ELECOM TK-FBP019E Bluetooth keyboard for smartphone User Manual

ELECOM CO,.LTD. Bluetooth keyboard for smartphone

user manual

Folding Bluetooth® KeyboardTK-FBP019E SeriesUser's ManualThank you for purchasing the ELECOM Folding Bluetooth® Keyboard.This product employs an English keyboard layout and Bluetooth® wireless technology.This manual describes the operating instructions and safety precautions for using this product. Ensure that you have read this manual before using the product. After reading this manual, store it somewhere safe for future reference.* Except in certain cases, the TK-FBP019E Series is referred to as “this product” in this manual.Meaning of symbols  WARNING Failure to observe precautions may result in serious personal injury or death due to fire, electric shock, or other causes. CAUTION Failure to observe precautions may result in personal injury due to electric shock or other causes, and may damage other equipment.Prohibited actionMandatory actionSituation that needs attentionNotes and reference informationSafety PrecautionsObserve these precautions carefully to avoid personal injury, damage, fire, and other problems. WARNINGIf a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product and remove the batteries from the keyboard. If you continue to use the product under these conditions, it may cause a fire or electric shock.If an abnormality is found with this product (emission of heat, smoke or abnormal smell from the product), immediately stop using the product, shut down connected devices, and after thoroughly checking that heat from the product will not cause burns, remove the batteries from the keyboard. After doing this, contact the retailer from whom you purchased the product. If you continue to use the product under these conditions, it may cause a fire or electric shock.Cautions for Wireless EquipmentThis product is wireless equipment using the entire range of the 2.4 GHz band and it is pos-sible to avoid the band of mobile object iden-tification systems. FH-SS is used for the radio wave method. The interference distance is 10 m.The 2.4 GHz band is also used by medical equipment, and wire-less LAN equipment conforming to the IEEE 802.11b/11g/11n standard.Before using this product, check that there are no other •“radio stations”* operating nearby.If electromagnetic interference occurs between this product •and other “radio stations”, move this product to another location or stop using this product.* Other “radio stations” refer to industrial, scientific and medical devices using the 2.4 GHz band like this product, other radio stations of this type, licensed radio station premises for mobile object identification system that is used in factory production lines, certain non-licensed low power radio stations and amateur radio stations. WARNINGDo not use this product with any device that may •have a serious impact in the event of a malfunction. There are rare cases where an external radio wave at the same frequency or the radio wave emitted from a mobile phone causes this product to malfunction, slow down, or fail to operate.Do not use this product in a hospital or other loca- •tions where the use of radio waves is prohibited. The radio waves of this product may affect electronic and medical devices (e.g. pacemaker).The use of a wireless keyboard in an aircraft is pro- •hibited by aviation law because doing so may inter-fere with flight safety. Turn off the keyboard before boarding an aircraft and do not use it in the aircraft.* ELECOM is not liable for any accident or social damages incurred by the failure of this product.Package ContentsThis product’s packaging contains the items listed below. Before using the product, check that all items are present. Keyboard x1 • AAA alkaline battery x2 •Storage case x1 •User’s Manual x1 • WARNINGDo not drop or hit this product.If this product is damaged, immediately stop using it, turn it off, and remove the batteries.If you continue to use the product in a damaged condition, it may cause a fire or electric shock.Do not attempt to disassemble, modify or repair this product by yourself. Doing so may cause a fire, electric shock, or product damage and may void the warranty.Do not put this product in fire, as the product may burst, resulting in a fire or injury. CAUTIONDo not place this product in any of the following environments:In a car exposed to sunlight, a place exposed to •direct sunlight, or a place that becomes hot (around a heater, etc.)In a moist place or a place where condensation may •occurIn an uneven place or a place exposed to vibration •In a place where a magnetic field is generated (near a •magnet, etc.)In a dusty place •This product does not have a waterproof structure. Use and store this product in a place where the product body will not be splashed with water or other liquid.Rain, water mist, juice, coffee, steam or sweat may also cause product damage.Do not use this product with any device that may have a serious impact in the event this product fails.Batteries  CAUTIONUse AAA alkaline batteries, AAA manganese batteries, or rechargeable AAA nickel hydride batteries with this product.If this product will be unused for a long period of time, remove the batteries to avoid battery leakage and failure.Cleaning the Keyboard If the product becomes dirty, wipe it with a soft, dry cloth.Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material quality and color of the product.Part NamesInstalling/Replacing the BatteriesBefore using this product, install two AAA batteries in the keyboard. Remove the battery compartment cover. Insert the batteries.Basic Instructions Open the keyboard.Before using this product for the first time, you must install the batteries. Refer to “Installing/Replacing the Batteries” for detailed instructions. Turning on the keyboardPower switchSlide the power switch to the ON position.The connection indicator lamp flashes green for about 25 seconds. Enter text from the keyboard.Make sure that the polarity is correct. •Do not mix different types of batteries or use •old batteries with new batteries to avoid bat-tery leakage and failure. Install the battery compartment cover.Power SwitchTurn on the keyboard to use it.Slide the power switch to the ON position.The connection indicator lamp flashes green for about 25 seconds.When not using the product, turn the keyboard off to save battery power.Slide the power switch to the OFF position. Pair the keyboard.Bluetooth® buttonPress the Bluetooth® button to pair this product with the connected device.For detailed instructions on the pairing procedure, refer to “Pairing the Keyboard with a Connected Device”.To use this product the connected device must support the Bluetooth HID profile or have a Bluetooth adapter that supports the HID profile connected.Pairing the Keyboard with a Connected DeviceUsing iPhone/iPad/iPod touchTo connect this product to a connected device using Bluetooth, you need to pair the product with the connected device.Pairing involves registering Bluetooth devices (in this case, this product and iPhone/iPad/iPod touch) with each other, •and authorizing a connection with a registered device.This product supports multi-pairing, which allows simultaneous connection with multiple Bluetooth devices. (Maximum of three) •Second and third devices can be paired by registering each device and then performing the same pairing procedure.* If the pairing procedure is performed when three devices have already been registered, settings for the device that was first paired are deleted.The instructions below are based on iPhone 4 (iOS 5.1) user * interface. The procedure is the same for other models.When using iPhone 3GS or 3G iPod touch, you must update * the software to iOS 4.0 or later.For instructions on updating software, refer to iPhone 3GS or 3G iPod touch manual.This product cannot be used with iPhone 3G or with first and * second generation iPod touch. Touch [Settings]. Touch [General]. Touch [Bluetooth]. While the device is searching for other devices, press the Bluetooth® button on this product.The connection indicator lamp flashes green during the pairing procedure and turns off when the procedure is complete (step ). Touch [Elecom Foldable Blue-tooth Keyboard Not Paired].If iPhone 3GS or iPod touch cannot find the keyboard, check that the software has been updated to iOS 4.0 or later. Product connection starts.Bluetooth® button Use this product to enter the PIN code that displays on the screen.Enter the PIN code using the keyboard numerical keys, and press the “Enter” key.If the PIN code was not entered correctly, the screen shown to the right will display.Touch “OK”, and repeat from step . Pairing is completed successfully when [Elecom Foldable Bluetooth Keyboard] is shown as [Connected].You can now use the keyboard.If connection failsConnection may fail depending on iPad/iPhone/iPod touch status.In such cases, re-connect by following the procedure below. Touch [Settings]. Touch [General]. Touch [Bluetooth]. Touch [Elecom Foldable Bluetooth Keyboard Not Connected]. Reconnection is completed successfully when [Elecom Foldable Bluetooth Key-board] is shown as [Con-nected].TroubleshootingWhen the keyboard does not work cor-rectlyWhen text cannot be entered or keyboard does not work/is unstableCheck that this product and the connected device’s Bluetooth function or Bluetooth adapter are turned on.Check pairing status to ensure that this product is paired correctly with the connected device and that pairing has not been cancelled.The connection indicator lamp flashes green during the pairing procedure and turns off when the procedure is complete.The connected device and the keyboard are too far apart or there is a possibility that the connected device is facing in a direction from which it cannot receive radio signals.Adjust the position of the connected device.The operable range of this product is the area within a circle with a radius of 10 m from the connected device. Depending on the usage environment, the keyboard may not operate even when it is within approximately 10 m of the connected device. In such cases, move the keyboardcloser to the connected device until operation stabilizes.When using this product on a metallic surface such as a steel desk, radio wave outreach may be shortened. In such cases, move the keyboard closer to the connected device until keyboard operation stabilizes.Interference may occur if multiple units of this product are used together or if this product is used with other wireless devices. In this case, change the channel of other wireless devices.Operation becomes unstable when battery power is low. Refer to “Installing/Replacing the Batteries” on the reverse of this sheet, and replace the batteries as soon as possible.The alkaline batteries supplied with this product are for •checking product operation. These batteries may dis-charge and drain during storing and shipping.When the remaining battery level gets low, the connec- •tion indicator lamp turns red.* When not using the product, turn the keyboard off to save battery power.Approx. 10 mBasic SpecificationsProduct name Folding Bluetooth® KeyboardArticle No. TK-FBP019E seriesSupported devices iPad2, iPad, iPhone 4, 4G iPod touch iPhone 3GS and 3G iPod touch (32GB/64GB) with software updated to iOS 4.0 or later* Cannot be used with iPhone 3G or first and second generation iPod touch.Connection method Bluetooth® wirelessCompliant standard Bluetooth® v2.0 Class 2Profile HID (Human Interface Device)Radio frequency 2.4 GHz bandwidthRadio wave method FH-SS modulationRadio wave outreach Non-magnetic substance (e.g. wooden desk): Approx. 10 mMagnetic substance (e.g. metal desk): Approx. 3 m* Values indicated are those obtained by ELECOM and are not guaranteed.No. of keys 65 (English layout)Key type PantographKey pitch 18.0 mmKey stroke 2.3 mmDimensions285.6 (W) x 99.3 (D) x 14.1 (H) mm (when unfolded)146.2 (W) x 99.3 (D) x 21.9 (H) mm (when folded)Weight 165 g * Not including batteriesOperating temperature/humidity5 to 40°C, 90% RH max. (no condensation)Storing temperature/humidity-10 to 60°C, 90% RH max. (no condensation)Batteries x2 AAA alkaline/manganese/rechargeable nickel hydride batteriesOperating time Measure of operating time when alkaline battery is usedApprox. 3 months* Values indicated are those obtained by ELECOM and are not guaranteed.Folding Bluetooth® KeyboardTK-FBP019E series User’s Manual1st edition, December 20, 2011ELECOM Co., Ltd.This manual is copyright of ELECOM Co., Ltd. •Unauthorized copying and/or reproducing of all or part of this •manual is prohibited.The specifications and appearance of this product may be •changed without prior notice for product improvement purposes.ELECOM Co., Ltd. shall bear no responsibility for any and all affects •resulting from the use of this product regardless of the above reasons.Export or service transaction permission under the Foreign •Exchange and Foreign Trade Control Law is required in order to export this product or parts of this product that constitute strategic materials or services.iPad, iPhone, and iPod touch are trademarks of Apple Inc. •The Bluetooth •® wordmark and logo are registered trademarks owned by Bluetooth® SIG,Inc. ELECOM CO.,LTD. has obtained permission to use these trademarks.Company names, product names, and other names in this •manual are generally trademarks or registered trademarks.©2011 ELECOM Co., Ltd. All Rights Reserved. Change the character input method by pressing “Com-mand” and the space bar.Enter an underscore (_) character by pressing [Shift] + .While the key is held down, the functions indicated in the on the bottom of other keys can be used. key (Function key)Inserts a space. •Converts characters when •using two-byte fonts.Space barPower switchOpen and close buttonBattery compartmentLocks the keyboard in an open position when slid to the right. Unlocks the keyboard when slid to the left, allowing the keyboard to be closed after use.Lock buttonFlashes green when the keyboard is in a pairing standby •state. Indicates when to replace the batteries. •Turns red when the remaining battery level gets low.Connection indicator lampStores the stand.Pull the stand out to use it.The stand can be stored in the compartment when not in use.* The stand cannot be used with large-size devices such as iPad.Stand storage compartmentBluetooth® buttonInserts a space. •Converts characters when using two-byte characters. •Space barELECOM CO., LTD.1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765URL: http://www.elecom.co.jp/global/overseas@elecom.co.jp宜麗客（上海）貿易有限公司上海市徐匯区肇嘉浜路 1065 甲号飛雕国際大厦 704 号電話 : 86-21-33680011FAX : 86-21-64271706URL : http://www.elecom-china.com/ELECOM Korea Co., Ltd.5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, KoreaTEL : 1588-9514FAX : (02)3472-5533URL : www.elecom.co.krELECOM Singapore Pte. Ltd33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868)TEL : (65)-6347-7747FAX : (65)-6753-1791ELECOM India Pvt. Ltd.408-Deepali Building, 92- Nehru Place, New Delhi-110 019, IndiaTEL: 011-40574543e-mail: support@elecom-india.comURL: http://www.elecom-india.com/Hereby, ELECOM Co., Ltd., declares that this product is in compliance with the essential requirements and other relevant provisions of Directive [2004/108/EC] , [1999 /5/EC] and [2006/95/EC].The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Notice: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Any changes or modifications not expressly approved by ELECOM responsible for compliance could void the user's authority to operate the equipment.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.- 1 -

Navigation menu