ECARE ELECTRONICS TP60 Indoor/Ourdoor humidity & Temperature Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3352687
Application ID	/u0Wvx9r3oc6bKHr80xpNg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.75kB (609324 bits)
Date Submitted	2017-04-11 00:00:00
Date Available	2017-04-11 00:00:00
Creation Date	2017-04-07 11:01:26
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-04-07 11:01:26
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Fusheng Liu

Indoor/Ourdoor humidity & Temperature Monitor
INSTRUCTION MANUAL
Model No. TP-60
Introduction
Congratulations on your purchase of the Professional Indoor/Ourdoor humidity & Temperature Monitor
, You will now be able to detect indoor and outdoor temperature and humidity.And can remember the past alltime and the past 24 hours, the maximum and minimum data
Components
1. One Receiver unit
2. One Transmitter unit
3. Four AAA batteries
Receiver Features
1. display : Displays the current outdoor humidity /temperature,and indoor humidity / temperature,
2. Battery Compartment: Holds 2* AAA battery to power the unit.
3. Totally wireless tabletop and wall-mounted design.
4. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C).
5.
Humidity range: 10% ~ 99%.
6.
7.
Temperature display unit: °C °F selectable
Temperature Resolution: 0.1 °C/°F
8. Humidity Resolution:1%
9. Low battery indication
Buttons
Channel/SYNC: press to Change between remote outdoor sensors1、2、3；Press and hold CHANNEL button
to search for the sensors.
°F/°C/All-time/24: Press to select the temperature display in ºC or ºF.When the maximum and minimum display
status, press once to display the maximum and minimum records of the last 24 hours
MAX/MIN/Clear:press to Change between current, maximum and minimum temperature & humidity;Press and
hold to Clear the history data.
Temperature & HUMIDITY Trend
1.
indicates the temperature & humidity is in a increasing trend.
2.
indicates the temperature & humidity is in a no change trend.
3.
indicates the temperature & humidity is in a decreasing trend.
Transmitter Features
1、Battery Compartment: Holds 2* AAA battery to power the unit.
2、 wall-mounted design.
4.
Outdoor Temperature range: -58°F ~ 158°F (-50 °C ~ 70 °C).
5.
Humidity range: 10% ~ 99%.
Use the Transmitter and Receiver
1、The receiver will automatically search the transmitter for 3 minutes when powered up.While the symbol blinks.
2、If the receiver has two batteries installed, and the time is more than 3 minutes.Press and hold CHANNEL button
to search for the Transmitter.
3、Install transmitter two batteries, or press the TX button, the transmitter's temperature and humidity data will be
displayed in the receiver.
4、If you have more than one transmitter, set the channel by switching CHANNEL 1, 2, 3 inside the battery
compartment. The battery compartment of the transmitter can be removed by a small screw driver. Press the TX
button once after switching channel.
5、Press the receiver channel/SYNC button 4 times,The receiver will cycle disply the temperature and humidity of
the three transmitters
6、If the battery is below 2.6V, the transmitter and receiver have a low battery indication above the LCD of the receiver.
Place the Receiver Station and Transmitter
1、The Receiver station should always be placed in a well ventilated indoor area and located away from vents,
heating or cooling elements, direct sunlight, windows, doors, or any other openings.
2、The Transmitter can be placed on a flat surface indoor or outdoor. The Transmitter should be keep away from
direct sunlight and moisture. Make sure the sensor is no more than 200 feet (60m) away from the Receiver station
and with minimal obstructions.
3、The Receiver station and Transmitter can both be wall mounted.
Maximum & Minimum Recorded Temperature & Humidity
1、Press MAX/MIN/Clear button to change between current, minimum, and maximum temperatures & humidity.
2、The default displays the maximum and minimum data for all past times，In this time, press once °F/°C/Alltime/24 button,Displays the maximum and minimum data for the last 24 hours.
3、When the maximum or minimum recorded temperature & humidity is showing, press and hold MAX/MIN
/Clear button to clear the currently records.
Hints and Tips
If the receiver does not connect to the transmitter, try the following:
● press and hold the CHANNEL button.and then Press TX on the transmitter
●Relocate the transmitter and / or the receiver until connection is found.
●Signals from other electronic devices may cause interference. Place the receiver and transmitter away from
these devices.
● The transmitter may not function properly in extremely temperatures due to battery power. Replace the
batteries or the unit will resume proper function in more moderate weather.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2010
Creator                         : Fusheng Liu
Creator Tool                    : Microsoft® Word 2010
Create Date                     : 2017:04:07 11:01:26+08:00
Modify Date                     : 2017:04:07 11:01:26+08:00
Document ID                     : uuid:CB3E81E9-99F0-4605-B27E-2BA8C8C4931B
Instance ID                     : uuid:CB3E81E9-99F0-4605-B27E-2BA8C8C4931B
Part                            : 1
Conformance                     : A
Author                          : Fusheng Liu

EXIF Metadata provided by EXIF.tools