ELDAT RTM08916 RTM08 Transmitter Module User Manual RZZRTM08916 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3792536
Application ID	gStxtnXUS2KRvq1zj2f7Bg==
Document Description	RZZRTM08916_UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.19kB (214917 bits)
Date Submitted	2018-03-23 00:00:00
Date Available	2018-03-23 00:00:00
Creation Date	2018-02-23 11:15:09
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-02-23 11:15:09
Document Title	Radio Control System Rx868/2 · Rx433/2 · Rxw868/2 · Rxw433/2
Document Creator	Microsoft® Word 2013
Document Author:	a.metz

Transmitter module RTM08
USA/AUS
Manufacturers of mobile, fixed or portable
devices incorporating this module are
advised to clarify any regulatory questions
and to have their complete product tested
and approved for FCC compliance. Since
the module is not shielded, the module
grantee bears the responsibility for test
evaluation to ensure that the module is
compliant in the host device.
Model
1 2 3 4 5 6 7
Transmissioncode
GND
Transmission Activity
5 V DC (+)
6,0
Grid:
2.54 mm
RTM08E6008A01
In case PIN 3 receives a high a radiogram
according to the coding at PIN 4-7 is
transmitted.
Technical Details
Frequency:
Modulation:
Power supply:
Standby current:
Transmitting
current:
Transmission
range:
Operating
temperature:
Dimension:
916.50 MHz
FSK
5 V DC
max. 1,5 mA
Coding
Group
Transmission
code
max. 13 mA
approx. 100 m at optimal
free field conditions
-20 °C to +60 °C
40 x 22 x 5,8 mm
Intended Use
The transmitter module may only be used
to operate radio controls.
The manufacturer does not assume any
liability for damage caused as a result of
improper or non-intended use!
Safety Advice
Before connecting and operating
the transmitter module, carefully
read through the operating instructions!
Note also the operating instructions of the
radio control(s)!
Have faulty transmitter modules checked by
the manufacturer!
Do not make any unauthorized alterations or
modifications to the transmitter module!
Installation instruction
Manufacturers integrating the transmitter
module RTM08 into a host device may
affix an additional permanent label on their
host device referring to the enclosed module: “Contains Transmitter Module FCC ID
RZZRTM08916”.
The transmitter module is equipped with a
permanently attached antenna with is
soldered into the printed circuit board. To
meet the FCC’s RF exposure rules the
system antenna may not be co-located or
operating in conjunction with any other
antenna.
Dispose of the waste product via a
collection point for electronic scrap
or via your specialist dealer.
Put the packaging material into the
recycling bins for cardboard, paper
and plastics.
Function
The Transmitter Module RTM08 is a device designed for transmitting a maximum
of 16 different digital states. It is permanently under voltage.
The integrated micro controller carries out
all necessary important functions for the
transmission process. The maximal transmission time is 36 seconds.
916.50 MHz
Disposal
Waste electrical products should not be
disposed of with household waste!
Warranty
Within the statutory warranty period we
undertake to rectify free of charge by
repair or replacement any product defects
arising from material or production faults.
Any non-authorized alterations or modifications to the product shall render this
warranty null and void.
Conformity
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Customer Service
If, despite correct handling, faults or malfunctions occur or if the product was damaged, please contact your retailer or the
manufacturer.
ELDAT GmbH
Im Gewerbepark 14
15711 Königs Wusterhausen
Germany
Phone: + 49 (0) 33 75 / 90 37-0
Fax:
+ 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-Mail: info@eldat.de
0 = GND, 1 = nc
Start-Up
1. Connect the module as follows:
 Power Supply:
PIN1: 5 V DC
PIN2: GND
 Kanäle:
PIN4-7: transmission code
(see coding)
PIN 3: (High) transmission activity
Activate the transmission activity (PIN3) only after setting
the codings x, y, z, w (PIN4 to
PIN7).
2. Register the transmission code with
the radio control. Please read the operating instructions supplied with the
radio controls.
UM164043 0118 GB

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : de-DE
Tagged PDF                      : Yes
Title                           : Radio Control System  Rx868/2 · Rx433/2 · Rxw868/2 · Rxw433/2
Author                          : a.metz
Creator                         : Microsoft® Word 2013
Create Date                     : 2018:02:23 11:15:09+01:00
Modify Date                     : 2018:02:23 11:15:09+01:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools