EION SP1110-01 WIRELESS-N NETWORK MINI PCI ADAPTER AND SUPPORTING SINGLE BOARD COMPUTER IN AN ENCLOSURE WITH INTEGRATED ANTENNA (CPE) User Manual INSTRUCTIONS

Download:
Mirror Download [FCC.gov]
Document ID	1752734
Application ID	ZoXb9l0shZ16QFd4LraVYA==
Document Description	INSTRUCTIONS
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	260.64kB (3258023 bits)
Date Submitted	2012-07-26 00:00:00
Date Available	2012-07-26 00:00:00
Creation Date	2017-10-30 20:53:51
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-30 20:53:51
Document Title	INSTRUCTIONS
Document Creator	ScanPDFMaker 1.0

Compex Systems Pte Ltd
#03701 F'M Industrial Building.
m 135 Joe Seng Road Singapore 358363
"'mrk‘gw Tel (6505286 2086 Fax (635)5280 9947 Co Reg No 1956012584
:- 3
Instructions and Conditions for use Compex Module WLM200NX
The following are instructions for the use of the Radio Module (miniPCI card radio
adaptor) WLMZOONX by third parties who are integrating this device into their products
This is required to ensure that the module is utilized according to the conditions the
approval was given by the FCC
The Compex WLMZOONX radio Module has been modularly approved by the FCC to
operate in the role as a limited single—modular transmitter: a single—modular transmitter
(adaptor) that complies with the Section 15.212(a)(l) modular rules. only when
constrained to specilic operating host(s) and/or associated grants condition(s):
This module is hosted by a single board computer and its mode ol‘operation is controlled
by drivers and software resident on the board The module does not operate as a
standalone but rather is an adaptor device and is meant to be integrated into a PC. Laptop
or into a digital access point base station, subscriber access station or other similar
applications. The radio module in all these cases is a peripheral radio device connected
by a PCI bus ofthe host processor. which controls the radio.
To be integrated radio module has the following characteristics and requirements. which
must be met. or not be defeated in any way by the application it is being used in. They
are: .
1 . General
I The module complies with all specific rules applicable to the
transmitters grant. The module must be used by the integrator in
accordance to the conditions provided in the integration instructions by
the grantee (Compex)
2. Physical Characteristics and Restrictions Guidance
a 'l he radio elements have the radio frequency circuitry shielded which
is not to be removed or modified for integration in a new product or
application.
a The system has isolated / buffered data inputs (Ethernet) \ ia the
computer board port to ensure that the device will continue to comply
with Part 15 requirements with any type ofinput signal.
t The module relies on stable power supply regulation from the
computer board. which is to be 33V. The SEC must supply 3.3 V at
full RF power at the highest data rate
COW
“om-@wm
Compex Systems Pte Ltd
#08»m PM Industrial Budding,
135 Joe Seng Road, Singapole 366353
Tel ISSDGZBG 2086. Fax'(65)6280 9947 CO Reg No 198501256N
The module contains a unique antenna connector MMCX that must be
used for attaching an antenna cable or adapter to the antenna. The
product can be marketed and operated only with specific antenna(s).
per FCC Sections 151203. 152040)), 15.204(c). 15.212(a). 2.929(1)).
The drivers used by the integrator must be compatible with the Radio
Module and not alter the functions ofthe radio module as to make it
violate the conditions ofthe Modules Grant. The frequencies
bandwidths. channelization. output power. modulation types. spread
spectrum and protocols must comply with pan 15. Drivers can be
modified for features that do not cause violation of part 15 miles.
Compex supplies a driver that can be downloaded for the radio
module. There are several sources for radio drivers that can be used
vtith the radio. Drivers directly employed or modified for the radio
must not allow the user to violate the FCC rules for the 2.4 GHZ and
5.725 to 5.850 GHZ bands.
The unit‘s power adjustment range allows it to be controlled by user
command The power range of the WLMZOONX module is +1 to 18
dBm per channel. The allowed maximum output power for devices in
the 5.725 to 5.845 GHZ band is 30 dBm maximum at the RF output
temtinals. The input sensitivity is better than —96 dBm. In MIMO
applications. both transmitters will be running and synchronized to
each other with the same RF output power. frame timing. BW and
frequency characteristics.
"Thc radio module cannot be used with post power amplifiers. which
cause the radio to exceed output power limitation ofthe bands or result
in interference to other channels.
EIRP ofthe antenna gain plus the maximum radioyoutput power must
not exceed the limits stipulated for the 5.72SGHZ to 5.850 GHZ band.
The levels are +36 dBm in point to multipoint links and unrestricted in
point to point operations.
3. RF Exposure SAR Compliance
The module must comply with RF exposure requirements. This
module is to be used for outdoor applications. PCs or similar
applications where 20 cm is maintained between the user and the
radiating device. It cannot be used in laptops. tablets or similar
handheld portable devices. (ref2.1091(b) see below) Otherwise
SAR criteria applies and testing must be demonstrated by Compex
and any SAR requirements followed through by the integrator if
necessary.
The radio module is not to be used in a portable or handheld device
unless specifically modularly approved to be used in that manner.
networkwwork
Compex Systems Pte Ltd
#oe-ot PM industrial Bulldlng.
135 Joe Sang Road SlngaDDfe 358363
Tel (55)6286 2086 Fax {55)6280 9947 Co Reg No 198601256N
o l he WLMZOONX module (Adapter) is approved and meant for fixed
wireless systems for outdoor use. It can utilize integrated antennas
that are part of a mast mountable enclosure or external antennas that
are cabled to an enclosure using coaxial connectors.
I Any antenna used with this module must be installed to provide a
separation distance of at least 20cm from all persons. The product
consists oftwo transmitter ports. which make up the MIMO radio.
1 hese two transmit simultaneously and connect to a dual plane
antenna (H/V). No other connection is allowed to a
(antenna or transmitter, except in accordance with FCC multi
transmitter product procedures which apply to the MlMO system.
0 Definition of mobile and fixed devices can be found in FCC section
2 l09ltb) 'a mobile device is defined as a transmitting device
designed to be used in other than fixed locations and to generally be
used in such a way that a separation distance of at least 20
centimeters is nonnally maintained between the transmitter's
radiating structure(s) and the body of the user or nearby persons. ln
this context. the term "fixed location" means that the device is
physically secured at one location and is not able to be easily moved
to another location. Transmitting devices designed to be used by
consumers or workers that can be easily re-located. such as wireless
de\ ices associated with a personal computer. are considered to be
mobile devices ifthey meet the 20 centimeter separation
requirement,‘
4. Declaration of Conformity — Assurance
- "l o ensure compliance with all non-transmitter functions you are
responsible as the host manufacturer for ensuring compliance with the
modulets) installed and fully operational in the product. For example.
it a host was previously authorized as an unintentional radiator under
the Declaration of Conformity procedure without a transmitter
certified module and a module is added. the host manufacturer is
responsible for ensuring that after the module is installed and
operational the host continues to be compliant with the Part lSB
unintentional radiator requirements. This will require testing of the
product by an approved FCC 71C (Industry Canada) Testing
Laboratory.
0 T esting is required to verify whether the product will meet class A or
B criteria for unintentional radiation limits,
0 The installation and use of the module must follow any guidance of
(‘ompex (the modules maker) who holds the FCC grant for the module
to ensure compliance with FCC Part 15B requirements.
Compex Systems Pte Ltd
" 3 woe-01 PM Industrial Butldmgt
135 J00 Sang Road Singapore 368363
at work
‘ @work Tel (65mm 2085 Fax (sstszso 9947 Co Reg No 195601256N
- Please Note: Separate approval and testing is required for all other
operating configurations. including portable configurations where
enclosures. antenna configurations. main or peripheral circuit boards
ha\ e changed significantly with a product, (ref FCC Sect 2.1093)
I Often composite devices contain pans that are already having DoC
along with certified modules, DoC testing still has to be done for the
whole package since this is a different set of conditions the hardware is
being utilized. This also means that the labeling must reflect both the
FCC ID (or FCC IDs) ofthe modules and the DoC FCC logo for the
m crall product( sec label section as well) 7 Ref Multiple
Authorization Procedures KDB78478 D01 v07
- Importation into the US-(Reference KDB 997198 FCC documents).
'I he requirements and different conditions that an RF product can be
imported to the US are defined here. For importation. fomi 740 must
be completed for the COMPEX radio module. The condition is that the
FCC issued a "Grant of Equipment Authorization" for the FCC ID
number on the radio module. For equipment that is granted under the
Certification Equipment Authorization procedure and a FCC ID is
issued form. 740 must be completed for importation of the module or a
finished product using the module that may have its own FCC ID
issued.
5. User Manual
0 General Guidance
0 There will not be any illustrations or procedures in the end user
manual on how to remove or replace radio modules contained
in the equipment. — .
0 Instructions or statements made below are required to be
placed in the end—user’s operating manual of finished products
- The manual shall contain the following statements, They are:
0 The radio system has no user serviceable parts and must remain
a sealed enclosure for warranty to stay in effect. Servicing
must be done by a qualified technician or manufacture
authorized Service Shop The radio portion of the product
cannot be modified. or substituted in the product except under
apprOpriate FCC approval by the product manufacturer.
0 This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (I) This device ma)
not cause harmful interference, and (2) this device must accept
any interference received. including interference that may
cause undesired operation. (This statement shall be printed n
the label of the equipment ifpossible).
numoWom
Compex Systems Pte Ltd
#08701 PM lndustnal Bulldmg‘
135 Joe Seng Road Smgapofe 368363
Tel (55)6286 2056 Fax155)6250 9947 Co Reg No I98601256N
3 FCC Part 15 Class A. Radio Frequency Interference (RFl)
(FCC l5.105) Statement:
. This equipment has been tested and found to comply
with the limits for Class A digital devices pursuant to
Part 15 ofthe FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential environment. This
equipment generates, uses. and can radiate radio
frequency energy. and if not installed and used in
accordance with the instruction manual. may cause
harmful interference to radio communications,
However. there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by tuming the
equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following
measures:
0 Reorient or relocate the receiving antenna.
- increase the separation between the equipment
and the receiver,
0 Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
0 Changes or modifications to the equipment not expressly
approved by the “vendor". could void the user’s authority to
operate the equipment.
0 Appropriately shielded remote [/0 serial cable with the metal
connector shell and cable shield properly connected to chassis
ground and shielded Ethernet Cables shall be used to reduce
the radio frequency interference.
C All antenna installation work shall be carried out by a
knowledgeable and professional installer.
6. Labeling and Location ofLabels
I The radio module as well as the integrated product itself must have an
apprm ed FCC label in plain View The label must have the correct content
as specified by the FCC. The OEM integrator must follow the instructions
provided here to ensure the equipment is shown to be compliant to the
user HS well to identify the equipment correctly. All FCC approved
modules must be labeled with its permanently affixed FCC ID label. This
natworstwork
Compex Systems Pte Ltd
mam PM industrial Bulldmg.
135 Joe Seng Road Singapore 368363
Tel (55)6285 2056 Fax (65)6280 9947 Co Reg No tsssotzseN
I cannot be tampered with by the integrator and is to be installed with the
device
0 In the event that the approved modules labels cannot be seen by the user
from the outside. the product enclosure must be appropriately labeled and
have specified information as described below. The labels‘ location will
be described in the user manual. The label must be easily locatable by the
user on the product enclosure.
0 For a host using a certified modular with a standard fixed labelr if(l) the
module‘s FCC ID is not visible when installed in the host. or (2) it‘the host
is marketed so that end users do not have straightforward commonly used
methods for access to remove the module so that the FCC ID of the
module is \ isible; then an additional permanent label referring to the
enclosed module: Contains Transmitter Module FCC ID: XYZMODEH“
or “Contains FCC ID: XYZMODELI" must be used.
0 The host OEM user manual must also contain clear instructions on how
end users can find and/or access the module and the FCC ID if possible
without showing how the module can be removed.
- The label or statement shall be etched, engraved. stamped. indelibly
printed. or permanently affixed to a permanently attached part of the
equipment. and be visible at the time ofpurchase on the exterior of the
equipment enclosure
0 The external label shall have the following statements clearly rendered on
the label “This device complies with Part 15 of FCC rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received. including interference that may cause undesired
operation."
I f the product also contains hardware that has been tested and has had a
Declaration ofConformation given to it the label must reflect this by
displu} ing the FCC logo (see sample below). This can be on a separate
abel u ith other pertinent information. The compliance statements can
also be rendered on this label for information.
Trade name
ModeI number

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 0000:01:01 00:00:00
Producer                        : Image Library (PDF - 300 dpi)
Creator                         : ScanPDFMaker 1.0
Page Count                      : 6

EXIF Metadata provided by EXIF.tools