E TECH IS100 FM Handheld Transceiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	613854
Application ID	3rPLYDdZ8R4a0+W0k1H32g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.25kB (328163 bits)
Date Submitted	2005-12-21 00:00:00
Date Available	2005-12-21 00:00:00
Creation Date	2005-11-29 15:46:55
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-12-14 14:12:48
Document Title	Users Manual

E-TECH Co., Ltd
1/16
▶ Table of Contents◀
1.
Introduction
2.
Description of Unit
3.
Technical Specifications
4.
Theory of Operation
5.
Circuit Descriptions
6.
Parts List
7. Block Diagram
8. CONTROL Layout (Upper Side)
9.
CONTROL
Layout (Bottom Side)
10. RF
Layout (Upper Side)
11. RF
Layout (Bottom Side)
12. Circuit
FILE: IS 100 service manual.doc
Diagram
2005.11.29
E-TECH Co., Ltd
2/16
1. Introduction
IS100 has a compact size with a various features in the range of 136~174MHz. IS100
Has a various features shown as below.
IS100 constructed with a microprocessor controlled, temperature compensated Phase Locked
Loop(PLL) frequency synthesizer.
The radio features a double conversion receiver and a direct FM
transmitter modulator. A special integrated circuit provides support to sub-audible signaling(CTCSS & DCS)
and most of the receiving parts are switched off periodically in the power save mode to reduce battery current
drain during standby.
2. Description of Unit
Items
Model
Radio
IS100
Antenna
IA-156
1700mAh Li-Ion battery pack
BL 1700
Desktop rapid charter
IC-170
Supplied
Package
Adaptor
User manual
Accessories
Items
Model
External / Speaker Microphone
ES-1
Earpiece Microphone
EP-1
Earpiece VOX Microphone
EV-1
VOX & PTT Headset
VP-1
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
3/16
3. Technical Specifications
3-1 General
1) Frequency range
136~174 MHz
2) Channels
255 Channels
3) Channel spacing
12.5 kHz/25 kHz
4) Communication method
Simplex
5) Antenna Impedance
50 ohm
6)
Helical Antenna
Antenna
7) Power supply voltage
8) Current Drain
LI-1700mAh Li-Ion battery pack(Voltage: 7.4V DC)
When Transmitting(5W)
When Receiving(0.5W)
Transmit standby
Receiver standby(PSC MODE) 9) Microphone
< 2A
< 300mA
< 60mA
< 50mA
Internal Condenser Microphone(External Speaker Micro
phone is available)
10) Operating temperature range:
11)
Size
12) Weight
-30℃ ～ +60℃
56(W)x100(H)x34(D)
285g
3-2 Transmitter
1)
Power Output
HIGH – 5W, LOW - 1W
2)
Modulation
8K5OF3E/16KOF3E
3) Oscillator method
PLL
4) Frequency Stability
less than ±0.00025% (±2.5PPM)
5) Maximum frequency deviation: ±2.5 kHz(Narrow)/ ±5 kHz(Wide)
6) Audio Distortion
less than 5% (1 kHz 60%)
7)
SPURIOUS Emission
-65 [dBc]
8)
FM Hum & Noise
-40 [dB] (HP8920A 300Hz ～ 3kHz BPF)
9)
BAND
38 [MHz]
SPREAD
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
4/16
3-3 Receiver
1) Receiver Type
Double Super Hetero type
2) Sensitivity
-0.25uV 이하(12dB SINAD 시)
3) Frequency Stability
±0.00025%(±2.5PPM)
4)
SPURIOUS
Rejection
5) Adjacent Channel Selectivity:
-60 dB
-60 dB (Narrow) , -70 dB (Wide)
6) Distortion
5% (1 kHz 60%)
7) Hum & Noise
-40 dB(HP8920A 300Hz ～ 3kHz BPF)
8) Audio output
1000 mW
9) BAND SPREAD
38MHz
10) Speaker size
45 pi
4. Theory of Operation
EXTERNAL VIEW
13)Emergency key
2)LCD
3) PTT
8)Power ON/OFF
& Volume control
Button
9)Ear/Mic JACK
4) TX POWER
HIGH/LOW
10) Menu Button
5)Monitor Button
11)Mic
12)SPEAKER
7)DOWN Button
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
5/16
4-1 Features & Operation
1. Monitor
Press the Monitor key momentarily to disable the Tone squelch.
2. Radio Call
By using Various 5Tone, individual / Group call is available.
16 Receiving codes are available as well as open call.
3. Missed calls list
16 Missed calls can be listed. If a call remains unanswered, the call will be stored
by the radio.
4. contact list
During a call, the contact list may be used to give access to up to 16 preprogrammed
numbers accessed via the menu.
5. status list
A status is a code for transmitting prearranged messages, e.g. status “05” may indicate
“launch”. Status list contains up to 30 entries.
6. Channel : 255 channel
7. Scan ON/off
8. Power level : Power level is adjustable in each channel respectively.
9. Talkaround on/off
10. Emergency :
11. Lone Worker
12. Tx Tone select : In the menu, tx dcs /ctcss tone is adjustable.
13. Rx Tone select : In the menu, rx dcs /ctcss tone is adjustable.
14. Group : Defines group tone. You can select tone code for group, and it is used as a default value
. 0~9 and a, b, c, d available. And “A” is used as a basic value..
15. BEEP ON/OFF : BEEP sound ON/OFF.
16. KEY LOCK : LOCK/UNLOCK Button KEY.
17. SQUELCH : Squelch level is adjustable
18. AUTO SQUELCH : Squelch level is adjustable automatically by surroundings.
19. DTMF ON/OFF : DTMF function is available.
20. VOX : VOX LEVEL is adjustable by pushing up and down button.
21. AUTO VOX : VOX level is adjustable automatically by surroundings.
22. P - SCAN : Priority Scan
23. POWER SAVE : Power save mode is available.
24. PASS WORD : This function is useful for security reason.
25. LOCATION INDICATE : Indicate where the radio is located by blinking green light every 7 seconds.
26. SCRMABLE : Internal Voice Scrambler is available.
27. STUN / UNSTUN : For added security and to avoid abuse of the radio system in which you operate
a feature known as Stun/Unstun is included in your radio.
28. BACKLIGHT : Lamp is lighting when you check LCD status.
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
6/16
4-2 LCD Display and Icons
1.ANT GAZE ; Shows the received signal strength.
2.TX POWER HIGH: Indicate power level
3.KEY LOCK: Appears during key lock function is ON.
4.ALART(BEEP) ON/OFF: Appears when beep sound is turned ON.
5.Battery level indicator: Indicates reaming battery power.
6.VOX ON/OFF: Appears when VOX function is turned On.
7.SCAN: Appears when Scan function is activated.
8.SCRAMBLE: Appears while the voice scrambler function is activated.
9.TALK AROUND Indicator.
4-3 Features
1. Channel
This radio offers up to 255 channels
1). By using
button,
you can select the desired channel.
2. Missed calls list
Up to 16 calls can be stored.
If the same radio calls more than once, only the most recent call is stored.
When fifteen calls have been stored by the radio, depending on the radio programming the sixteenth call
received may overwrite the first or not be stored by the radio.
1).
to enter Menu Mode.
2) Display shows
3)
to select
4)
or
5)
to exit
to scroll list
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
7/16
3. Contact list
1).
to enter Menu Mode.
2)
or
3)
to until
to select
4)
or
5)
to exit
to scroll list
4. Status call list
4-1. Making STATUS call
1)
to enter Menu Mode.
2)
or
3)
4)
to until
to select
or
to scroll list
5) Push PTT KEY for sending message on the LCD.
4-2 Make STATUS Message
1)
to enter Menu Mode.
2)
or
3)
to until
to select
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
4)
or
5)
8/16
to scroll list
to SELECT
5. Lone work
1).
to enter Menu Mode.
2)
or
3)
to until
to select
4)
or
to
select
ON/OFF
6. Tx power
1).
to enter Menu Mode.
2)
or
3)
to select
4)
5)
to until
or
to
select HIGH / LOW POWER
to select
7. Tx Tone
Selecting Transmitting TONE(CTCSS/DCS).
1).
to enter Menu Mode.
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
2)
or
3)
9/16
to until
to select
4)
or
to Select TONE을 either CTCSS or DCS.
0= NON TONE
1-38 CTCSS
101 – 183 DCS TONE
5)
to select exit
8. Rx Tone
Changing Receiving TONE(CTCSS/DCS).
1).
to enter Menu Mode.
2)
or
3)
4)
to until
to select
or
to select TONE either CTCSS or DCS.
0= NON TONE
1-38 CTCSS
101 – 183 DCS TONE.
5)
to select exit
9. Group
Changing GROUP Tone.
1).
to enter Menu Mode.
2)
or
to until
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
3)
10/16
to select
or
4)
5)
to select scroll list
to select exit
10. Beep on/off
1).
to enter Menu Mode.
2)
or
3)
to until
to select
4)
or
5)
to select on off .
to select
11. Key lock
1).
to enter Menu Mode.
2)
or
3)
to until
to select
4)
or
5)
to
select key lock /unlock.
to select
12. Squelch level
16 level is available. 0 = terminate sq function
1).
to enter Menu Mode.
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
2)
3)
4)
5)
or
11/16
to until
to select
or
to the scroll list
to select exit
13. Auto Squelch
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to
select on /off .
to select
14. Scan
1).
to enter Menu Mode.
2)
or
3)
to until
to scan.
4) Push PTT for exit
15. DTMF
1).
to enter Menu Mode.
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
2)
or
12/16
to until
to select
3)
4)
or
5)
to
select ON /OFF.
to select
16. Vox on/off
1).
to enter Menu Mode.
2)
or
3)
to until
to select
4)
or
5)
to
select ON /OFF.
to select
17. Vox Level
16 level is available..
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to select
to scroll list
for exit
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
13/16
18. Auto Vox
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to
select ON /OFF.
to select
19. Priority Scan
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to
select ON /OFF.
to select
20. Priority scan CH
1).
to enter Menu Mode.
2)
or
3)
4)
to until
to select
or
to scroll list
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
5)
14/16
to select for exit
21. Power save
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to
select ON /OFF.
to select
22. Talkaround
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to
select ON /OFF.
to select
23. Password
1).
to enter Menu Mode.
2)
or
to until
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
3)
to select
4)
5)
15/16
or
to
select ON /OFF.
to select
24. Password CH
1).
to enter Menu Mode.
2)
or
3)
to until
to select
4) ---- will display on the LCD( enter old password)
or
by pushing up and down KEY to change password.
by pushing enter KEY to change digit of password.
5) Enter new password by 4 digit.
25. Location
Indicate where the radio is located by blinking green light every 7 seconds.
1).
to enter Menu Mode.
2)
or
3)
4)
to until
to select
or
to
select ON /OFF.
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
5)
16/16
to select
26. Scramble
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to
select ON /OFF.
to select
27. Status call Send
1).
to enter Menu Mode.
2)
or
3)
4)
5)
to until
to select
or
to
select ON /OFF.
to select
5. Circuit Description.
5-1 Transmitter
1) MIC AMP Circuit
Voice signal from the microphone are applied to microphone amplifier U303. U303 contains a
low-pass filter that has a 6dB/oct response between 300Hz and 3kHz and eliminate above
3kHz. The pre-emphasized audio signal is applied to VR302 to adjust maximum frequency
deviation.
FILE: IS 100 Service manual.doc
2005.11.29
E-TECH Co., Ltd
17/16
2) VCO circuit
The transmit frequency is directly generated by the Colpitts oscillation circuit contains Q402,Q403.
3) POWER AMP
Signals from Q202, Q206 is supplied through antenna switch Q203,Q204 to a low-pass filter made up
and then applied to Antenna Jack.
5-2 Receiver
1) LOWPASS FILTER and Antenna switching circuit.
Signals from antenna connector fed to the antenna switching circuit through the low pass filter
consisting of L212~214. In receiving mode, D204, D202 is turned off, isolates the antenna from the
transmitter circuit and matching circuitry, so that the incoming signals are fed to the RF amplifier
through L211.
2) RF AMP Circuit
The signals from the switching circuit are fed to the RF amplifier Q101 through a band pass filter made
up of molded coil, vvc diode and capacitor.
3) MIXER Circuit
The amplified signals are fed to Gate 1 of the first mixer Q102. First local oscillator signal is supplied
to Gate 2 of Q102 from the PLL circuit to convert the RF signals into 21.4MHz first IF signal.
4) IF Circuit
The first signals from Q102 are fed to the matched pair crystal filter FL101, then IF signals are amplified
in Q103. And those signals are fed to U101 which is composed of the second local oscillator, second
local oscillator, second mixer, limiter amplifier, quadrature detector and active filter circuit. The second
local oscillator at 20.945MHz with X 101 and is fed to the second mixer with the first IF signals to
convert into 455kHz second IF signals.
5) Audio and squelch Circuit
The detected audio signals are put through a 6dB/oct de-emphasis circuit made up of Q602.
The signal is then applied to audio power amplifier U603 to obtain enough power to driver the speaker.
Part of the recovered noise signal is fed to the integrated operational amplifier inside U101 which
makes up an low pass filter.
The sensitivity of squelch is adjusted by VR 101.
5-3 VCO Circuit
The transmit / receive frequency is directly generated by the Colpitts oscillation circuit contains Q402,
Q405
FILE: IS 100 Service manual.doc
2005.11.29

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:11:29 15:46:55+09:00
Modify Date                     : 2005:12:14 14:12:48+09:00
Page Count                      : 17
Creation Date                   : 2005:11:29 06:46:55Z
Mod Date                        : 2005:11:29 06:46:55Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2005:11:29 06:46:55Z

EXIF Metadata provided by EXIF.tools