ECARE ELECTRONICS TP-11 Remote BBQ Grill Meat Thermometer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2840488
Application ID	1HC+fuB5lES4quVQ90Q4hw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	263.21kB (3290168 bits)
Date Submitted	2015-12-14 00:00:00
Date Available	2015-12-14 00:00:00
Creation Date	2015-11-16 14:58:27
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2015-11-16 14:58:27
Document Title	User Manual
Document Creator	CorelDRAW
Document Author:	windows7

ThermOPrn
REMOTE BBQ THERMOMETER INSTRUCTION MANUAL
Model No. TP-11
Introduction
Congratulations on your purchase at the Protessionat Remote Cooking
Thermometer, a programmable radio frequency food thermometer Vou Will
now be able to remotely monitorthe time and temperature of food cooking on
your grill trom anywhere, even in your home Temperature range of probe 15 B‘F
to Aaz‘F (-91:10 zso'c). :‘l 5”F/0 8°C accuracy. Probe Wires are heatresistant
to 662 F/350'C
Components
1. ‘l , recelverunlt.
2. ‘l stransrrlltter unit
3 1- detachable stainless steel prube sensor
4.272'AAAbatterles.
Receiver Features
TP-tt Receiver
STAND
Halley Compartment
LCD (Liquid Crystal Display) , Displays all icons. temperature and timer. The
backlinglH tlash Blue once theternperature increases tor. writ change
to Green when the temperature ISWlthlrl ls‘r olthe set temperature and WM
turn Red when it reaches the settemperature See LCD diagram tordetailed
information
CLlPe Battery compartmentcllp allows you to be mobile Clip the receiver unit
to belt.
BATTERY COMPARTMENTr Holds2AAAbatterles
Buttons
1. MODE , Press to select thermometer or timer mode. Press 8. hold tor 2
seconds to register with the transmitter
2. HR , ln timer mode. press to set hour. Press a. hold tor 2 seconds. the hours
will increase to hours per secnnd tn thermometer mode. presstc increase
thetemperature value Press a. hold ior2 seconds. the temperature value wlll
increase to degrees persecono,
3, ONsOFF/‘Fr'Cr Pressand hold ior2 seconds turns receivertunctionson and
clff ln thermometer mode press to select temperature readings in Celsius
or Fahrenheit,
4 MIN , tn timer mode, press to set minutes. Press a. hold tor2 seconds. the
minutes WlH increase in minutes persecond ln thermometermode. press to
decrease the temperature value Press & hold tor 2 seconds. the temperature
valuewllldecrease 10 degrees persecond.
5. MEATetnthermometermode. pressto setectmeattype. FROG (program).
GBEEF (ground heet). GPOUL(grolmd poultry) . BEEF. VEAL. CHCKE
(chicken). PORK. POULT (poultry) . LAME & FISH ln Timer mode sWitches
between hour/minute timer to a minute/second timerand back.
6. START STOPr Irl tlrrler mode. press to starter stcptrte timer
7 TASTE r In thermometer mode. select the meat taste leve‘. RARE. MED
RARE. MEDIUM. MED WELL and WELL DONE
LCD
TTrner mode Thennornenter mode
Timer mode hur
Probe temperature Set temperature reading
reading
Transmitter Features
TP-tt Transmitter
Sensor socket note
TX LED
to
fit
“rrcrg
STAND
eatery Compartment
Stand , Foid up stand tor easystorage.
Battery Compartments holds 2AAA batteries,
Sensor socket hole — plug in for stainless steel probe sensor
Buttons
ONVOFFI'FJCr Press and hoid tor 2 seconds turns transmitter on and oil.
Press to seiecttemperature readings in Ceistus or Fahrenheit
Registration Procedures
Open the battery compartment oi receiverand insert the two “AAA" batteries
Open the oattery compartment oi transmitter and insert the two "AAA" batteries.
The Protessionai Remote Cooking Thermometer needs the receiver to register
the radio trequency signal tram the transmitter
Transmitter 8r Receiver are 0".
t Plug the stainless steel probe sensor intothe plug in of the transmitter
2. Turn transmitter on by pressing and holding the ONsOFF/“Fs'C button tor
2seconds
3. Turn the receiver on by pressing and holding the ONsOFF/Ts‘c button tor
2 seconds.
4. Registration is complete when the receiver shows the probe temperature.
Auto Off feature:
The receiverwili turn 0" automatically it it hasn't receive the temperature signal
irom the Iransmitterlormore than 30 minutes iAbeep wili sound torone minute
oeiore it shuts down. However. the Auto on feature will be automatically disabled
irthetimerisrunning,
The transmitterwiii turn ouautomaticaily ii the temperature measured is always
iowertnan 501: (122'F) in izo minutes
Measure meat temperature to USDA doneness temperature
range
t Press MODE to select thermometer mode The upper display Will show a small
MEATand a meat type such as BEEF
2 Press MEAT to select meattype PROG (programt GBEEF (ground beef»
GPOUL (ground pouitry) ( BEEF, VEAL, CHCKE (chicken), PORK, POULT
(poultry). LAMBE. FISH
3. Press TASTE to seiecl the levei oi doneness forthe meat type seiected. RARE,
MED RARE, MEDIUM, MED WELLand WELL DONE
Note: The temperature displayed to the rightorthe actual meattemperature
PROBETEMPwiIi snow the preset temperature TEMP SETaccording to USDA
doneness levels Example: Eeeiwiit be Well Done at tes‘r
4. Once the temperamre oi meat reaches the preset doneriess level the receiver
wili beep and the LCD backiight wiil turn red
,4,
Measure meat temperature set to your spe taste
t Press MODE to select thermometer mode. The upperdlsplaywlll showa small
MEATand a meattype such as BEEF
2. Press HR or MIN to raise or Iowerthe set temperatureAs you press HR or
Min the display changes to PROG (program) Holding the button will raise
or Iowerthe temperature setting rapidly. Pressing MEAT will return you to
the presetUSDAranges
3 Once the temperature of meat reaches the preset doneness level the receiver
will beep and the LCD backlight will turn red.
Procedure fortypical use on an outdoor grill:
The following typical example will go through the steps to have the Protessional
Remote Cooking Thermometer alert you to when a beeisteak is cooked to
medium (USDAdoneness level) and remind you to rotate hotdogs in 5 minutes.
t Turn on the grill
2, Follow the registration procedure,
3, Place steak and hotdogs on grill rack.
4. Insert probe sensor Into the Center oithlckest portion 01 the steak. Avoid
touching bone or heavy fat areas Assume the meat temperature is 45>:
ui
. Position the probe sensorwne sothey Wlll not come into contactwith llames
and exit the grill surlaoe area wllhout being pinched/crushed by the grill cover.
5. Stand the transmitterawaytrorn heat source btgrill. Do NOTput transmitter
on closed cover or underthe cover The transmitter is not waterprool DO NOT
useinthe rain
. Press MEATso BEEF is displayed
Press TASTE so MEDIUM is displayed and 150T will be shown as the TEMP
SET.
9. Press MODEto ohangetotimermode.
10 Press MIN 5 times to set tor 5 rnlnutes so that 0:05 is displayed. Press START
/STOP to start the countdown Press MODE to go back to thermometer mode
WV
tt,ctip the receiverto yourbeltcrpocket and move up to too It away irom the
outdoorgrill Goindoorsiroesired
12 When 5 minutes are up the recelverwlll beep for 60 seconds.
13. When the temperature of probe in the steak reaches 55 F the LCD backllght
will llash blue,
14 When the temperature ol probe in the steak reaches as? the LCD backlight
wlll tlash green.
‘l5. When the temperature of probe In the steak reaches 150'F MEDlUM the
receiver Wlii beep and the LCD backllghl Wlii flash red
to Press STOP toturn ollthe alert.
17 Turn on grill Remove the probe sensor irom steak Always weara heat
resistantglove to touch the stainless steel probe sensorprwire during or
Just altercooking Do not touch With bare hands.
‘lE. Clean the stainless steel probe and dry thoroughly altereach and eyeryuse,
19 Turn oitthe transmitter.
HELPFUL HINTS
lithe receiver and/drthe transmitterdisplay LLLor HHH instead orthe probe
temperature. wait lor probe to reach room temperature. IiLtLor HHH is still
displayed it is likely the internal probe wire has shorted out eitherthrough
moisture orheatdamage.
Using the Timer
Countdown
‘l. Press MODE to selecttimer mode. The upperdisplay wtll showa smallTlMER
and 0:00.
2 Press HR and MIN button to set the timer. Press START/STOP button to start
countdown “V" will blinkroreverysecond
3. To stop the countdown process. press START/STOP button The “v" becomes
solid.
4. Press HR & MIN buttonstogetherto olearthe setting backto 0:00
Note‘ The mlhlmum settlng forlhe tlmer Isl minute When the timer counts
down below1nour1 00 the display will change to 59'59" display advising 59
minutes 59 seconds The secondswlll be shown counting down then When the
countdown reaches we" the timer starts counting up and it will beep tor so
seconds Thetimerand “AV " will blink. Press the START/STOP button to stop
beeping When the count up reaches 23 59 59 (55 seconds are notdisplayed)
the display will turn to 0 ou, the unit beeps and “AV“ wrll blinklorso seconds
Countup
1 Press MODEto seleottimer mode The upperdlsplaywlllshowasmallTlMER
andO 00
2 Press START/STOPbutton to start countup.The“A"wlll blinkforevery second.
3 To stop the count up process , press START/STOP button The “A " becomes
solid.
.5,
4. Press CLEAR button to clearthe setting back to 0:00.
HELPFUL HINTS
. Do not immerse the probe in water while cleaning.
. Do not allow the probe or probe Wire to come into contactwith names. "cooking
wrth grill cover closed‘ only use medium or low heat,
. lfme probe becomes detective Within 90 day warranty period please return
detective probe to address below along with return address and we wnl send
you new probe no charge
- it the temperature displayed seems to read too high orthe temperature seems
to increase too quickly check to make sure the probe tip is not poking through
the load to outside Reposition the probe tip in the centerorthe thickest part or
food Avoid touching bone orheavyfal areas,
Cautions:
. Always wear a heat resistant glove to touch the stainless steel probe sensor
or wire during urlustaltercouklng Do not touch With bare hands
. Keep the stainless steel probe sensorand wire away from children.
. Not Intended for Use by Persons ages 12 and Under
. Clean the stainless steel probe and dry thoroughly altereach and every use.
. Do not immerse the probe orwne in water. Clean using a damp. soapyoloth
. Do not usethe receiverortransmitterin the rain. They are nolwaterprool
. Do not expose the plug ot the stainless steel probe or the plug in hole oithe
transmitter to water or any liquid. This will result in a bad connection and
faulty readings.
. Do not expose the receiverortransmitlerto direct heal orsurface
. Do not use stainless steel probe in microwave oven
Cleaning
. Always weara heat resistantglove to touch the stainless steel probe sensor
orwire during oriust after cooking. Do not touch wrlh bare hands
. Keep the stainless steel probe sensorand wire away from children.
. Wash the metal probe tip with hot soapy water and drythoroughly Do not
immerse the probe in waterwhile cleaning.
n Wipe the transmilterand receiverwilh damp clolh Do not immerse eilher in
water.
FCC statement:
1 This device complies With Partts olthe FCC Rules, Operation is subject to
theloliowingtwo conditions
(inhisdevice may not cause harmlut interierence.
(2) This device must accept any interference received, including interlerence
thatrnay cause undesired operation.
2. Changes or modiiications not expressly approved by the party responsible
torcornpliance could void the user‘s authority to operate the equipment
LIMITED 90 DAYS WARRANTY
ThermoPm warrants this product to be tree ofdelects in parts, materials and
workmanship tor a period also days. lrom date at purohase,
snouid any repairs or servicing underthis warranty be required, contact Customer
Service by phone or email for instructions on how to pack and ship the product to
Therchro
CUSTOMER SERVICE
Telephone 1-877-515-7797(US&CAcnly)
Email:service@buythermopro.com
Hours Weekdays 9:00AM 5:00 PM EST
Thls warranty gives you speoiiio legal rights and you may also have other rights
which vary trorn state to state.
FCC Statement:
This equipment has been tested and tound to compiywith the iirnits tor a Ciass
B digitai device, pursuanttc part 15 otthe FCC Ruies. These limits are designed
to provide reasonacie protection against harmfui interierence in a residential
instaitation This equipment generates, uses and can radiate radio frequency
energy and it not instaiied and used in accordance with the instructions. may
cause harmiui interterence to radio communications.
However, there is no guarantee that interferencewili not occur in a particular
instaiiation irthis equipment does cause harmfui interference to radio or
teievision reception which can be determined by turning the equipmentdit
and on. the user is encouraged to try to correct the interterence by one or more
citheicliowing measures:
- Recrientorreiccate the receiving antenna,
- increase the separation between the equipmentand receiver.
- Connect the equipment to an cutieton a circuit different ironithat to which
the receiver is connected
This device cornches with part is cithe FCC rules, Operation is sucjecttcthe
iciiowmg two conditions: (1)This device may not cause harmful interference
and (2) this device must accept any interierence received including interference
that may cause undesired operation
Note: Modilicationsm (his product wiil void the user‘s authority to operate this
equipment

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Create Date                     : 2015:11:16 14:58:27+08:00
Modify Date                     : 2015:11:16 14:58:27+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Author                          : windows7
Creator                         : CorelDRAW
Title                           : TP-11说明书20150910测试转曲

EXIF Metadata provided by EXIF.tools