E matic X9 X9 User Manual

EMATIC LIMITED X9

Contents

User manual

Download: E matic X9 X9 User Manual
Mirror Download [FCC.gov]E matic X9 X9 User Manual
Document ID3198351
Application IDMEW3wcozKeLTU80fc98PrA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize44.48kB (555973 bits)
Date Submitted2016-11-17 00:00:00
Date Available2016-11-17 00:00:00
Creation Date2016-11-10 03:46:46
Producing SoftwareMicrosoft? Office Word 2007
Document Lastmod2016-11-10 03:46:46
Document TitleUser manual
Document CreatorMicrosoft? Office Word 2007
Document Author: Administrator

User manual
Model: X9
Brand: EXTREM
Started to use your phone:
Power on: Press and hold the power key button for 3 seconds
Power off: Press and hold the power key button for 3
seconds, select ‘switch off’ in the menu option.
picture:
1) PTT: only can be used on software push to /Camera Button
2) Magnetic Charging 9) Back key
3) Reset key 10) Micro USB port
4) Front camera 11) Volume Up
5)Earpiece 12) Volume Down
6) Light Sensor 13) Power on/off
7) Menu key 14) Rear Camera
8) Home key 15) Flash
16) Speaker
Menu Key: Select to show the available menu in current screen.
Home Key: Return to home screen. To view recent application,
press and hold the home key.
Back Key: Return to previous screen
Volume Key: Adjust the volume of ringtone.
Reset Key: Restart the phone.
Insert the SIM Card and T-Flash card:
1. Remove the battery cover: Loosen the screws on the back
side – to rotate both the screws anti-clockwise until open the bake cover as shown in IMAGE 1
2. battery: It's fixed and non-removable battery inside.
3. Put the SIM Card in the SIM holder:
Put the SIM cards into the slot touching the SIM contacts of the phone as shown in IMAGE-3:
Note: When inserting the SIM card, ensure that the golden contacts faces right position.
4. Insert T-Flash card: insert T-Flash card into the slot as shown in iMAGE4.
5.Insert the battery cover: Insert the back cover and rotate two screws clockwise to lock the back
cover.
ATTN: Please power off the phone before plug in or pull out the SIM card and T-Flash card.
Charging the battery:
Before charging the battery, ensure that it has been
properly inserted into the phone as image shown.
T-Flash card:
Please setup T-flash card before using your phone, otherwise the applications cannot be installed
and some functions are not available, for example, camera, recorder, etc.
1. Use the T-Flash card in the phone as USB storage.
Connect the phone with computer by using USB cable. The computer will pop up the windows to
let you install the phone USB driver.
If you only wish to use the T-Flash card in the phone as a USB storage, you can ignore those
windows and click Cancel always. Slide Message Board as shown in the screen below.
And then click USB connected->Turn on USB storage to use the T-Flash as USB storage.
You must setup the phone USB driver in your computer if you wish to use the PC Suite to
synchronize phonebook, Message, Calender and others with your computer. The phone USB
driver can be downloaded from SD-card.
2. Remove the T-Flash card safely Please enter Settings -> SD card & phone storage -> Unmount
SD card to remove the T-Flash card safely.
U sing of touch screen: Single Click:
To select an icon. For example, click dial to open the keypad which will be displayed on the
screen.
Double Click:
To zoom-in or zoom-out. For example, to zoom-in or out of a photo, click twice when viewing a
photo or browsing on the internet.
Hold:
Click and hold the screen、icon or input box to get more o peration options.
1) When clicking on a contact from the contact list for a long time, an operation menu will appear
according to the contact list.
2) To rearrange/move an icon to the home screen, click and h old an icon within the menu list.
3)Long-Time Click the blanks of home screen to add h ome screen shortcut. Drag the screen: You
can drag the screen to view more applications which is not be displayed in one screen.
Home screen:
You can use all the functions by touch screen. Click the icons to open the applications. Check all
the applications so it is functioning properly. In total, there are 5 home screens in the phone,
when you slide to the left or to the right this will move the screen from one to another. To create
shortcuts and widgets, tap and hold at blank area on any of the screens. You can return to the
home screen by pressing the Home key in any screen you are on.
Create shortcuts and widgets:
Press and hold the APPS, and drag on the desk. Select create shortcuts or widgets.
Delete the shortcuts and widgets
To delete an object, tap and hold the object, then drag it towards the bottom of the screen .
When the object turns red let go of it and the selected object will be deleted.
Lock the screen
Lock the phone in order to avoid useless operation and to save the battery by press the power
key. The phone will automatically lock when it is not being used for some time. Unlock the phone
Press either the power key, menu key, home screen key or back key to enter the unlock
interface ,and then slide any direction to unlock.
Message board
Slide Message board bar in any screen to open message board where you are able to check for
unread notifications
Manage applications
Install applications: You can install .apk application among File Manager and set it up step by
step Uninstall application: Enter Settings->Applications->Manage applications, then will be able
manage and remove installed applications.
Recently used applications
Press and hold the home key, the screen will display a window which shows your recently used
applications. Click the icon to open the application.
Extend the battery life:
Some functions may use up more power, which eventually shorten the battery life.
You could: Close all the wireless connection when not in use i.e. BT, Wi-Fi or GPS
Reduce the brightness and shorten the screen timeout to save battery, or press power key to shut
down the screen when the phone is not in use. Close any automatically synchronized applications
such as Email, calendar, contacts and other. Some applications which are downloaded could also
shorten the battery life.
Note:This product is designed as shockproof phone, however, please don’t hit the phone
intentionally. The brutal manipulation may bring damages to the performance of your phone,
and it will be no longer under warranty.
Locked the back cover after put the T-flash card and SIM cards. PPT button can be supported
the digital two ways radio which provided by third platform, but this phone can't support
analog walkie-talkie.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device
does not cause harmful interference.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This X9 meets the government's requirements for exposure to radio waves. The guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin designed to assure the
safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: X9 (FCC ID:
2AJ9Z-X9) has also been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is 0.364W/kg and when properly worn on the body
is 1.270W/kg. This device was tested for typical body-worn operations with the back of the handset kept
10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 10mm separation distance between the user's body and the back of the handset. The use of
belt clips, holsters and similar accessories should not contain metallic components in its assembly. The
use of accessories that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a
minimum separation distance of 10mm must be maintained between the user’s body and the handset,
including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should
not contain any metallic components. Body-worn accessories that do not meet these requirements may
not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved
antenna.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Administrator
Creator                         : Microsoft? Office Word 2007
Create Date                     : 2016:11:10 03:46:46
Modify Date                     : 2016:11:10 03:46:46
Producer                        : Microsoft? Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AJ9Z-X9

Navigation menu