EION SP5300-01 WIRELESS-N NETWORK MINI PCI ADAPTER AND SUPPORTING SINGLE BOARD COMPUTER IN AN ENCLOSURE WITH INTEGRATED ANTENNA (CPE) User Manual Instructions

Download:
Mirror Download [FCC.gov]
Document ID	1745281
Application ID	s/o0MV+nD3vx4//iph0UcQ==
Document Description	Instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	260.74kB (3259201 bits)
Date Submitted	2012-07-17 00:00:00
Date Available	2012-07-17 00:00:00
Creation Date	2017-10-30 23:02:06
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-30 23:02:06
Document Title	Instructions
Document Creator	ScanPDFMaker 1.0

o Compex Systems Pte Ltd
m «never PM lndustrlal Budding.
(k 135 Joe Seng Road Slngapore 368363
""“°"‘5@W° Tel (65)6285 2056 Fax (6516280 9947 Co Reg No t9560t255"
instructions and Conditions for use Compex Module WLM2OON5-26-ESD
The following are instructions for the use ofthe Radio Module (miniPCI card radio
adaptor) WLM200N5-26-ESD by third parties who are integrating this device into their
products
This is required to ensure that the module is utilized according to the conditions the
approval was given by the FCC.
The (‘ompex WLMZOONS-Zo-l-ISD radio Module has been modularly approved by the
FCC to operate in the role as a limited single-modular transmitter: a single-modular
transmitter (adaptor) that complies with the Section 15.212(a)(l) modular rules. only
when constrained to specific operating host(s) and/or associated grants condition(s):
This module is hosted by a single board computer and its mode ofoperation is controlled
by drivers and software resident on the board. The module does not operate as a
standalone but rather is an adaptor device and is meant to be integrated into a PC. Laptop
or into a digital access point base station. subscriber access station or other similar
applications. The radio module in all these cases is a peripheral radio device connected
by a PCI bus ofthe host processor. which controls the radio.
To be integrated radio module has the following characteristics and requirements. which
must be met. or not be defeated in any way by the application it is being used in. They
are:
1. General
I The module complies with all specific rules applicable to the
transmitters grant, The module must be used by the integrator in
accordance to the conditions provided in the integration instructions by
the grantee (Compex)
2. Physical Characteristics and Restrictions Guidance
I The radio elements have the radio frequency circuitry shielded which
is not to be removed or modified for integration in a new product or
application. '
o The system has isolated / buffered data inputs (Ethernet) \‘ia the
computer board port to ensure that the device will continue to comply
thlh Part 15 requirements with any type ofinput signal.
0 The module relies on stable power supply regulation from the
computer board. which is to be 3,3V. The SBC must supply 33 V at
full RF power at the highest data rate.
.,A\
fie \
m i
l: 't
‘3 '>/
. o
x-tm/
u ,,
«Monument
Compex Systems Pte Ltd
#0501 PM Industrial Bulldlng
135 Joo Seng Road SmgaDDfe 365363
Tel (65)6285 2056 Fax (65)6280 9947 Co Reg No 198601256N
The module contains a unique antenna connector MMC X that must be
used for attaching an antenna cable or adapter to the antenna. The
product can be marketed and operated only with specific antennats).
per FCC Sections 15.203. 15.204(b). 15.204(e). 15.2l2(a). 2.929(b).
I The drivers used by the integrator must be compatible with the Radio
Module and not alter the functions of the radio module as to make it
violate the conditions of the Modules Grant. The frequencies.
bandwidths. channelization. output power. modulation types. spread
spectrum and protocols must comply with part 15. Dri\ ers can be
modified for features that do not cause violation ot'part 15 rules.
Compex supplies a driver that can be downloaded for the radio
module. There are several sources for radio drivers that can be used
vtith the radio. Drivers directly employed or modified for the radio
must not allow the user to violate the FCC rules for the 2.4 GH7 and
5.725 to 5.850 GHZ bands.
t The units power adjustment range allows it to be controlled by user
command. The power range ofthe WLMZOONS-Zo-ESD module is H
to 18 dBm per channel. The allowed maximum output povser for
de\ ices in the 5.725 to 5.845 GHz band is 30 dBm maximum at the RF
output terminals. The input sensitivity is better than -% dBm. ln
MIMO applications. both transmitters will be running and
synchronized to each other with the same RF output power. frame
timing. BW and frequency characteristics.
0 "The radio module cannot be used with post power amplifiers. which
cause the radio to exceed output power limitation of the hands or result
in interference to other channels.
I ElRP of the antenna gain plus the maximum radionoutp'ut power must
not exceed the limits stipulated for the 5.725GHZ to 5.850 GI [2 band.
The levels are +36 dBm in point to multipoint links and unrestricted in
point to point operations.
3. RF Exposure SAR Compliance
0 The module must comply with RF exposure requirements. This
module is to be used for outdoor applications. PCs or similar
applications where 20 cm is maintained between the user and the
radiating device. It cannot be used in laptops. tablets or similar
handheld portable devices. (ref2.1091(b) see below). Otherwise
SAR criteria applies and testing must be demonstrated by Compex
and any SAR requirements followed through by the integrator if
necessary.
a 'l he radio module is not to be used in a portable or handheld device
unless specifically modularly approved to be used in that manner.
,.\\
nltworstwork
Compex Systems Pte Ltd
#08701 PM lndustrial Buildmg
135 Joe Sang Road Singapore 365363
Tel (amazes 2086 Fax issiszso 9947 co Reg No tSEGOtZSGN
The WLM200N5-26-ESD module (Adapter) is approved and meant
for fixed wireless systems for outdoor use. It can utilize integrated
antennas that are part of a mast mountable enclosure or external
antennas that are cabled to an enclosure using coaxial connectors.
Any antenna used with this module must he installed to provide a
separation distance ofat least 20cm from all persons. The product
consists oftwo transmitter ports. which make up the MIMO radio.
These two transmit simultaneously and connect to a dual plane
antenna (H/V). No other connection is allowed to a
(antenna or transmitter. except in accordance with FCC multi
transmitter product procedures which apply to the MIMO system.
Definition of mobile and fixed devices can be found in FCC section
2.109l(b) ‘a mobile device is defined as a transmitting device
designed to be used in other than fixed locations and to generally be
used in such a way that a separation distance ofat least 20
centimeters is nonnally maintained between the transmitter's
radiating structure(s) and the body ofthe user or nearby persons In
this context. the term "fixed location" means that the device is
physically secured at one location and is not able to be easily moved
to another location. Transmitting devices designed to be used by
consumers or workers that can be easily re-located. such as wireless
devices associated with a personal computer. are considercd to be
mobile devices ifthey meet the 20 centimeter separation
requirement..
4. Declaration of Conformity - Assurance
To ensure compliance with all non-transmitter functions you are
responsible as the host manufacturer for ensuring compliance with the
module(s) installed and fully operational in the product. For example.
ifa host was previously authorized as an unintentional radiator under
the Declaration of Conformity procedure without a transmitter
certified module and a module is added. the host manufacturer is
responsible for ensuring that after the module is installed and
operational the host continues to be compliant with the Part 15B
unintentional radiator requirements This will require testing ofthe
product by an approved FCC ~ lC (Industry Canada) Testing
Laboratory.
Testing is required to verify whether the product will meet class A or
B criteria for unintentional radiation limits.
The installation and use ofthe module must follow any guidance of
Compex (the modules maker) who holds the FCC grant for the module
to ensure compliance with FCC Pan 15B requirements.
nuworkléwom
Compex Systems Pte Ltd
#05701 PM Industrial Butldmg
135 Joe Seng Road SIHQEDOVE 365363
Tel tsfil6286 2086 Fax t65l6280 9947 Co Reg No 198601255N
Please Note: Separate approval and testing is required for all other
operating configurations. including portable configurations where
enclosures. antenna configurations. main or peripheral circuit boards
ha\e changed significantly with a product. (ref FCC Sect 2.1093)
Often composite devices contain parts that are already having DoC
along with certified modules. DoC testing still has to be done for the
whole package since this is a different set ofconditions the hardware is
being utilized. This also means that the labeling must reflect both the
FCC ID (or FCC IDs) ofthe modules and the DoC FCC logo for the
overall product ( see label section as well) 7 Ref Multiple
Authorization Procedures KDB78478 D0l v07
Importation into the US-(Reference KDB 997198 FCC documents).
The requirements and different conditions that an RF product can be
imported to the US are defined here. For importation form 740 must
be completed for the COMPEX radio module. The condition is that the
FCC issued a "Grant of Equipment Authorization" for the FCC ID
number on the radio module. For equipment that is granted under the
Certification Equipment Authorization procedure and a FCC II) is
issued form. 740 must be completed for importation of the module or a
finished product using the module that may have its own FCC ID
issued.
5. User Manual
General Guidance
0 There will not be any illustrations or procedures in the end user
manual on how to remove or replace radio—modules contained
in the equipment. '
0 Instructions or statements made below are required to be
placed in the end-user‘s operating manual of finished products
The manual shall contain the following statements. They are:
c The radio system has no user serviceable parts and must remain
a sealed enclosure for warranty to stay in effect. Servicing
must be done by a qualified technician or manufacture
authorized service shop. The radio portion of the product
cannot be modified. or substituted in the product except under
appropriate FCC approval by the product manufacturer.
0 This device complies with part 15 ofthe FCC Rules. Operation
is subject to the following two conditions: (I) This device may
not cause harmful interference and (2) this device must accept
any interference received. including interference that may
cause undesired operation. (This statement shall be printed n
the label ofthe equipment ifpossible).
notworks@work
Compex Systems Pte Ltd
#0801 PM Industrlal Buildth
135 J00 Sang Road. Smgapcle 368363
Tel (65)6285 2056 Fax (65)6280 9947
Co Reg No 198601256N
FCC Part 15 Class A. Radio Frequency Interference (RFI)
(FCC 15.105) Statement:
This equipment has been tested and found to comply
with the limits for Class A digital devices pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential environment, This
equipment generates. uses. and can radiate radio
frequency energy. and ifnot installed and used in
accordance with the instruction manual. may cause
harmful interference to radio communication .
However. there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception. which can be determined by turning the
equipment otfand on. the user is encouraged to try and
correct the interference by one or more ofthe following
measures:
I Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment
and the receiver.
I Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
I Consult the dealer or an experienced radio/TV
technician for help.
0 Changes or modifications to the equipment not expressly
approved by the "vendor". could void the user‘s authority to
operate the equipment,
Appropriately shielded remote 1/0 serial cable with the metal
conncctor shell and cable shield properly connected to chassis
ground and shielded Ethernet Cables shall be used to reduce
the radio frequency interference.
All antenna installation work shall be carried out by a
knowledgeable and professional installer.
6. Labeling and Location of Labels
The radio module as well as the integrated product itself must have an
approx ed FCC label in plain View, The label must have the correct content
as specified by the FCC . The OEM integrator must follow the instructions
provided here to ensure the equipment is shown to be compliant to the
user as well to identify the equipment correctly. All FCC approved
modules must be labeled with its permanently affixed FCC ID label. This
K o ;)
nemnrksmark
Compex Systems Pte Ltd
woe-at PM Industnal Bulldlng.
135 Joe Seng Road Smganofe seasss
Yet (65)6286 2086 Fax [65)6280 9947 Co Reg No 198601255N
cannot be tampered with by the integrator and is to be installed with the
device.
In the event that the approved modules labels cannot be seen by the user
from the outside. the product enclosure must be appropriately labeled and
have specified information as described below. The labels‘ location will
be described in the user manual. The label must be easily locatable by the
user on the product enclosure,
For a host using a certified modular with a standard lixed label. iftl) the
module's FCC ID is not visible when installed in the host. or (2) ifthe host
is marketed so that end users do not have straightforward commonly used
methods for access to remove the module so that the FCC ID of the
module is visible: then an additional permanent label referring to the
enclosed module: Contains Transmitter Module FCC ID: XYZMOI)ELI“
or "Contains FCC ID: XYZMOI)EL1" must be used.
The host OEM user manual must also contain clear instructions on how
end users can find and/or access the module and the FCC II) it possible
without showing how the module can be removed.
The label or statement shall be etched. engraved. stamped. indelibly
printed. or permanently affixed to a permanently attached pan of the
equipment. and be visible at the time of purchase on the exterior of the
equipment enclosure
The external label shall have the following statements clearly rendered on
the‘label “This device complies with Part 15 of FCC rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation." i '
lfthe product also contains hardware that has been tested and has had a
Declaration ofConformation given to it the label must reflect this by
displaying the FCC logo (see sample below) This can be on a separate
abel with other pertinent information, The compliance statements can
also be rendered on this label for information.
Trade name
Model number

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 0000:01:01 00:00:00
Producer                        : Image Library (PDF - 300 dpi)
Creator                         : ScanPDFMaker 1.0
Page Count                      : 6

EXIF Metadata provided by EXIF.tools