E TECH IM101 Private Land Mobile Radio for Vehicle (VHF) User Manual IM100 RF exposure information

E-TECH Co., Ltd. Private Land Mobile Radio for Vehicle (VHF) IM100 RF exposure information

Contents

Users Manual I

E-Tech Co., Ltd. Installation requirements for compliance with Radio Frequency(RF) energy Exposure Safety Standards. [ Warning ] Your FM radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only.” In addition, your FM radio complies with the following standards and guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans : • FCC OET Bulletin 65 Edition 97-01 supplement C, Evaluating compliance with FCC guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. • American National Standards Institute (C95.1-1992), IEEE standard for Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHz to 300 GHz. • American National Standards Institute (C95.3-1992), IEEE recommended practice for the measurement of potentially hazardous electromagnetic fields – RF and Microwave. • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. • ALWAYS use E-TECH authorized accessories (antennas, batteries, speaker/mics, etc). Use of unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded. • DO NOT transmit for more than 50% of total radio use time (50% duty cycle). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX Indicator” lights red.
E-Tech Co., Ltd. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates within the FCC RF exposure limits. [ Important ] Be sure that antenna installation is per chapter 5 of user’s manual. Electromagnetic Interference / Compatibility During transmissions, your Radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Navigation menu