ELECOM LBT-HP05 Bluetooth Stereo Headset User Manual LBT HP05 User s Manual
ELECOM CO,.LTD. Bluetooth Stereo Headset LBT HP05 User s Manual
ELECOM >
Manual
LBT-HP05 User’s Manual Content Brief introduction…………...…………………………..…...1 1. Bluetooth wireless communication technology……...……………..1 2. About LBT-HP05…………………………………………………...1 Before use……………………………………………………..2 1.Overview…………………………………………………………2 2. Charging for Headsets……………………………………………3 Using the headsets……………………………………………3 1. Turn on/off the headsets………………………………………………...3 2. Pairing headsets with Bluetooth devices……………………………….4 1) How to entering pairing mode……………………………………….4 2) Pairing headsets with Bluetooth devices…………………………….4 3) Pairing headsets with Bluetooth transmitter……………………….5 4) Pairing headsets with Multi-devices…………………………..…….6 3. Reconnect the headsets with devices…………………………………...6 4. Making calls with the headset………………………………………….7 5. Playing music……………………………………………………….…...9 6. LED indicator……………………………………………………….…..9 7. Indication tone………………………………………………………….10 Care and maintenance…………………………………...………..10 FAQs…………………………………………………………………..11 Specification…………………………………………………..……..12 Welcome to use this Bluetooth stereo headset, LBT-HP05. Please read this user’s manual carefully before use. Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba in May, 1998. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices. The max transmission range of class II is 10 meters while the max radio-communication range of class I can reach up to 100 meters. 2. About LBT-HP05 LBT-HP05 is a Bluetooth stereo headset. It support following Bluetooth profile: HSP —— Headset Profile HFP —— Hands-free Profile A2DP—— Advanced Audio Distribution Profile AVRCP——Audio/Video Remote Control Profile Profile HSP HFP A2DP AVRCP Description Headphone earpiece Related operation of phone call management Stereo music playback Remote control music(pause/play/previous track/next track) You can enjoy music wirelessly by using the LBT-HP05. Fetures as following: 1) Pairing with the Bluetooth mobile phone and PDA which support HFP. Answer, end and reject call from the headset Redial last number Voice dial Adjust the volume Switch the conversation between the headset and the mobile phone Microphone mute during conversation so that confidentiality with the third party conversation 2) Pairing with Bluetooth music devices and Bluetooth transmitter which support A2DP. Enjoy music wirelessly Adjust the volume Remote control pause/ play Remote control last/next song 3) Easy to switch between conversation and music, you will not miss the incoming call during listening to music. 4) Every time the headset is switched on, it will automatically connect to the last paired device. Note: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices. Before use 1.Overview Status indicator light Charging jack Built-in microphone Right speaker Left speaker Volume up/previous track Multifunction button Volume down/next track 2. Charging for Headsets First time charging: : Before you use this Bluetooth headset, please charge the battery of LBT-HP05 fully. Low power: : When you hear three “DONG” tones every 30 seconds, at the same time, the red LED blinks twice. It means the battery is low power and need to be charged. Charging method: Using USB cable charger: 1. Plug USB cable into USB port of PC 2. Plug another side of USB cable into charging port of the headset RED light on→ →Charging RED light off→ →Finish charging 3. It will take about two hours to finish charging Warning: 2) The battery is recyclable. 3) Do not dispose of the battery in fire, as it may cause explosion. Using the headsets 1.Turn on/off the headsets Function Operation Turn on Press multifunction button about 3~5seconds and release it till the blue light blinks Turn off Press multifunction button about 3~5seconds and release it till the red light blinks Indicator light Blue light on 1 second Red light on 1 second Note: The headset will turn off automatically if it can not connect any devices within 5 minutes after turn on so that it can save power. 2. Pairing headsets with Bluetooth devices 1) How to entering pairing mode Function Operation Enter mode pairing Make sure the headset is turned off, if not,please thrn it off first. Press multifunction button about 6~7seconds, and release it till blue light and red light blink alternately. Indicator light Blue light and Red light blink alternately. Note: Pairing mode will last 2 minutes, if the headset can not connect any other devices after 2 minutes, it will switch standby mode automatically. 2) Pairing headsets with Bluetooth devices Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: Please keep the headset and mobile phone within 1 meter when pairing Make the headsets enter pairing mode(please refer to “How to entering pairing mode” Activate your mobile phone’s Bluetooth function and search Bluetooth devices within available range, and select “LBT-HP05” from the list of devices shown after search According to the indication, enter password or PIN No: “0000”, and press “Yes” or “Confirm” button to confirm After pairing sucessfully, choose “LBT-HP05” from the list of device shown and connect it After connect sucessfully, headsets’s blue light blinks twice every 4 seconds or blinks three times every 4 seconds Note: If the pairing is not successful, please switch off headset firstly, and then re-pair according to the steps 1-6 mentioned above. After pairing is successful, the headset and the mobile phone will remember each other, they will no need to re-pair next time.The headset can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced. If you want to pair the headset with other devices, please pair it with the new device according to steps 1~6 mentioned above. 3) Pairing headset with Bluetooth transmitter You can pairing headset with Bluetooth transmitter to enjoy wirelessly music. Hereby take BTT001 (Bluetooth transmitter for iPod, not included) for example. The pairing steps are as follows: Keep the Bluetooth transmitter and the headset within 1 meter when pairing; Make the headset enter pairing mode (please refer to “How to enter pairing mode); Switch on the Bluetooth transmitter, it will search Bluetooth device automatically and start pairing; When the headset requests PIN No., the Bluetooth transmitter will respond “0000” automatically; After successful pairing and connecting, blue light of the headset blinks twice every 4 seconds. Note: The pairing password of the headset is “0000”. So, the headset can only pair with a Bluetooth transmitter whose pairing password is “0000”. If pairing still fails after several tries, please refer to the Bluetooth transmitter’s user’s manual for further information. 4) Pairing headset with Multi-devices The headset can connect with two devices at most. One is a Bluetooth mobile phone supporting HFP profile, the other one is a Bluetooth music device supporting A2DP profile. If you want to finish the multi-pairing, please refer to the following steps: Firstly, pair the headset with a Bluetooth transmitter (please refer to “pairing the headset with a Bluetooth transmitter); Switch off the Bluetooth transmitter; Pair and connect the headset with a Bluetooth mobile phone (please refer to “pairing the headset with a Bluetooth mobile phone”). Switch on the Bluetooth transmitter again, it will connect to the headset automatically. Notes: After successful pairing, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, they will no need to pair next time. If the pairing information is deleted, please connect the mobile phone with the headset first and then switch on the Bluetooth transmitter, multi-connecting can be performed. For the mobile phone supporting the HSP and A2DP at the same time. It may set up HSP and A2DP connection with the headset simultaneously. At this time, the Bluetooth transmitter may not connect to the headset. 3. Reconnect the headset with devices 1) Connect automatically After headset is opened, it will try to connect the last connected devices. 2) Artificial connect When the headset not connect HFP device, please double-click multi-function button, the headset will try to connect the last connected HFP devices. When the headset not connect A2DP device, please long press “―” for two seconds, the headsets will try to connect the last connected A2DP devices. Notes: Only the paired Bluetooth devices is opened and connected, the headsets is possible to connect to it sucessfully. For some devices, such as Nokia, you should set up allow devices connect automatically in your phone. 4. Making calls with the headset 1) Basic conversation operation Function Cancel call Status of the headset Calling mode Answer call Ringing Reject call Ringing End call Conversation mode Volume up Conversation mode Short press multifunction button one time Short press multifunction button one time Long press multifunction button for about 2 seconds and release it till you listen prompt tone Short press multifunction button one time Short press “+”button Volume down Conversation mode Short press “―”button Call transfer to mobile-phone Call transfer to earphone Microphone mute Cancel mute Conversation mode Long press multifunction button for 2 seconds Long press multifunction button for 2 seconds Short press multifunction button twice Short press multifunction button twice Voice dial Conversation mode Conversation mode Conversation mode(Microphone mute) Standby mode(have already connect with Operation Long press multifunction button for 2 seconds Redial number last Delete pairing list device) Standby mode(have already connect with device) Power off Short press multifunction button twice Press multifunction button and “+”button at the same time for 8 seconds and release it till blue light and red light on at the same time for 1.5 second 2) The operation of three-way call Function Status of the headset Answer new call and There are second end current call incoming call Answer new call and retain current call There are second incoming call Switch call Keep conversation End current call and switch retain call Keep conversation Operation Short press multifunction button one time Short press multifunction button twice Short press multifunction button twice Short press multifunction button one time Note: Not all the mobile phones support all the functions listed above. Please refer to your mobile phone user’s manual. Different function and prompt tone according to different mobile phone. When the volume is adjusted to max or min, you will hear a prompt tone. When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 5. Playing music When the headset connects to a mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly through the headset. Function Volume up Volume down Previous song Next song Pause play Status of the headset Palying music Palying music Palying music Palying music Palying music Pausing Operation Short press “+”button Short press “―”button Long press “+”button for 2 seconds Long press “―”button for 2 seconds Short press multifunction button Short press multifunction button Notes: When playing music on some mobile phones, the music will be transmitted to the mobile phone’s speaker instead of the headset. You have to select “transmit the sound via Bluetooth” in the settings menu and then choose “LBT-HP05” as speaker device. The music will be transmitted to the headset. Please refer to your mobile phone’s user’s manual for further information. When the volume is adjusted to max. or min., you will hear a prompt tone. If you want to remote control last/next song, pause/play, it needs your Bluetooth mobile phone or Bluetooth transmitter paird with the headset to support AVRCP profile, please refer to the user’s manual of your mobile phone or Bluetooth transmitter for further information. 6. LED indicator 1) Charging LED indicator Red light on Red light off Status of the headset Charging Finish charging 2) Pairing with the Bluetooth device LED indicator Red and blue light blink alternately Status of the headset Pairing mode Blue light quick blink one time every 2 seconds Blue light quick blink twice every 4 seconds Blue light quick blink three times every 4 seconds Blue light quick blink continuously Not connected to a device Blue light quick blink one time every 4 seconds Red light quick blink twice every 30 seconds Conversation mode 7. Indication tone Indication tone Continuous two indication tone every 5 seconds Three “dong” warning tone every 30 seconds Connected HFP or A2DP profile Connected HFP and A2DP profile at the same time Calling/incoming call Low battery Status of the headset Conversation mode microphone mute Low battery and Care and maintenance Read the following recommendations carefully before using LBT-HP05. Following these you will be able to enjoy this product for many years. Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected. Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. Don’t expose the product to cold areas. It may damage the internal circuit board. Don’t try to disassemble the product as it may get damaged if you are not professional. Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged. Don’t use intensive chemical products or detergent to clean the product. Don’t scratch the surface with sharp things. In case the product doesn’t function properly, send it to the store you bought 10 it. The staff will help you to solve the problem FAQs 1. What does it mean when red LED blink twice every 30 seconds? Battery is low power, need to be recharged. 2. Why is the red LED off when charging? a) Please make sure the charging device connect with headset Well; b) You didn’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be ON. 3. How far is the effective rang between the headset and mobile phone? According to the Bluetooth standard, the max. available range of ClassII headset is 10 meters. It varies under different environment. 4. Why my mobile phone can not search and find the headset? The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5. a) b) c) d) Why can not hear the voice? Make sure the headset has been switched on; Make sure the volume is not too low or muted; Make sure the headset connects with the mobile phone correctly; Make sure the distance between the headset and the cell phone is in the available Bluetooth range. 6. Why is the voice not clear in conversation? a) Make sure the mobile phone is in the strong signal area; b) Make sure the headset is in the available range of this product. 7. Why can’t control pause, play, last song and next song when playing music? This function needs your Bluetooth device supports AVRCP(Audio/Video Remote Control profile) 11 Specifications Bluetooth version Bluetooth profiles Operating distance Headset working time Headset standby time Charging input Headset charging time Dimension Weight Bluetooth V2.1+EDR Headset, Handsfree, A2DP, AVRCP 10meters Music up to 3 hours Approx 134 hours DC5.0V 65mA Approx 2 hours 30*17*7.8mm Approx 12g Notes: 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 13 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 75ca9013-7584-11e1-0000-859c102dd955 Producer : GPL Ghostscript 8.70 Keywords : () Modify Date : 2012:03:21 15:39:07+08:00 Create Date : 2012:03:21 15:39:07+08:00 Creator Tool : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0001\000.\0000\000.\0002 Document ID : 75ca9013-7584-11e1-0000-859c102dd955 Format : application/pdf Title : \376\377\000L\000B\000T\000-\000H\000P\0000\0005\000 \000U\000s\000e\000r\000'\000s\000 \000M\000a\000n\000u\000a\000l Creator : \376\377\000l\000i\000n\000s\000a\000m Description : () Author : linsam Subject :EXIF Metadata provided by EXIF.tools