EDU Science 137ELC Receiver used for 49MHz Radio Transmitter User Manual

EDU Science Co., Ltd. Receiver used for 49MHz Radio Transmitter Users Manual

Users Manual

TMFOR AGES 10 AND UPINSTRUCTIONS / PRECAUTONS1WARNING!- C AUTION: E lectrically operated product. Not recommended for children under 10 years of age. As with all electric products , precautions s hould be observed during handling and use to prevent electric shock. - K eep face, eyes, fingers , hair, body parts etc. away from the propeller and other moving parts .- Always fly the Vectron Ultralite in an open s pace.- Do not expose your V ectron Ultralite to rain or moisture.- Do not fly in a crowded environment.- Do not fly in a dusty area.- Do not fly in complete darkness.- E nsure people know that you are flying the V ectron Ultralite.- Use only your Ultralite controller included in this package.- Always turn your Vectron Ultralite "OF F " when not in use.General- Y our Vectron Ultralite must not be used if there is any damage to the AC adaptor, charging cord, charging socket, rechargeable battery, propeller, ring or other parts of the Vectron Ultralite.- Do not attempt to lift objects with your V ectron Ultralite.- Vectron Ultralite is a high tech precision instrument and is vulnerable to misus e P rotecting all components is an essential part of flight maintenance. - This toy is not intended for children under 3 years old.- The instruction manual contains important information and must be kept.- This toy only operates with s upplied AC adaptor.- The us e of the AC adaptor should be supervised by an adult and examined regularly.- This toy must not be used if there is any damage to the power cord, plug and other parts of the transformer.- The AC adaptor mus t be disconnected before cleaning.AC Adaptor Important Information38Battery Care - F or maximum performance, always allow your battery of the V ectron Ultralite to drain before recharging.- Never charge a second time without discharging first. T his will affect or damage the battery. - Do not dispos e of the battery in your regular household waste.- C ontact your local waste management officials for information on environmentally sound dis posal of rechargeable batteries.- If a battery leak develops, avoid contact with leaking fluid. P lace the damaged battery in a plastic bag for proper disposal.- If fluid comes in to contact with skin or eyes, wash with cool water for at least 15 mins.Battery Disposal- Y our Vectron Ultralite is only to be charged under adult s upervision.- Never expose the Vectron Ultralite battery pack to direct sun, hot areas, or fire as it may explode.- The Ultralite charger and battery may become warm during charging. - The Ultralite charging cord must be disconnected from the Vectron Ultralite when it is fully charged.- Never leave your Vectron Ultralite connected to the AC adaptor overnight.- Never overcharge the Vectron Ultralite as it can damage the rechargeable battery.Battery Safety TIPS: - For your first flight, ensure there are no strong air currents from fans, air conditioners or open windows.- Adjust the trigger to find the correct position so your Vectron Ultralite will hover preventing it from flying too high or too low. It will take some practice to get the hang of it. - Always point the thrust transmitter towards your Vectron Ultralite to ensure a steady controllable flight.- Do not try to land your Vectron Ultralite on to the launch platform. Try to land on any open floor area.- Your Vectron Ultralite can also take off from any smooth flat surface. Do not try to take off from deep pile carpet or soft furniture. This may jam the propeller before take off.L earning More About Y our Vec tron Ultralite Vectron Ultralite   F lying R ange   50 ft. (15 m)  T echnical S pec ifications 9V (6LR 61) alkaline batteriesUltralite C ontroller B atteries  P ower C onsumption 0.3 W (P eak)10 and UP R ecommended AgeWorking Voltage (DC ) 6.5 V ~ 9 VWorking Voltage 5 VWorking C urrent 8 W (P eak) R echargeable Battery Type 6 V 100mA Ni-MH Ultralite C harging DevicesI) AC Adaptor Output DC 13V 0.6A AC Adaptor Input 120V AC 60Hz 10WC harge Duration 10 minutes (max.)- V detect plus mas ter timeout C harge MethodBattery Removal- R emove the 3 s crews on the top of the Vectron Ultralite with a P hilips screwdriver, disassemble the unit and remove the rechargeable battery.(1)CLOSE OPEN(2) (3) (4)29Y our Vectron Ultralitedoes not res pond to thethrus t transmitter.The thrust transmitter battery is low. The red LE D does not flash after depres sing the trigger.R eplace the 9V (6LR 61) Alkaline battery with new one.The thrust transmitter battery is inserted improperly.C heck and reins ert the battery with the proper polarity as per the markings in the holder.Y our Vectron Ultralite is out of range. Move clos er to your Vectron Ultralite.NOT E : T he trans parent labels underneath the ring are for protection agains t the propeller. A damaged ring can be repaired with trans parenttape. S ome glues may damage the polyfoam ring.Y ou are outdoors or flying in a largeroom with high ceiling.F ly indoors with the appropriate ceilingheight.TroubleshootingY our AC Adaptor is the wrong type or damaged preventing it from charging your Vectron Ultralite.C ontact your support team at service@ bhsciencetech.com stating the voltage and plug type required. Do not return your Vectron Ultralite to the retail s tore.The propeller auto-stop feature is activated. T his feature is activated when the propeller is obstructed by body parts or objects. If your Vectron Ultralite crashes on to the floor, this may trigger the auto-stop feature as well. The red and green LE D will blink alternately. R es et your Vectron Ultralite by switching it off and turning it back on again to resume flight.P roblem P os s ible C aus e S olution Y our Ultralite battery is not charged. C harge your battery fully before flying.The battery power is low. R echarge the battery fully.Y our Vectron Ultralite is not placed properly onto the launch platform.P lace your V ectron Ultralite properly s itting in the middle of the launch platform.Y our Vectron Ultralite is out of range. The green LE D does not come on which means there is no signal transmiss ion.Move clos er to your Vectron Ultralite.The trigger is not depres sed far enough on the thrus t trans mitter.Depres s the trigger at leas t half way.The room may have drafts from windows , fans, air conditioner and ventilation s ys tems.Minimize the drafts before take off.Operator error. Wait for the red LE D to flas h before trying to take off.Y our Vectron Ultralite does not take off.No power to the propeller.S lide the power switch to the ON position.P ower switch is not turned on.Battery Safety Guidelines- To prevent battery leakage: B e sure to insert batteries correctly.- B atteries should be replaced by adult.- Never dispose of batteries in fire as this may caus e them to explode.- Do not mix old and new batteries (replace all batteries at the same time).- Do not mix Alkaline, standard (C arbon-Zinc) or rechargeable (Nickel-C admium) batteries (or equivalent). Only batteries of the same or equivalent type as recommended are to be used.- Non-rechargeable batteries are not to be recharged.- Always remove exhaus ted or dead batteries from product. R emove batteries from product which is not going to be us ed for a long time. Otherwise the batteries may leak and cause damage.- The supply terminals are not to be s hort-circuited.- Make sure battery compartment is secure.- Do not immerse battery operated toys. W ipe clean only.6II) Flight Preparation1) P lace your V ectron Ultralite on to the launch platform.WA R NING : Never recharge your Vectron Ultralite a second time without having flown first. Continuous recharging without discharging first, will damage the Ultralite battery. CAUTION: Always recharge your Vectron Ultralite with suppliedAC Adaptor! Operate with third-party AC Adaptor may cause damage to this product.2) NOT E S : - The red and green LED will blink alternately. It will take approximately 10 minutes to charge your Vectron Ultralite completely; at this point the green LED will flash continuously. - When your Vectron Ultralite is new or has not been flown for a long time it will take several charge/discharge cycles for the battery to reach its full flight time.E ns ure your Vectron Ultralite is switched OF F , then connect the charging cord to your Vectron Ultralite.IMP OR T ANT :a) Ensure the AC Adaptor voltage and plug is suitable for your area.b) Connect the AC Adaptor to the wall outlet. 5I) Thrust Transmitter2) Insert one size "9V" (6LR 61) Alkaline batteries.TriggerP ower On Indicator1) Open or close the cover with a P hilips screwdriver.CLOSE OPENAntenna74ContentsAuto-stop S afety P ropellerAC Adaptor Thrus t Trans mitter L aunch P latformR echargeable B atteryR ed LE DG reen LE DP ower S witch (ON / OF F )Ring C harging S ocketNOTE: After the red and green LED blink alternately, the red LED will start to flash slowly. At this time your Vectron Ultralite is ready for take off.III) Flying, Hovering and Landing Your Vectron Ultralite1) 2) S witch on your V ectron Ultralite.IMPORTANT: Ensure your Vectron Ultralite is fully charged for first time use and that you have a least 10 ft. (3 m) of clear area. 3) P ress the trigger to control your V ectron Ultralite. NOTE: Flying Range is around 50 ft.(15 m)ONOFFWith your V ectron Ultralite on the launch platform, unplug the charging cord.15 meter15 meterAttention to maximize the life of your Vectron Ultralite- Avoid continuously running at full power against a low ceiling, as this will shorten the saucers motor life.- nstead hover and swoop below ceiling height or fly outdoors if wind condition permits. - This will insure many hour of flying fun with your Vectron ultralite.

Navigation menu