch pencil or press the left soft key to select it to
enter in the call option window. The call option can be
discovered only during the call, furthermore the
functions, such as Incoming Call Forward , Call to
Many, Call Hold , Call Waiting and so on, require the
support of the network, so please contact with your
network supplier for these functions.
You can operate under the call option menu as follows:
„
Pause: temporarily stoop a call in the Call To
Many operation.
„
End: end the current call.
„
New call: temporarily stop a call and dial a new
call in the Call to Many.
„
Phonebook: enter in the phonebook menu.
„
SMS: enter in the SMS menu.
„
Recorder: record the call.
„
Mute/Recovery: open or close the mute mode.
33
User's Guide
„
DTMF: send the DTMF signal
„
Distorted voice: Set the call voice mode; the
opposite party will hear the alternated voice based
on the setting
Note: 1. some menu options can only pop up under the
specific conditions or are required the support of the
local network.
4.1.10 Adjust Volume
Press the up & down left side key to tune up the
volume of the microphone.
4.2
Input Text
The phone has 7 input methods in total, respectively,
Smart English Lower Case Letter, Smart English
Capital Letter, English Capital Letter, English Lower
Case Letter and Number in addition to the handwriting
input method. Under the text input window, click the
input method icon at the bottom of the screen with the
34
User's Guide
touch pencil or press the “#” key to select from the
different input methods. You can click to move the
cursor for the editing position with the touch pencil at
the editing area where the cursor flashes. The functions
of the following 4 commonly-used icons are:
: input a space character;
: evoke the handwriting input keypad;
:evoke the punctuation keypad;
:line feed;
Hereinafter the input methods are introduced.
4.2.1
Handwriting Input Method
Under the window, handwrite to input the Chinese
characters, capital and lowercase English letters and
numbers. Click the input method at the bottom of the
screen with the touch pencil to select the corresponding
input method. The displayed characters by handwriting
are the characters shown by the icon.
35
User's Guide
4.2.2
Smart English Capital Letter Input Method
Click the
ABC icon with the touch pencil or press
the # key to select the Smart Capital English Input
Method. You can get the wanted capital English letters
by pressing the corresponding numerical keys to input
the English letters according to the word sequence or
handwrite to input the capital English letters. This input
method will analyze the input English letters
automatically and display the right words automatically,
speeding up the input.
4.2.3
Smart English Lowercase Letter Input
Method
Click the
abc icon with the touch pencil or press the
# key to select the Smart Lowercase English Input
36
User's Guide
Method. You can get the wanted lowercase English
letters by pressing the corresponding numerical keys to
input the English letters according to the word
sequence or handwrite to input the lowercase English
letters. This input method will analyze the input
English letters automatically and display the right
words automatically, speeding up the input.
4.2.4
English Capital Letter Input Method
Click the
ABC icon with the touch pencil or press#
key to select the Capital English Input Method. You
can get the wanted capital English letters by pressing
the corresponding numerical keys to input the English
letters according to the word sequence or handwrite to
input the capital English letters.
37
User's Guide
4.2.5
English Lowercase Input Method
Click the
abc icon with the touch pencil or press the #
key to select the Lowercase English Input Method. You
can get the wanted capital English letters by pressing
the corresponding numerical keys to input the English
letters according to the word sequence or handwrite to
input the lowercase English letters.
4.2.6
Number Input Method
Click the
123 icon with the touch pencil or press the #
key to select the Number Input Method. You can input
the wanted numbers or handwrite to input the numbers.
38
User's Guide
5.1
Functional Menu
File Management
Under the main menu window, click File Management
Icon with the touch pencil or press the left soft key to
select it, entering in the file management window. In
the file management menu, you can view the data
saved in the T-Flash card. After the T-Flash card is
inserted, there are 3 operating window pertaining to the
file: Open, New and Formatting. Please confirm the
store path when opening the folder.
„ Total capacity: T-Flash card-based extension
capacity
„ Ring file: mp3/midi/amr/wav
„ Image file: BMP, GIF and JPG
„ Video file: AVI,3GP.MP4
„ Graphics file: support setting the graphics file as
wallpaper.
Ringtone File: set the incoming call ringtone.
39
User's Guide
5.2
Phonebook
With the phone, you can use the business card
phonebook. The phone can save 300 phone numbers
and the quantity of the saved phone numbers in the
SIM card is depended on the SIM card. The IP dialing
function is supported.
Under the main menu window, click the Phonebook
with the touch pencil or press the up and down
navigation keys to select it, enter in the phonebook
window to perform:
5.2.1
Add New Contact
Under phonebook window, click the Add button with
the touch pencil or press the left soft key to select it.
After selecting the store position with the up and down
navigation keys or the up and down left side key, press
the Edit menu to enter in the window of inputting the
name and phone number, select the Finish menu in the
option menu and press the OK button after finishing
40
User's Guide
input. And then, if selecting NO button, not save the
input information and return to the phonebook window;
if selecting the Yes button, save the input information.
Now you can enter in the detailed contact info window
if it is a phone number saved, and you can continue to
edit other info entries under the detailed contact info
window.
Under the detailed contact info window, after finishing
inputting all the information, click the Finish button
with the touch pencil or press the left soft key to select
it, click the Yes button with the touch pencil or press
the left soft key to select it, saving the added contact.
Click the NO button with the touch pencil or press the
right soft key to select it, not saving the added contact
and returning to the phonebook window.
5.3
Entertainment and Games
From the standby interface, press the left soft key or
the OK key of the directional keys and then choose
Entertainment and Games to enter the interface.
„ Under Games menu, there are two or three
41
User's Guide
color-displayed dynamic games (the content
varies with the model). Background sound effects,
sound effects and vibration can be set for the
games.
¾
After entering into a game, in light of the
prompts on the screen, you can start a new game,
inquire the rank of top scores, or get to know the
rules through Help.
¾
Pause is allowed in the middle of playing and
confirmation is required before exit. The game
automatically pauses if there is an incoming
message or call.
¾
Press the right soft key to pause.
¾
The right soft key can also be used for
upgrade, win, game-over and rank. Different
sound effects are applied to indicate win,
game-over, gaining or loosing scores, or getting
listed.
„ Java:Through Java, you can set some programs to
expand the function of the phone, such as chat,
game ,electronic book, stock software ,etc .
The phone only support jar and jad format(some
software need both of them)
game ,electronic book, stock software ,etc .
„ Daily jokes: press left soft key “Options” to get all
kinds of jokes.
42
User's Guide
„
„
Flow points statistic: enter the sub menu, check
the data flow of GPRS network including check
the GPRS data flow of “upload” and “download”
(with Byte as unit) and empty the said records
with “reset”.
Help and setting: setting menu and instruction
information of the built-in network.
„ Network Setting
The contents in this section are related to the network
supplier. Please contact with your network supplier when
using this function. If you want to access to a network
which has no roaming protocol with your original home
network, the phone will display that you can dial the
emergency call only.
Note:
The practical tools under the Entertainment menu
will generate GPRS traffic. Before use, please make sure
your GPRS settings are correct and confirm the
corresponding toll with the carrier you have chosen.
43
User's Guide
5.4
5.4.1
Extra
Calculator
You can use the build-in calculator to carry the simple
operations, such as adding ,deducting, multiplying and
dividing. Under the stand-by mode, click with the
touch pencil or press the left soft key to enter in the
main menu, and then select the Organizer/Calculator in
sequence to enter in the calculator window. You can
press the number 0-9 keys to input the numbers press
the up, down, left and right navigation keys to select
wanted operation. Click the Clear button with the touch
pencil or press the right soft key to select the Cancel
button to clear away the recently input or result. Click
the OK key or press the left soft key for the results,
Click the back button or press the left soft key for the
results, Click the Back button or press the left key for
the results, Click the Back button or press the right soft
key to leave the calculator window.
44
User's Guide
5.4.2
Conversion of Exchange of Currency
Convert the exchange of currency.
5.4.3
E-book
With this function, you can read stories, newspaper and
magazine, realizing the reading function with the
phone. You can read the .txt files.
5.5
Call Center
Your phone saves the information of all calls from the
time when you began to use the phone to the last time
of call. You can click OK with the touch pencil or press
the left soft key to enter in Call Center, where there are
options: Call Log and Generic Call.
5.5.1
Call Log
Call Log of SIM:
„
Missed calls
45
User's Guide
„
Dialed Calls
„
Answered Calls
The aforementioned items can be selected and operated
by pressing the left soft key, such as View, Delete, Save,
Dial, Edit, Send SMS and MMS.
„
Delete call log: delete the missed calls, dialed
calls, answered calls or delete all. When at
deletion, the VIP password, which is 1122 in
default, will be wanted.
„
Call time: press the left soft key for confirmation
to select and view the Last Call Time, Total
Dialed Call Time, Total Received Call Time and
Clear Time.
„
Call Toll: press the left soft key for confirmation
to select and view the Last Call Toll, Total Call
Toll, Clear Toll, Limited to Price and Toll Rate.
„
Message counter: press the left soft key for OK
button, selecting to view the quantity of the sent
or received message.
„
GPRS counter: press the left soft key for
46
User's Guide
confirmation o select and view the Last Sent, Last
Received, Total Sent, Total Received and Clear.
5.5.2
General Call Setting
„
SIM Call Setting
♦
Local phone number: set up whether the opposite
party can display your phone number. Press the up
and down navigation keys to select the System
Setup, Conceal Number and Send Number.
♦
Call Waiting: after this function is launched, the
network will inform you for the newly incoming
call during the call. Please contact with your
network operator for details. Perform as follows:
¾ Launch: launch the Call Wait function.
¾ Close: not launch this function.
¾ Enquire: view the present status of this function.
♦
Call Diverting: divert the incoming call of a service
to a designated phone number under the presetting
condition in the function of forwarding the network
47
User's Guide
service. Please contact with your network supplier
to launch this function.
Set up to forward an incoming call to a preset phone
number under the 5 options, including Unconditionally,
Not Accessed, No Answer, On Busy and All. One of the
foregoing five options can be selected based on demand
and each option is performed as follows:
¾ Launch: press OK button to launch the present
forwarding function, and then designate the
phone number, which can be input directly or
searched in the phonebook, press OK button to
finish the setup.
¾ Close; Not launch the forwarding function.
¾ Enquiry: view the present forwarding function
status.
Cancel forwarding: press the up and down
navigation keys to select the present service or
cancel all the registered forwarding services.
♦
Call Restriction: (under the dual-card mode, the
window of selecting SIM card appears after
48
User's Guide
entering the call restriction menu) with this function,
you can perform as follows:
Barring of Outgoing calls
All calls: barring of dialing all calls out
accepting the emergency call.
International call: barring of dialing the
international call out.
International Calls except domestic calls: the
subscriber can only outgo the call to the
countries where the subscriber is located or to
the home country (the country where the
home network is located) when the subscriber
roams outside the home country. Please
contact with the network operator for details.
Barring of Incoming Calls
All calls: barring of all incoming calls.
Roamed incoming calls: barring of the
incoming during roaming.
The submenu of each foregoing option is identical
as follows:
49
User's Guide
¾ Launch: require to input the password firstly, and
then launch the call restriction function.
¾ Close: ditto, firstly input the password, and then
close the call restriction function.
¾ Enquiry: view the present barring status of
incoming calls.
Cancel restriction: cancel all call restrictions.
Change password: modify the password of barring
of dialing out/in.
Note: some configurations require the support of
the network. The call restriction function will be
valid after the local network and SIM card launch
it.
♦
Switch to Line: shift amid the Line 1 and 2.
♦
Close group: group a number of subscribers and
limit
the
communication
of
the
designated
subscriber group.
♦
Auto redial: set up whether the phone is redialed
when the call is not connected. Press the
Activate/Deactivate button to launch or shut down
the function. Close group: group a number of
50
User's Guide
subscribers and limit the communication of the
designated subscriber group.
♦
Quick dial setting : set up dialing quickly under the
standby mode, press the OK button to enter in the
setting window.
♦
IP dial: Input IP number, press OK button to
activate and finish the setup, perform the Cancel
and Edit option for IP umber. After the IP number
is set up, you can use the IP function in the
phonebook, automatically affix the IP number to the
phone number and dial it out.
♦
Blacklist: input the phone number to be refused or
press the OK button enter in the contact phone
number window for choice, save the phone number
in the blacklist, set its Open/Close status, and filter
it when there is an incoming call or this phone
number automatically.
♦
More: call time display, call minute display and
auto time limit.
51
User's Guide
5.6
Message Center
5.6.1
SMS
Please click the SMS with the touch pencil or press
directional key to select it, entering in the SMS menu
when you require the SMS service.
„
Inbox
Press the left soft key to select the Message Center,
then SMS , and finally the Inbox menu.
Under the standby window, enter in the main menu
window or press the left soft key to select Message
Center, SMS and then Inbox.
After entering in the inbox, select the name of the
sender, Click OK button with the touch pencil or press
the left soft key for confirmation to view the SMS;
Select Back button to return to the SMS window; Click
OK with the touch pencil or press the left soft key to
view the present SMS, and then click with the touch
pencil or press the left soft key to enter into the
52
User's Guide
following items:
¾ Reply: reply the message to the sender;
¾ Delete: delete the current entry of the message;
¾ Edit: edit or revise the current entry of the
message;
¾ Forward: forward the current entry to other;
¾ Copy to phone: you can copy the current SMS to
the phone memory.
¾ Move to phone: you can move the current SMS to
the phone memory.
¾ Chat: you can enter in the chat-room to chat with
sender after entering in the chat menu. The chat
message presents in conversation.
¾ Selectively Delete: optionally delete the message
in the inbox based on the user’s inclination.
¾ Delete all: delete all messages in the inbox.
¾ Copy all: copy all SMS from the phone to the SIM
card, or from the SIM card to the phone.
¾ Move all: move all SMS from the phone to the
SIM card or from the SIM card to the phone.
53
User's Guide
¾ Extract number: use the numbers in the message.
¾ Website Link: you can open the linked website in
the received message.
Note: 1. Each entry of SMS will display which SIM
card it will be displayed in.
„
Outbox
Similarly enter in the outbox in the way entering
in the inbox.
After entering the outbox, you can see the sent
message and saved unsent message, select the
message to be sent, click OK button with the
touch pencil or press the left soft key to select it.
Select the Option menu after read the message to
carry on the related operations.
¾ Send from SIM: send the current message to
others; or send to many or send in group
optionally.
¾ Edit: edit or revise the current entry of the
message;
54
User's Guide
¾ Delete: delete the current entry of the message;
¾ Copy to phone: you can copy the current SMS to
the phone memory.
¾ Move to phone: you can move the current SMS to
the phone memory.
¾ Delete all: delete all message in the inbox.
¾ Copy all: copy all SMS from the phone to the SIM
card, or from the SIM card to the phone.
¾ Move all: move all SMS from the phone to the
SIM card or from the SIM card to the phone.
¾ Extract number: use the numbers in the message.
¾ Website Link: you can open the linked website in
the received message.
„
Create SMS
Similarly enter in the Create MSM in the way
entering in the inbox.
After entering the Window of writing the
message, you can perform as follows:
¾ During edition, press the # key to select the
wanted input method including, Smart English
55
User's Guide
Capital Letter Input Method, Capital English,
Lowercase English, Number and Handwriting
input methods.
¾ During input of message, click Option button with
the touch pencil or press the left soft key to enter it,
Use Template, Insert Object, Character Format,
Insert Phone Number, Insert Name, Insert
Bookmark and Input Method. After editing, if you
want to delete the written contents, you can move
the cursor after the final letter or character and
click the Clear with the touch pencil or press the
right soft key to select it, clearing the contents.
After finishing the input, click the Finish button or
press the left soft key to select it, entering in the
sending options. Then you can select Send,, Save
and Send, Save, Send to Many and Send in Group.
When in sending the message( under the dual-card
mode, after selecting Send menu, the window of
selecting SIM card will display, and you can send
the message after making choice. Click OK button
56
User's Guide
with the touch pencil or press the left soft key to
select it, directly input the phone number to be
sent to or click to search with the touch pencil
under the window of the phone number to be sent
to. After finishing choice, click the OK button
with the touch pencil or press the soft key to select
it, sending the message.
¾ After finishing in sending, return to the message
window. If the message report is set, the message
report will reply after the message succeeds in
sending. You can set the message report by the
path of Message Setting/ Status Setting, and click
the box before the Message Report to set up.
Note: please refer to the input methods described
above.
„
Template
Directly select the templates or click Option with the
touch pencil or press the left soft key to Edit, Delete
and Create SMS from template.
57
User's Guide
5.6.2
MMS
Your phone can send or receive the MMS. With the
MMS service, you can send the message containing
images, voices and texts.
When you are sending MMS, your addressee should
use a phone with MMS function to see your MMS.
„
Create MMS
Select Create MMS and input the related MMS:
¾ Addressee: set the phone number or E-mail of
addressee.
¾ Copy to: set the phone number and E-mail to be
copied to.
¾ BCC: set the phone number or E-mail to be copied
to secretly.
¾ Subject: set the MMS subject.
¾ Edit: edit the MMS; the subscriber can add the
text, image, voice and attachment, or add new
page before, add new page after, add bookmark
text, preview, interval(s).
After the related MMS is input, click Finish with the
touch pencil to select it to enter in the next option.
¾ Send: send the edited MMS.
¾ Save and send: send the MMS after saving it in the
58
User's Guide
outbox.
¾ Save to draft: send the MMS in the draft-box for
future sending.
¾ Send option: set the sending option of the current
MMS.
¾ Exit: leave editing the Current MMS. The prompt
info will pop up to enquire the user whether the
current SMS is saved or not.
Under the sending-number window, directly input the
wanted phone number, or click Search with the touch
pencil or press the left soft key to select it. Select the
related contact in the window of viewing the
phonebook, press Finish, click OK with the touch
pencil or press the left soft key to send it.
„
Inbox
This menu lets you view your received MMS. Select
one entry of SMS and press left soft key to enter in
options:
¾ View: view the MMS.
¾ Reply: reply the MMS to sender.
¾ SMS reply: reply the SMS to sender.
¾ Reply to all: reply to all listed in the Sender,
Addressee and Copy To columns.
59
User's Guide
¾ Forward: forward the MMS to others.
¾ Delete: delete the selected MMS .
¾ Delete all: delete all selected MMS in the inbox.
¾ Details: view the sender, subject, date and size of
the current MMS.
¾ Extract number: use the phone number in the
MMS.
„ Outbox
This menu lets you save and operate the MMS after it
saved and sent as follows:
¾ View: view the MMS.
¾ Forward: forward the selected MMS to others. If
the MMS fails in sending, “Resend” will be
displayed.
¾ Edit: edit the sent MMS.
¾ Delete : delete the selected MMS.
¾ Delete all: delete all MMS in the outbox.
¾ Detail: view the sender, receiver, copy to, BBC to,
subject, date and size of MMS.
¾ Extract number: use the phone number in the
MMS.
„ Draft
This menu lists your created and saved MMS as draft.
You can perform for some MMS as follows:
¾ View: view the MMS.
60
User's Guide
¾ Send: send the selected MMS.
¾ Edit: edit the sent MMS.
¾ Delete : delete the selected MMS.
¾ Delete all: delete all MMS in the outbox.
¾ Detail: view the sender, copy to, BBC to, receiver,
subject, date and size of MMS.
¾ Extract number: use the phone number in the
MMS.
Note: if the MMS in the draft is not set with the
receiver, there will be no Send option in the option
menu.
„
MMS Setting
This menu lets you set up the configuration of sent and
received MMS.
¾ Edit setting: use to set up the Edit Mode and
Autograph for MMS.
¾ Send setting: use to set up Send Report, Read
Report, Priority, Interval(S) and Send Time
during the use period of sent MMS.
¾ Receive setting: use to set up the local network
receiving the MMS, roaming network, send
report and permitting sending report.
¾ Filter: use to set the anonymous sender and ad
61
User's Guide
message.
¾ Server
setting:
use
to
configure
the
MMS-required network. Please contact with
network supplier for configuration method.
¾ Capacity enquiry: the user can view the MMS store
status.
5.6.3
Chat
You can chat with the designated friends in chat-room. The
chat message presents in conversation.
5.6.4
Information Enquiry
The Information Enquiry is a value-added service
supplied for the users. The user can enter in the
message world to optionally view the service
instruction. If such service is required to launch, the
user can click the OK button with the touch pencil or
press the left soft key to select it, sending the SMS of
launching the Infinite Mobile Service to the SMS
62
User's Guide
service center.
Note: if the user requires canceling the related service,
the user can close the service optionally, sending the
SMS of stopping message world service to the SMS
service center.
5.6.5
Voice Mailbox
This service is offered by network operator. The user
should set up the voice mailbox number to receive the
message.
5.6.6
Email
Please set up your email account before you use it.
Send and receive: sending of messages in Outbox and
receive new messages automatic.
New email: edit a new message.
Inbox: Display all received mail of the current account.
Outbox: Show all outgoing mail of the current account.
Draft: editing unsent messages will be saved in the
draft.
63
User's Guide
Delete all: delete the current account in the specified
mailbox or all of the mailbox email.
Delete all marked: Remove the current account of the
designated mailbox or all of the mailbox marked email.
Email account: display existing account, you can start,
edit, or delete the account. Can also create a new
account,
enter
your
email
address,
select
the
communication protocol and data accounts, set up the
server of receive and send the, input your username
and password, set the account name, then the account
creation is completed.
Template text: contains some template sentences.
5.6.7
Cell Broadcast
This service is offered by the network operator.
„
Receive mode: launch or close the receive mode.
„
Read message: read the received cell broadcast.
„
Language: set the language of receiving the cell
broadcast.
64
User's Guide
„
Channel setting: set up the channel of cell
broadcast, performing:
Select, Add, Edit and
Delete.
5.7
Multimedia
5.7.1
Camera
Please insert the F-Flash card before using this
function.
Click Camera with press the left soft key to select it,
enter in the camera window, press OK key or 0 key to
snap. Click Option with press the left soft key to select
it and you can perform: Web Camera, To Album,
Camera Setup, Image Setup, White Balance, Scenic
Mode, Special Effect, Image Frame and Default
Setting.
Note: under the snap window, press 1-9(excepting 3and
5) numerical keys to respectively set up: Special Effect,
White Balance, Delay Timer, Con Snap, Scenic Mode,
Image Quality, Image Size. With the left and right
65
User's Guide
directional keys, you can adjust the focal length; With
# key, you can display or conceal the functional icons
in the snap window.
Note: you cannot focus when snapping by pressing the
OK key.
5.7.2
Image Setting
Set up the size (support
80*60/160*120/320*240/640*480 pixels) and quality
of image.
5.7.3
Recorder
Click Recorder with the touch pencil or press the left
soft key to select it, entering in the recorder window.
Select a record file by pressing the up and down
navigation keys or the up and down left side key, click
Option with the touch pencil or press the left soft key
to select it, performing: Record, Play, Add, Rename,
Delete, Delete All, Setting and Send.
„
Record: record newly.
66
User's Guide
„
Play: play the current record.
„
Add: continue to record by affixing to the current
record. Only file of AMR format can be affixed..
„
Rename: change the name of the record file.
„
Delete: delete the currently-selected record file.
„
Delete all: delete all the record files.
„
Setting: set up the file format and voice quality.
„
Send: selectively send to the profile mode, to
MMS and to Bluetooth.
5.7.4
Video Player
Be sure that the T-Flash card is inserted in before this
function is employed.
Enter in the video player window, select a video file,
Click the Option menu with the touch pencil or press
the left soft key to select it, you can perform for the
image: Play, Send, Rename, Delete, Delete All and
Sorting.
„
Play: play a video file.
67
User's Guide
„
View: view the image.
„
Send: send the video file to the wallpaper, to the
screen protection, to the animations of powering
on/off, to the phonebook, to the MMS and to the
Bluetooth.
„
Rename: change the name of the video file.
„
Delete: delete the selected video file.
„
Delete all: delete all selected video files.
„
Sorting mode: sort the video files by the Name,
Type, Time, Size and None.
„
Arrange.
5.7.5
Sound Effects
Turn on or off sound effects.
Equalizer special effects include: Mega Bass; dance music,
classical music, alt, event, pop music, rock'n'roll.
5.7.6
Digital Video Camera
Please insert the F-Flash card before using this
68
User's Guide
function.
Click Camera with press the left soft key to select it,
enter in the camera window, Click Option with press
the left soft key to select it and you can perform: Web
Camera, To Album, Camera Setup, Video Setup, W
Special Effect and Default Setting.
Note: with the 1-5 (excepting 4) numerical keys, you
can set up the camera and special effect etc; with the
left and right directional keys, you can tune up the
brightness; with the up and down directional keys, you
can focus; and with the 5 key, you can switch the
camera.
„
Select Camera: switch the to the primary or
secondary camera.
„
To player: directly enter in the video player menu.
„
Video camera setting: enter in the video camera
setting window, set up the white balance,
exposure
compensation,
night
shoot
and
flash-free.
„
Video setting: set up the video quality in Low,
Medium and High.
69
User's Guide
„
Special Setting: set up the image in Normal, Gray
Scale, Sepia, Sepia Blue and Negative effects.
„
Default setting: recover to the initial status.
5.7.7
Music Player
Click the Music Player with the touch pencil or Press
the left soft key to select it, enter in the music player
window, and press the left soft to select the Play,
Details, Add to Ringtone Library, Add, Delete, Delete
All and Setting. If the Auto Generating List function is
activated, there will be only menus: Play, Details, Add
to Ringtone Library, Update Play List and Setting.
Under the playing window, you can conduct:
Play/Pause, Stop, Select Music, Switch Music, Volume
Adjustment and Setting.
„
Play: press OK key or click Play key with the
touch pencil
„
Pause: press OK key or click Play key with the
touch pencil
70
User's Guide
„
Stop: press * key or click the Stop key with the
touch pencil during the play
„
Switch Music: press the right and left navigation
keys or click the list with the touch pencil to select
songs, and press the right and left navigation keys
to switch the music in the play window.
„
Volume adjustment: press the volume-adjusted
side key or click the volume icon to increase or
decrease the volume.
5.8
5.8.1
Services
STK Service
This function is provided by the network supplier.
There will be new menu option popping up based on
the different services provided by the different mobile
manufacturers. If the SIM card and network supplier
do not support the service, the function will be not used.
Please
contact
with
the
network
supplier
for
71
User's Guide
information.
5.8.2
WAP
You can use the WAP browser to surf on the network.
Please contact with the network supplier for details.
Press the left soft key to perform as follows:
„
Homepage: indicate the default website of the
internet.
„
Bookmark: used to save the commonly-used
website.
„
Webpage log: browse the saved record of the
browsed WebPages.
„
Saved webpage: select the saved webpage to
access to the network directly.
„
Input website: input your wanted website and
press Finish to directly access to the webpage.
„
Service inbox: save the short message sent from
the website.
„
Setup:
72
User's Guide
¾ Edit setup document: the Mobile GPRS is set
up for the phone in default. If you roam to a
different network or want to set up freshly,
please contact the local network server.
¾ Browse option: set up the waiting time and
displayed image.
¾ Service message setup: set up to open/close the
service message.
¾ Cancel cache: clear away the cache remained
when at access to the network
¾ Cancel personal data: clear away the personal
data related when at registration of the network
and at access to the network.
¾ Instrument of Credit: mainly used in the WTLS
or SSL/TLS to verify whether the WAP
gateway or server identity is secure or not. If
the instrument of credit is obtained, the
pertinent instrument info will display in the
submenu.
73
User's Guide
5.8.3
„
Account Data
GSM Data
Enter in GSM database, select any entry and
press the left soft key for Edition, pop up the following
operations: Name, Number, Subscriber’s Account,
Password, Channel Mode, Velocity and Gateway
„
GPRS
Enter in GSM database, select any entry and
press the left soft key for Edition pop up the following
operations: GPRS connecting point, Subscriber’s
Account, Password and Authentic Mode.
5.8.4
Wireless LAN
The LAN can be accessed from service through
digital account. All accessible network in the LAN can
be searched.
Below are the detailed operation steps:
Step 1: Open WLAN
Step 2: Search network
Step3: Choose the received network address based
on Step 2. Choose connect from options, input the web
access point.
74
User's Guide
Step 4: Configure the user default web address
from WAP. The status of the WLAN is shown in the
default web address.
Step 5: The homepage is connected to access
internet.
5.9
5.9.1
Organizer
E-book
With this function, you can read stories, newspaper and
magazine, realizing the reading function with the
phone. You can read the .txt files.
5.9.2
Calendar
Click the Calendar with press the left soft key to select it,
and enter in the window of the calendar in the present
month to view and perform: To-do List, New Task, Skip to
the Designated Date, View Weekly and Lunar Calendar
75
User's Guide
5.9.3
Alarm Clock
Click the Alarm Clock menu with the touch pencil, or
press the left soft key to select the Alarm Clock, enter
in the alarm clock window. There are 5 alarm clocks in
total, which are closed in default. Select one of the
alarm clocks, click the Edition button with the touch
pencil or press the left soft key to select the Edition
button, performing the related settings.
5.9.4
Universal Time
With this function, you can view the local time of
various countries.
5.10 Setting
5.10.1 Phone Setup
Under the phone setup menu, based on your interests
and operation habits, you can set up the language, time
76
User's Guide
and date. Under the idle window, press the left soft key
to enter in the main menu, and then select the
Setup/Phone Setup in sequence to enter in the phone
setup application window, where you can see the
following options:
„
Time & date: you can set up the city, time/date
and time format for the phone.
„
Timely Powering-on/off: you can set up the Auto
Powering-off or Auto Powering-on.
If the
current function is activated, the phone will
automatically be powered on/off at the set time.
¾ Status: you can select to Open/Close this function.
¾ Power-on/off: you can select to Power the phone
on/off the phone.
¾ Time: set up the time.
„
Language: used to set up the language of the text
displayed on the screen in English or simplified
Chinese.
„
Press input method: select the default input
method for the phone.
77
User's Guide
„
Greetings: edit the greeting phrase upon powering
on and select to activate or deactivate this
function.
„
Designated functional keys: define the shortcut
keys for the up, down, left and right navigation
keys.
„
Auto update time: press the left soft key to open
or close this function.
„
UART Setup: Select SIM.
5.10.2 Display setting
„
Main menu style: used to set up the styles of the
main menu.
„
Wallpaper: select your favorite picture as the
wallpaper of the standby window.
„
Screen protection: select your favorite picture as
the screen protection.
„
Power-on animation: press the up and down
navigation keys to select the power-on animation.
78
User's Guide
„
Power-off animation: press the up and down
navigation keys to select the power-off animation.
„
LCD
backlight:
adjustable
LCD
backlight
brightness and time.
5.10.3 Network Setting
The contents in this section are related to the network
supplier. Please contact with your network supplier when
using this function. If you want to access to a network
which has no roaming protocol with your original home
network, the phone will display that you can dial the
emergency call only.
In the function, you can perform as follows:
„
Network choice: press the up and down navigation
keys to select the ways of connecting with the
network in Auto and Manual modes, and press the
OK button to finish the setup.
„
Preferred network: press OK and then Option
buttons to select the Add from List, Add, Modify
79
User's Guide
Priority Network and Delete.
5.10.4 Security Setting
You can set up your phone security options with this
menu in order to avoid your phone or SIM card against
being used illegally. See also Password for access to
network.
„ Security Setting for SIM
¾
SIM Lock
Press Launch key; upon each powering on, the
PIN lock password is required to input, or
otherwise, you cannot use the SIM card. During
setup, the right PIN is required to input. When the
PIN is input wrongly in successively three times,
the PUK (personal unlock key) is required to input.
The PUK is used to unlock and recharge the
locked PIN, if PUK is not provided or missed,
please contact with your network operator.
¾
Change Password
80
User's Guide
You can set up the PIN and PIN 2 for SIM card 1.
„ Phone lock: after launching the phone lock, when
the phone is to be recovered for default setup, or is
powered on, the right phone password is required to
input. The default phone password is 1122.
„ Keypad lock: press the left soft key to lock the
keypad in menu: Close, 5 Sec, 5Sec, Sec, 1 Min and
5 Min.
5.10.5 Recovery of Default Setting
With this option, you can recover the phone function
into the initial settings when the phone leaves factory.
„ For this function, the right password requires to
input for further operation.
¾ The press password 1122.
5.10.6 Sound Effects
Turn on or off sound effects.
Equalizer special effects include: Mega Bass; dance
81
User's Guide
music, classical music, alt, event, pop music.
5.11 User Profile
Select the required profile mode. The profile modes are:
General Mode, Conference Mode, Outdoor Mode,
Indoor
Mode,
Earphone
Mode,
Bluetooth
and
Energycut Mode, which are set up in default. You can
customize the profile modes. Under the User
Profilewindow, press Option button to enter into the
customizing window. The User Profileis changed as
follows:
„
Ringtone setup: set up the Incoming Call Ton,
Alarm Clock Tone, Tone for Powering Phone
On/off, Message Ringtone and Key Tone.
„
Volume: press the up and down side key and the
up and down navigation keys to tune up the ring
volume and key tone.
„
Ringtone mode: press the up and down side key or
the up and down navigation keys to select the
82
User's Guide
Ringtone, Vibration, Vibration& Ringtone, and
Ringtone after Vibration modes.
„
Intelligent call alert: you can select Open or Off
this function. .
„
Ringtone type: press the up and down side key or
the up and down navigation keys to select from:
Once, Continue and Decrescendo.
„
Prompt tone: press the up and down side key or
the up and down navigation keys in turn too select,
press Select or Cancel to set the Warning Tone,
Error Tone, Network Access Tone and Connection
Tone.
„
Answer mode: press Selection/Cancel to open or
close Answer by Any Key or Auto Reply( only set
up under the earphone mode).
„
Background light setting: set up the LCD
background light Brightness and Time or open or
close the keypad light.
After setup, select Activate button to launch the present
mode.
83
User's Guide
Tip: You are recommended to set up the User Profileas
the conference mode and electricity-saving mode in the
comparatively quiet public occasion.
5.12 Bluetooth
You can activate the Bluetooth function in the menu by
click it with the touch pencil or press the left soft key
to enter in it, there are items, including the Activate
Bluetooth, Search Hand-free Device, My Device,
Device at Connecting, Setup and My Bluetooth
categories.
„
Activate Bluetooth: activate or close the Bluetooth
function.
„
Search hand-free device: search and select the
Bluetooth device externally connected.
„
My device: search and select the Bluetooth device
externally connected with the phone.
„
Device at connecting: view the Bluetooth device
at connecting.
84
User's Guide
„
Setting: set up Searchable, Local Device Name,
Authentic certificate, Sound Path and File
Delivery.
„
My Bluetooth: including Device Name, Bluetooth
Device Address and Support Service.
FAQ and Troubleshooting Solution
Before contacting with the post sales server, you can
check the phone simply, or you can avoid the excessive
maintenance time and expense waste.
FAQ
Cause and Troubleshooting method
Cannot power „ Check whether the Powering-on key is
the phone on
pressed and hold for 1 second or above;
„ Check whether the battery is contacted
badly or not. Please remove the battery
firstly and then try to power the phone
on;
„ Check whether the battery capacity is
85
User's Guide
used up or not; please charge the
battery;
Cannot access „ The signal is weak, please move to the
to
the
network
place where the signal is strong and
retry;
„ Beyond the coverage of the network of
the network server;
„ SIM card is invalid, please contact with
your network supplier;
When
phone
powered
the „ Check whether the SIM card is
is
installed rightly( see page 11);
on, „ The phone is locked with the Auto
the
Lock
function
activated
information is
password shall be input;
and
the
not displayed „ Input PIN; select the function of
inputting PIN when the phone is
powered on. The PIN shall be input
(the PIN attached with the SIM card
86
User's Guide
should be input for the first use.);
„ Input PUK: after the PIN is input
wrongly for successively 3 times, the
phone will be locked. The PUK
provided by the network operator
should be input;
Bad
Call „ Check whether the volume is adjusted
Quality
appropriately;
„ Use the phone at the place where the
receiving quality is not good, such as
near to the building or in the basement
where the radio wave cannot reach.
„ Use the phone at the peak time, such as
at the time of going on/off the duty, the
channel is congested;
Shortened
stand-by time
„ The stand-by time is relevant to the
system setup. The phone is possibly at
the place where the signal state is bad.
When the phone cannot receive the
87
User's Guide
signal, the phone will transmit to
search the base station continuously;
consuming a great deal of battery
capacity and shortening the stand-by
time of the battery. Please move to the
place where the signal is strong to use
the phone or temporarily power the
phone off.
„ The battery requires to be displaced
with a new battery ;
SIM
card „ There is some dirt o the metal surface
error
of the SIM card. Please wipe the metal
contacts of the SIM card with a clean
cloth ;
„ SIM card is not installed ;
„ SIM card is damaged. Please contact
with your network supplier;
„
Cannot dial „ Please confirm whether the dial key is
88
User's Guide
out
pressed after the number is dialed;
„ Please confirm whether the call is
barred due to owned toll;
„ Please confirm whether the SIM card is
valid or not;
„
Please confirm whether the call
restriction function is set up;
„ Please confirm whether the fixed dial
function is set up;
„
The
caller „ Please confirm that the phone is
cannot link up
powered on and is uplinked with
with you
network;
„ Please confirm that the call is barred
because of owned toll;
„ Please confirm the ingoing call is
barred due to owned toll;
„ Please confirm whether the SIM card is
valid;
89
User's Guide
„ Please confirm whether the fixed dial
function is set up;
Cannot
„ Bad contact; please check whether the
charge
plug is connected well;
„ Charge at the environment below -10℃
or beyond 55℃. Please change the
charging environment;
„
The battery or adapter is damaged and
requires to be replaced;
„
Cannot set up „ Error operation;
some
functions
„ The network supplier does not support
these functions, or you have not
applied for these functions.
If the aforementioned instructions cannot facilitate
you to conquer these problems, please record:
„ Phone model and SN
„ Detailed contents in the guarantee-to-repair sheet
90
User's Guide
„ Clear statement of the problem
And then contact with the post sales service
department or the local distributor.
91
User's Guide
7.1
Reference Information
Access Password
The phone is set as 1122 in default for the access
password.
7.2
Health&Safety Information
Please carefully read and abide by the brief instruction
as follows in order to prevent against the dangers or
violation of the laws.
◆ Please power your phone off at the chemical
plants, gas stations and other places near to the
exploders.
◆
Keep the phone beyond the stretch of the kids.
◆ When driving, please use the hand-free device
( otherwise purchased) in order to secure the safety, or
otherwise please part your vehicle along the roadside
for call unless the emergent cases.
92
User's Guide
◆ Strictly prohibit using phone onboard the plane
and please power your phone off before stepping on the
place.
◆ Should power your phone off in the hospitals or at
the place where the phone is not allowed to use. The
phone can disturb the electronic equipment and
medical treatment apparatus, such as the heart
pacemaker, hearing aids and other medical electronic
devices.
◆
The
accessories and fittings of non-original
factory are not qualified for guaranteeing to repair.
◆
The subscriber cannot disassemble the phone at
his/her discretion. Please contact with the supplier
when the phone fails.
◆ Prohibit connecting the phone with the adapter
while the battery is not installed.
◆ Should charge the battery under the ventilating and
good-radiating environment far away the flammable
and exploding articles.
◆Please keep the phone far away from magnetic
93
User's Guide
substances, such as CD and credit card in order prevent
the phone from degauss.
◆Be sure that the phone is not contacted with any
liquid, places dissemble the battery and contact with
the supplier once the phone is contacted with the
liquid.
◆Avoid using the phone under the over-high or
over-low temperature, exposing the phone under the
violent sunlight or at the environment of high humidity.
◆Do not clean the phone with the wet cloth of any
liquid or detergents.
The build-in antenna (on the top of the phone, near to
the video-shooting head) of the phone should not be
touched if not necessary when the phone is powered on
in order to prevent the communication effect from be
affected.
◆The phone is provided with the snapping, shooting
and recording functions. Please abide by the related
regulations and laws to use these functions. Making
bold to snap, shoot or record may be under the
94
User's Guide
violation of the laws or regulations.
◆ Our company will undertake no any responsibilities
for any loss rising from the deleted, failed record,
damaged or lose photos and videos due to the fittings
or software when the snapping, video-shooting and
record functions of the phone is employed.
◆ The recorded photos, videos and records derived by
improperly using the snapping, shooting and recording
function may infringe upon the right of the copyright
owner.
◆ Our company will not undertake any responsibilities
for the abnormal subscriber of the phone if the
subscriber downloads the virus file when the network
function is employed.
◆ Prohibit loading the image and ringtone files that
the data is destroyed. Our company will undertake no
responsibilities for the abnormal operation of the phone
rising from balefully loading such files.
◆Our company will undertake no any indemnifying
responsibilities
for
the
risks
rising
from
the
95
User's Guide
employment of the non-original battery or adapter.
Description: This subscriber’s manual is based on
the simplified Chinese operating mode and will be
slightly distinguished from that of English operating
mode.
Warning: The original factories will undertake no
any responsibilities for not abiding by the foregoing
recommendation or improperly using the phone.
Note: Do not discard the waste battery in the trash
bin but send to the designated locations or return to
our company.
7.3
GSM
Explanation of Terms
Global
System
for
Mobile
Communications
GPRS
General Packet Radio Service
SMS
Message Service
96
User's Guide
SMS-CB
Broadcasting Message
WAP
Wireless Application Protocol
FDN
Fixed Dialing Number
SIM
Subscriber Identity Module
PC
Personal Computer
PIN
Personal
Identification
Number,
generally referring to PIN1 supplied long with the SIM
card and serving as a password to launch SIM card.
PIN2
Personal Identification Number 2 provided
by the network operator and used when the SIM-based
protective function of FDN (fixed dialing number) is
required.
PUK
Personal Unlock Key provided along
with the SIM card. When the PIN is
input wrongly for successively 3 times,
the SIM card will be locked and should
be unlocked with the PUK.
PUK2
Personal Unlock Key 2 provided along
with the special SIM card and used to modify or lock
PIN 2.
97
User's Guide
IMEI
International Mobile Equipment Identity
composed of 15 digits. One phone is corresponding to
an IMEI.
98
RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this standard
during product certification for use next to the body is 0.44 W/kg, next to the head is
0.87 W/kg. This transmitter must not be collocated or operating in conjunction with any
other antenna or transmitter.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2010:10:29 10:26:41+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:11:18 14:09:48+08:00
Metadata Date                   : 2010:11:18 14:09:48+08:00
Format                          : application/pdf
Creator                         : eason
Title                           : Microsoft Word - S100 User's Guide_100906
Document ID                     : uuid:34772095-683d-4c62-bfbd-0861e0246d5a
Instance ID                     : uuid:a4ee779f-939b-42a3-acb5-703cf2363210
Has XFA                         : No
Page Count                      : 99
Author                          : eason
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YZR-S100

Navigation menu