| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2237046 |
| Application ID | 86IALEnqmdmOw1rbjl6Flw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 192.01kB (2400065 bits) |
| Date Submitted | 2014-04-09 00:00:00 |
| Date Available | 2014-04-09 00:00:00 |
| Creation Date | 2013-12-24 16:20:44 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2014-04-03 10:12:27 |
| Document Title | 632 IM-OK-排版.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | j |
INSTRUCTION MANUAL MODEL ET-632
Digital Cooking Thermometer
Introduction
Congratulations on your purchase of the ET-632 Digital Cooking Thermometer, a
programmable radio frequency food thermometer. You will now be able to remotely
monitor the temperature of grilling food and the temperature inside your grill from anywhere
in your home.
Components
1. 1â Receiver unit
2. 1â Transmitter unit
3. 1â Detachable stainless steel FOOD probe
4. 1â Detachable stainless steel BARBECUE probe with clip
5. 4â AAA batteries.
Receiver Features
IRUVHFRQGVWRUHJLVWHUWKHUDGLRIUHTXHQF\ZLWKWKHUHFHLYHU3UHVVWRVHOHFWWKH
WHPSHUDWXUHXQLWEHWZHHQÂ&DQGÂ)
2. PowerâON/OFFââ 3UHVVDQGKROGIRUVHFRQGVWRWXUQV212))WKHWUDQVPLtter.
Installing batteries
Open the battery compartment of the receiver and insert two âAAAâ batteries with correct
polarity. Open the battery compartment of the by removing the two small screws and insert
two âAAAâ batteries with correct polarity.
Registering Receiver & Transmitter
7KH%DUEHFXH7KHUPRPHWHUQHHGVWKHUHFHLYHUWRUHJLVWHUDQGORFNLQWKHUDGLRIUHTXHQF\
signal from the transmitter when batteries are installed3URFHHGDVIROORZVWRUHJLVWHU
3OXJWKHVWDLQOHVVVWHHOSUREHVHQVRUVLQWRWKe corresponding plug in of the transmitter.
Note: The FOOD probe is 6 inches long with pointed end while the BARBECUE probe
is 3 inches long with a grill rack clip.
2. Turn on the receiver by pressing the power button 2 seconds.
3. Turn on the transmitter E\SUHVVLQJWKHSRZHUEXWWRQVHFRQGVIRXQGRQWKHEDFNRIWKH
transmitter. This needs to be done within 120 seconds of turning on the receiver in order for
the receiver to receive the Registration Code from the transmitter. If it doesnât beep within
5-10 seconds and the â---´VKRZQRQ/&'ZDVIODVKLQJRULVVROLGSUHVVWKHSRZHUEXWWRQ
VHFRQGVWRWXUQ2))WKH7UDQVPLWWHUDQGWKHQWXUQEDFN213UHVVLQJDQGKROGLQJWKH
5(6<1& button for 2 seconds will get the same result as turning the transmitter OFF and
WKHQ21
4. Registration is completed when the unit beeps and the probe temperatures will appear
on /&'
Loss link alert
Ć/&' /LTXLG&U\VWDO'LVSOD\ â Displays all icons, temperature and time.
Ć%$77(5<&203$570(17â Holds 2 AAA batteries.
Ć67$1'â 6ZLQJVRXWDQGDOORZ\RXWRVWDQGWKHUHFHLYHURQWDEOHWRS
Buttons
1. HI/HR â ,Q7+(5020(7(50ODE, press and hold until the digits flash; press to
increase the PD[LPXP%$5%(&8(WHPSHUDWXUH3UHVVDQGKROGIRUVHFRQGVWRLQFUHDVH
10 degrees per VHFRQG,Q7,0(502'(ZKHQWKH7,0(5LVVWRSSHGSUHVVWRVHWWKH
KRXU3UHVVDQGKROGIRU seconds to increase 10 hours per second.
2. LO/MIN â ,Q7+(5020(7(502'(SUHVVDQGKROGXQWLOWKHGLJLWVIODVKSUHVVWR
increase the PLQLPXP%$5%(&8(WHPSHUDWXUH3UHVVDQGKROGIRUVHFRQGVWRLQFUHDVH
10 degrees per second. ,Q7,0(502'(ZKHQWKH7,0(5LVVWRSped, press to set the
PLQXWH3UHVVDQGKROGIRUVHFRQGV to increase 10 minutes per second.
3. LIGHT/MODE â 3UHVVWRWXUQRQWKH/&'EDFNOLJKWIRUVHFRQGV3UHVVDQGKROGIRU
VHFRQGVWRVHOHFW7+(5020(7(502'(RU7,0(502'(
4. HI/CLEAR â ,Q7+(5020(7(502'(SUHVVDQGKROGXQWLOWKHGLJLWVIODVKSUHVVWR
increase the PD[LPXP)22'WHPSHUDWXUH3UHVVDQGKROGIRUVHFRQGVWRLQFUHDVH
degrees per second. In 7,0(502'(ZKHQWKHWLPHULVVWRSSHGSUHVVWRFOHDUWKHWLPHU
VHWWLQJEDFNWR
5. ALERT, ÂşC /ÂşF, START/STOP â3UHVVDQGKROGIRUVHFRQGVWRVZLWFKEHWZHHQÂ&DQG
Â)GLVSOD\,Q7+(5020(7(502'(SUHVVWRWXUQ212))WKHDODUP,Q7,0(502'(
press to start or stop the timer countdown or count up.
6. Power â 3UHVVWRWXUQ212))WKHUHFHLver.
Transmitter Features
Ć/&' /LTXLG&U\VWDO'LVSOD\ â displays temperature of both FOOD and BARBECUE. It
will
automatically switch between FOOD and BARBECUE displays.
(Note: Press the re-sync button to switch the display between ÂşC and ÂşF.)
Ć:,5(67$1'â Allows you to stand the receiver on tabletop or it can be reversed and
used as a hanger.
Ć%$77(5<&203$570(17â holds 2 AAA batteries.
Ć)22'â 3OXJ-in for stainless steel FOOD probe.
Ć%$5%(&8(â3OXJ-in for stainless steel BARBECUE probe
Buttons
1. Re-sync âTransmit manualO\WHUPLQDWHVWKHDXWRUHJLVWUDWLRQSURFHVV3UHVVDQGKROG
,IWKHUHFHLYHULVWDNHQRXWRIUDQJHRUWKHUHLVDEQRUPDOH[WHUQDOLQWHUIHUHQFHRUDIWHU
shutting OFF the transmitter, the receiver may not be able to receive the transmission from
the transmitter. If this happens over 4 minutes, the unit will alert you by beeping once for
every 4 seconds to tell you to re-V\QFWKHVLJQDO3UHVVLQJDQ\EXWWRQRQ5HFHLYHUZLOOVWRS
WKH/RVV/LQNEHHS
7RUHJDLQWUDQVPLVVLRQVLJQDOPRYHWKHUHFHLYHUFORVHWRWKHWUDQVPLWWHUWKHOLQNVKRXOGEH
automatically restored and the temperatures should appear on the receiver display.
THERMOMETER MODE
,QWKHUPRPHWHUPRGHWKH/&'ZLOOVKRZD)22'LFRQLQWKHupper part of the display and
a BARBECUE icon in the lower part of the display. You can follow processes below to gain
your desired settings.
Setting HI (Maximum) FOOD Temperature
3UHVVWKH+,&/($5EXWWRQWRGLVSOD\WKHPD[LPXP)22'WHPSHUDWXUHZKLFK will only
be displayed IRUVHFRQGV7KH)22'WHPSHUDWXUHUDQJHLVÂ)- Â)DQGWKHGHIDXOW
VHWWLQJLVÂ)
3UHVVDQGKROGWKH+,&/($5EXWWRQXQWLOWKHGLJLWVIODVK
3UHVVWKH+,&/($5EXWWRQWRVHW\RXUGHVLUHGWHPSHUDWXUH,WZLOOLQFrease one with
each SUHVV3UHVVDQGKROGWKH+,&/($5EXWWRQWRIDVWLQFUHDVH
3UHVVWKH/,*+702'(EXWWRQWRFRQILUPWKHVHWWLQJ
Note: Press HI/CLEAR to read your set maximum FOOD temperature.
7RGHVWUR\KDUPIXOEDFWHULDOLNH6DOPRQHOODDQG(&ROLWKH86'$UHFRPPHQGVWKH
following PLQLPXPLQWHUQDOWHPSHUDWXUHV
%HHI9HDO/DPE6WHDNV 5RDVWVDQG)LVK WREHÂ) (JJ
'LVKHV3RUNDQG*URXQG%HHI9HDO /DPE WREHÂ)
7XUNH\&KLFNHQ 'XFN:KROH3LHFHV *URXQG WREHÂ)
Setting HI (Maximum) BARBECUE Temperature
3UHVVWKH+,+5EXWWRQWRGLVSOD\WKHPD[LPXP%$5%(&8(WHPSHUDWXUHZKLFKZLOORQO\
be displayed IRUVHFRQGV7KHPD[LPXP%$5%(&8(WHPSHUDWXUHUDQJHLVÂ)â 572
Â)DQGWKHGHIDXOW VHWWLQJLVÂ)
Note: The unit will not allow you to set the maximum BARBECUE temperature below
the minimum BARBECUE temperature.
3UHVVDQGKROGWKH+,+5EXWWRQXQWLOWKHGLJLWVIODVK
3UHVVWKH+,+5EXWWRQWRVHW\RXUGHVLUHGWHPSHUDWXUH,WZLOOLQFUHDVHRQHZLWKHDFK
SUHVV3UHVVDQGKROGWKH+,&/($5EXWWRQWRIDVWLQFUHDVH
3UHVVWKH/,*+702'(EXWWRQWRFRQILUPWKHVHWWLQJ
Note: Press the HI/HR button to read your set maximum BARBECUE temperature.
Setting LO (Minimum) BARBECUE Temperature
3UHVVWKH/20,1EXWWRQWRGLVSlay the minimum BARBECUE temperature, which will
only be GLVSOD\HGIRUVHFRQGV7KHPLQLPXP%$5%(&8(WHPSHUDWXUHUDQJHLVÂ)â
Â)DQGWKH GHIDXOWVHWWLQJLVÂ)
Note: The unit will not allow you to set the minimum BARBECUE temperature above
the maximum BARBECUE temperature.
3UHVVDQGKROGWKH/20,1EXWWRQXQWLOWKHGLJLWVIODVK
3UHVVWKH/20,1EXWWRQWRVHW\RXUGHVLUHGWHPSHUDWXUH,WZLOOLQFUHDVHRQHZLWKHDFK
SUHVV3UHVVDQGKROGWKH/20,1EXWWRQWRIDVWLQFUHDVH
3UHVVWKH/,*+702'(EXWWRQWRFRQILUPWKHVHWWLQJ
Note: Press the LO/MIN button to read your set minimum BARBECUE temperature.
Activating the temperature alarm
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Author : j
Create Date : 2013:12:24 16:20:44+08:00
Modify Date : 2014:04:03 10:12:27+08:00
Has XFA : No
XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer : Acrobat Distiller 7.0 (Windows)
Creator Tool : PScript5.dll Version 5.2
Metadata Date : 2014:04:03 10:12:27+08:00
Document ID : uuid:282d9172-5d19-4b61-8fb4-95ece7fbbdb8
Instance ID : uuid:c22f7a0b-013c-4cd2-a4c2-2bbf5c39c0a2
Format : application/pdf
Title : 632 IM-OK-排版.pdf
Creator : j
Page Count : 2
EXIF Metadata provided by EXIF.tools