ELITEGROUP COMPUTER SYSTEMS G335IABG Notebook User Manual 335 e v1 0

Download:
Mirror Download [FCC.gov]
Document ID	628272
Application ID	i2i3KlUqzkrW+lC2PVWRpg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	185.68kB (2321024 bits)
Date Submitted	2006-02-13 00:00:00
Date Available	2006-02-13 00:00:00
Creation Date	2006-02-10 18:00:10
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	2006-02-13 10:35:27
Document Title	335 _e_v1.0.doc
Document Creator	335 (e)v1.0 - Microsoft Word
Document Author:	Cathy

Preface
 Copyright 2005
All Rights Reserved.
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does not
represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to
use the product or documentation, even if advised of the possibility of
such damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
AutoCAD and Autoshade are trademarks of Autodesk, Inc. IBM, OS/2,
and VGA are trademarks of International Business Machines Corp. Lotus,
1-2-3, and Symphony are trademarks of Lotus Development Corp.
Windows, Word, MS-DOS, and Microsoft are trademarks of Microsoft
Corp. VESA is a trademark of Video Electronics Standards Association.
Other product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of
their respective companies.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this
manual, the manufacturer and distributor assume no liability resulting
from errors or omissions in this manual, or from the use of the
information contained herein.
Notices
Federal Communications Commission Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in accordance with
the instruction manual may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
•
Consult the dealer or an experienced radio TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
IMPORTANT NOTE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body. If this
device is going to be operated in 5.15 ~ 5.25GHz frequency range, then it is
restricted in indoor environment only.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
ECS declares that the US model of G335 (FCC ID: SA6G335IABG) is limited in
2412~2462MHz by specified firmware controlled in the USA.
ii
EC DECLARATION OF CONFORMITY (EUROPE)
Hereby, Elitegroup, declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC
as listed below
Article 3.1(a): EN 60950, EN50392
Article 3.1(b): EN 301 489-1, EN 301 489-17
Article 3.2: EN 300 328, EN 301 893
0976
Caution:
This equipment is intended to be used in all EU and EFTA countries. Outdoor
use may be restricted to certain frequencies and/or may require a license
for operation. Contact local Authority for procedure to follow. Note:
Combinations of power levels and antennas resulting in a radiated power
level of above 100 mW equivalent isotropic radiated power (EIRP) are
considered as not compliant with the above mentioned directive and are
not allowed for use within the European community and countries that have
adopted the European R&TTE directive 1999/5/EC.
EUROPE – RESTRICTIONS FOR USE OF 5GHZ
FREQUENCIES IN EUROPEAN COMMUNITY COUNTRIES
Regulatory statement (R&TTE / WLAN IEEE 802.11abg)
Operation of this device is subjected to the following recommended
National regulations and may be prohibited to use if certain restriction
should be applied, please check local regulatory authority for the most
updated info before operating the device.
National Restrictions
Data based on ERC RECOMMENDATION 70-03 (November 2005).
2400-2483.5 MHz
Country
Restriction
Bulgaria
France
Italy
Reason / remark
General authorization required for
outdoor use and public service
Outdoor use limited
to 10 mW e.i.r.p.
within the band
2454-2483.5 MHz
If used outside of own premises, general
authorization is required
iii
Luxembourg
None
Romania
On a secondary
basis. Individual
license required.
T/R 22-06 not
implemented
5150-5250 MHz
Belgium
Not implemented
Bulgaria
Not implemented
Croatia
License required
Cyprus
Not implemented
Germany
Not implemented
Greece
Not implemented
Italy
Liechtenstein
Luxembourg
Not implemented
None
Portugal
Romania
Slovak
Republic
Spain
Not implemented
Not implemented
Not implemented
Planned
Under study
General authorization required if used
outside own premises
General authorization required for public
service
Not implemented
5250-5350 MHz
Belgium
Not implemented
Bulgaria
Not implemented
Croatia
License required
Cyprus
Not implemented
Germany
Not implemented
Greece
Not implemented
Italy
Liechtenstein
Luxembourg
Not implemented
None
Portugal
Romania
Slovak
Republic
Spain
Not implemented
Not implemented
Not implemented
iv
General authorization required for public
service
Not implemented
Planned
Under study
General authorization required if used
outside own premises
General authorization required for
public service
Notice:
Changes or modifications not expressly approved by the party respons ible
for compliance could void the user’s authority to operate the equipment.
Shielded interface cables and a non-shielded AC power cord must be used
in order to comply with emission limits.
This equipment is to be used with power supply:
Input: 100-240V AC, 50-60Hz, Universal
Output: 19V DC, 3.42A, 65W
There is no internal power supply.
Table of Content
Before you Start------------------------------------------------------------ 1
Conventions of This Manual ...................................................................... 1
Regulatory Statement Sample.................................................................... 錯
誤! 尚未定義書籤。
Safety Precautions ....................................................................................... 2
Wichtige Sicherheitshinweise.................................................................... 4
Things you must remember before working on your computer............ 6
Introduction ----------------------------------------------------------------- 9
Welcome to the Notebook PC ................................................................... 9
Getting Started ------------------------------------------------------------- 15
Connecting to a Power Source................................................................... 15
Using the Notebook Computer ----------------------------------------- 19
The CD-ROM/DVD-ROM/Combo ........................................................... 22
Power Saving Modes .................................................................................. 24
Desktop Operation -------------------------------------------------------- 29
Connecting Peripheral Devices ................................................................. 31
Internet Connection (Optional) ---------------------------------------- 33
Using Both DHCP and Static IP for Connection to Internet ................. 36
Using Wireless LAN Network for Connection to Internet (Microsoft’s
Service Pack 2) (Optional) ......................................................................... 38
Running BIOS Setup ------------------------------------------------------ 39
Introduction .................................................................................................. 39
VGA Utilities ----------------------------------------------------------------- 47
Overlay Settings .......................................................................................... 49
Launch Zoom ............................................................................................... 50
Display Devices ........................................................................................... 51
Display Settings ........................................................................................... 52
Color Correction.......................................................................................... 53
Hot Keys ....................................................................................................... 54
Troubleshooting------------------------------------------------------------ 57
Locating a Problem ..................................................................................... 57
Upgrading your System-------------------------------------------------- 61
Upgrading your System CPU..................................................................... 62
Upgrading your Memory (1)...................................................................... 63
Upgrading your Memory (2)...................................................................... 63
vi
The Easy to Upgrade HDD Module.......................................................... 64
Specification ---------------------------------------------------------------- 65
Detailed Notebook Specifications ............................................................. 65
vii
Canadian DOC Notice For Class B Computing Devices
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Cet appareil numerique de la classe B repecte toutes les exigences du
Règlement sur le matèriel brouilleur du Canada.
Personal Inventory
This Notebook computer system is designed for years of productive and
pleasurable computing. Use this section to keep notes about details of
your purchase. Update this section when you add new options.
Date of Purchase:
Dealer’s Name:
Phone:
Address:
E-Mail Address:
WWW Site:
Serial Number:
CPU Type:
Hard Disk Capacity:
Memory Capacity:
Optional Equipment:
viii
BEFORE YOU START
Conventions of This Manual
Use this manual will help you get the most from your notebook computer.
• If you are an experienced user of computers and/or Microsoft’s
Windows operating systems, you might find it useful to read the
Quick Start Guide that comes along with your accessories.
• If you are a less experienced user, you should through the manual
carefully before using your system.
Whether or not you are an experienced user, you should consult on the
Troubleshooting Chapter if you encounter any problems with your
notebook.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Safety Precautions
This section is designed to assist you in identifying potentially unsafe
conditions while working with this product. Required safety features have
been installed in the computer to protect you from injury. However, you
should use good judgment to identify potential safety hazards:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Please read these safety instructions carefully.
Please keep this User's Manual for later reference.
Please disconnect this equipment from AC outlet before cleaning.
Don't use liquid or sprayed detergent for cleaning. Use moisture
sheet or cloth for cleaning.
For pluggable equipment, that the socket-outlet shall be installed
near the equipment and shall be easily accessible.
Please keep this equipment from humidity.
Lay this equipment on a reliable surface when installed. A drop or
fall could cause injury.
Make sure to use the right voltage for the power source when
connecting the equipment to the power outlet.
Place the power cord in such a way that people can not step on it.
Do not place anything on top of the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not use for a long time, disconnect the equipment
from the main power outlet to avoid being damaged by transient
overvoltage.
Never pour any liquid into the opening, this could cause fire or
electrical shock.
Never open the equipment. For safety reason, the equipment should
only be opened by a qualified service personnel.
If on the following situations arises, get the equipment checked by a
service personnel:
a. The Power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment has not worked well or you cannot get it work
according to the user's manual.
e. The equipment has dropped and damaged.
f. If the equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned,
storage temperature above 60°C (140°f), it may damage the
equipment.
The unit can be operated at an ambient temperature of max. 35°C.
16. The sound pressure level at the operators position according to IEC
704-1: 1982 is equal or less than 70 dB(A).
17. Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor, whether
it is 100-120 or 200-240 Vac. The following information explains
the requirements for power cord set selection.
Ø The cord set must be approved for the country in which
it is used.
Ø The appliance coupler must have a configuration for
mating with a CEE22/EN6032/IEC 320 appliance inlet.
A. For U.S. and Canada:
Ø The cord set must be UL Listed and CSA Certified.
Ø The minimum specifications for the flexible cord are
No. 18 AWG.
B. For Japan:
Ø All components of the cord set must bear a “PSE” or
“ T ” mark and registration number in accordance with
the Japanese Dentori Law.
Ø The minimum specifications for the flexible cord
are .75m ㎡ conductors.
C. For Other Countries:
Ø The cord set fittings must bear the certification mark of
the agency responsible for evaluation in a specific
country.
Ø The flexible cord must be of a HAR (harmonized) type
H03VV-F.
Ø The cord set must have a current capacity of a least 2.5
Amperes and voltage rating of 125 or 250 Vac.
18. When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons. These precautions includes the following:
Ø Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink or laundry tub, in a
wet basement or near a swi mming pool.
Ø Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.
Ø Do not use the telephone to report a gas leak in the
vicinity of the leak.
Ø Use only the power cord indicated in this manual.
19. Do not use the AC adapter near open water or other liquids. Never
spill liquid into the AC adapter.
20. Laser Warning: Laser Class I Product Caution - Invisible laser
radiation when open avoid exposure to beam.
21. Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's
instructions. Never remove the battery pack while the power is on as
this may result in data loss when the system loses power.
22. The input receptacle is used as the main disconnecting device.
Wichtige Sicherheitshinweise
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Bitte lesen Sie diese Hinweis sorgfältig durch.
Heben Sie dirse Anleitung für den späteren Gebrauch auf.
Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.
Versenden Sie Keine Flüssig- oder Aerosolreiniger. Am besten
eignet sich ein angefeuchtetes Tuch zur Reinigung.
Die Netzanschlußsteckdose soll nahe dem Gerät angebracht und
leicht zugänglich sein.
Das Gerät ist vor Feuchtigkeit zu schützen.
Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.
Ein Kippen oder Fallen könnte Beschädigungen hervorrufen.
Beachten Sie beim Anschluß an das Stromnet die Anschlußwerte.
Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen
kann. Es sollte auch nichts auf der Leitun abgestellt werden.
Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu
beachten.
Wird das Gerät üeinen längeren Zeitraum nicht benutzt, sollten Sie
es vom Stromnetz trennen. Somit wird im Falle einer Überspannung
eine Beschädigung vermieden.
Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder
Flüssigkeien in das Gerät gelangen. Dies könne einen Brand bzw.
Elektrischen Schlag auslösen.
Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der
elektrischen Sicherheit nur von authorisiertem Servicepersonal
geöffnet werden.
Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu
trennen und von einer qualifizierten Servicestelle zu Überprüfung.:
a. Netzlabel oder Netzstecker sind beschädigt.
b. Flüssigkeit ist in das Gerät eingedrungen.
c. Das Gerät war Feuchtigkeit ausgesetzt.
d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend
14.
15.
16.
17.
funktioniert oder Sie mit Hilfe dieser Anleitung keine
Verbesserung erzielen.
e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
VORSICHT: Explosiongsgetahr bei unsachgemäßen Austausch der
Batterie. Ersatz nur durch denselben oder einem vom Hersteller
empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien
nach Angaben des Herstellers.
Dieses Schaltnetzteil kann bis zu einer Außentemperatur von
maximal 35ºC.
Die Ausgangswerte dürfen nicht die auf dem Label angegebenen
Werte überschreiten.
Anforderungen an das Stromkabel
Das Kabel-Set, das an das Netzteil angeschlossen wird, muss den
Anforderungen des Landes, in dem Sie das Netzteil einsetzen,
genügen, je nachdem, ob die Netzspannung 100-120 oder 200-240V
Wechselspannung beträgt.
Ø Das Kabel-Set muss für das Land, in dem es eingesetzt
wird, zugelassen sein.
Ø Der Gerätestecker des Kabels muss in eine CEE22/
EN603/IEC 320 Buchse passen.
A. Für die USA und Kanada:
Ø Das Kabel-Set muss UL-gelistet und CSA zertifiziert
sein.
Ø Die Minimalanforderungen für das Kabel entsprechen
No. 18 AWG.
B. Für Japan:
Ø Alle Teile des Kabel-Sets müssen entsprechend dem
japanischen Dentori Law mit einem „PSE“ or „T”Symbol markiert sein
Ø Die Minimalanforderungen für das Kabel sind .75m ㎡
Leiter.
C. Für andere Länder:
Ø Die Zubehörteile des Kabel-Sets müssen das Prüfsiegel
derjenigen Stelle, die in dem jeweiligen Land für die
Sicherheitsprüfung zuständig ist, tragen.
Ø Das Kabel muss vom HAR (harmonisierten) Typ
H03VV-F sein.
Ø Das Kabel-Set muss eine Stromkapazität von
mindestens 2,5 Ampere haben und Spannungen von
125 oder 250 V Wechselstrom gestatten.
18. Bei der Benutzung Ihres Telefongerätes sollten Sie immer die
grundlegenden Sicherheitsmaßnahmen beachten, um das Risiko von
Feuer, Stromschlägen und Verletzungen zu minimieren. Zu beachten
sind u.a. folgende Punkte:
Ø Benutzen Sie das Gerät nicht in der Nähe von Wasser,
wie zum Beispiel Badewanne, Waschbecken,
Spülbecken, Waschbottich, in feuchten Kellerräumen
oder in der Nähe von Schwimmbecken.
Ø Benutzen Sie kein Telefon (ausgenommen schnurlose
Modelle) während eines Gewitters. Es besteht das
geringe Restrisiko eines Blitzschlages.
Ø Benutzen Sie das Telefon nicht um ein Gasleck zu
melden, falls es sich in der Nähe des Lecks befindet.
Ø Benutzen Sie nur solch ein Stromkabel, wie in dieser
Anleitung beschrieben.
19. Benutzen Sie das Netzteil nicht in unmittelbarer Nähe zu Wasser
oder anderen Flüssigkeiten. Gießen Sie nie Flüssigkeiten über das
Netzteil.
20. Achtung Laser: Laser Produkt der Klasse I. Achtung - Unsichtbarer
Laserstrahl, vermeiden Sie Kontakt mit dem Strahl bei offenem
Gehäuse.
21. Es besteht Explosionsgefahr, wenn der Akku nicht ordnungsgemäß
ersetzt wird. Ersetzen Sie den Akku nur durch einen Akku gleichen
oder äquivalenten Typs, der vom Hersteller empfohlen wird.
Entsorgen Sie Akkus entsprechend den Anweisungen des Herstellers.
Entfernen Sie den Akku auf keinen Fall bei eingeschaltetem
Notebook, da hierdurch Daten verloren gehen könnten.
22. Der Netzeingabeanschluss dient als Hauptschalter des Geräts.
Things you must remember before working on your
computer
Let your computer acclimate itself
Your notebook can easily stand temperature extremes but it doesn’t like
rapid changes in temperature, like going from the cold outdoors to a
warm office. Rapid changes in temperature can cause water droplets to
condense inside your case, threatening to damage the electronic parts
inside.
After receiving your notebook when it’s hot or cold outside, try not to
power up the computer immediately, let the computer adjust to the room
temperature gradually at least for three to four hours.
If your system arrives in cold weather, do not apply power to the
computer or monitor until they have been allowed to come to room
temperature.
Heat, Cold, Humidity, and Glare
Find a suitable place for your computer that’s not too hot, too cold, too
dark, or too bright. Glare can make it hard to read the screen.
• Try to avoid the computer components from being destroyed if it is
over heated, so try to allow plenty of room for air to circulate around
the case.
• Do not block the ventilation opening.
• Do not place your computer in direct sunlight.
Suitable place to work
Your computer will run well wherever you’re comfortable but extremes
of temperature and humidity can be challenging to your system’s parts.
There are some things you can tolerate that the computer can’t – things
like static electricity, dust, water, steam and oil. In case you decide to pull
over for roadside computing, try to choose a clean, comfortable work area
for your system.
A lithium-ion battery pack will be available when you are traveling. If
you are running your system for the first time on battery power, remove
the battery from the package, install it into the system and recharge the
battery to fully prepare for service.
INTRODUCTION
Welcome to the Notebook PC
Congratulations on your purchase of the Notebook PC. Your Notebook
features the latest advances in portable computing technology. The
Notebook’s modular design provides maximum expandability without
compromising portability. The high-performance CPU and enhanced IDE
hard drive provides you with extra processing power for handling
complex graphics and running large programs.
Getting to Know Your Computer
Opening the LCD Panel
At the front of the Notebook you will find a retaining latch on the display
panel that locks the display in closed position when the Notebook is not
in use.
To avoid damage to the display panel:
1. Try not to slam the display upon closing it.
2. Try not to place any object on top when it is closed or open.
3. Be sure the system is turned off or in suspend mode before you
close the display panel.
With the LCD screen open, you will see several features important for
operating your Notebook computer.
Each of these features is briefly described below.
1. LCD Display
This LCD panel can only support up to a maximum opening of 130
degrees, please do not push it forcibly.
2.
3.
4.
10
Power/Resume Button
Wireless LAN Button
Internet Explorer Button
5.
6.
Outlook Express Button
System Status Indicator Panel
Wireless Connection
Indicates when the system LAN is functioning
LED ON – Ready to transfer and receive
Fast Blink – Transferring and receiving, it will return to
normal light after the operation
HDD
Indicates that the computer is accessing the hard disk
drive.
Numeric Lock
Indicates that the keyboard is in Num Lock mode.
Caps Lock
Indicates when the keyboard is in Caps Lock mode. In
this mode, the keyboard produces uppercase text when
you press a key. When you press the Caps Lock key
again, the indicator goes off and the keyboard produces
lowercase text.
Scroll Lock
Indicates when the keyboard is in Scroll Lock mode.
Some applications will move information across the screen
differently whe n Scroll Lock is on.
7. The Built-in Microphone
8. TouchPad Buttons
9. TouchPad
The Front
1.
2.
3.
Infrared Remote Control
LCD Cover Release Latch
The CD-ROM/DVD-ROM or DVD CD-RW Combo
11
The Left Side
1. Ventilation Opening
2. Speaker
The Right Side
1. Speaker
2. CardReader (Optional)
3. USB Ports
LED Indicators
These three LED indicators are
separately program for the
following functions: Power On,
Suspend Mode and Battery
Charge.
1. Battery Charge
This indicator will lit green
when the battery is in
charging status. When the
indicator light turns off, it
indicates the system is in
full charge.
2. Suspend Mode
This indicator will lit when the notebook enter the suspend mode.
3. Power On
This indicator will lit when the notebook is powered On.
12
The Rear
1.
Cable TV Input (Option)
Before connecting the cable into the connector, be sure to remove
first the cover on the TV connector (internal TV card) at the rear of
the computer with the aid of a screw driver.
2.
The LAN Port
When using a LAN, please use an EMI Shielding Cable to minimize
inteference when transmitting.
3.
The Modem Port
Always disconnect all telephone lines from the wall outlet before
servicing or disassembling this equipment. To reduce the risk of fire
use only No. 26 AWG or larger telecommunication line cord.
4.
5.
6.
7.
8.
9.
10.
Microphone Jack
Audio Line Out Jack
S-Video Port
External CRT Port
Ventilation Opening
Kensington Lock
DC-In Connector
13
The Bottom Panel
1.
2.
3.
4.
14
Hard Disk Drive
Battery
Battery Release Latch
Expansion Compartment
GETTING STARTED
Connecting to a Power Source
Connecting the AC Adapter
A universal AC adapter is provided to supply your computer with power
and also charge the computer’s battery pack. The adapter’s AC input
voltage can range anywhere from 100 to 240 volts, covering the standard
voltages available in almost every country. The power cord for the AC
adapter requires a three-hole grounded AC outlet. To connect the
computer to an external power source:
1.
2.
Plug the AC adapter’s connector into the DC-IN connector on the
right of the computer.
Connect the power cord to the AC adapter and then to a wall outlet.
Do not use inferior extension cords as this may result in damage to
your Notebook. The Notebook comes with its own AC adapter. Do
not use a different adapter to power the computer and other
electrical devices.
15
Whenever possible, keep the AC adapter plugged into the Notebook and
an electrical outlet to recharge the battery.
Never turn off or reset your Notebook while the hard disk is in use
and the CD-ROM status icon is lit; doing so can result in loss or
destruction of your data. Always wait at least 5 seconds after
turning off your Notebook before turning it back on; turning the
power on and off in rapid succession can damage the Notebook’s
electrical circuitry.
Turning On Your Notebook Computer
Turn on your Notebook by pressing the power button. Hold the button
down for a second or two and release. The Power-On Self Test (POST)
runs automatically.
After the POST is completed, the computer reads the operating system
from the hard disk drive into computer memory (this is commonly
referred to as “booting” a computer). If your OS (Operating System such
as Windows XP… . etc) is installed, it should start automatically.
To turn the Notebook off, save your work and close all open applications,
click on Start, then Shut Down and select Shut down the computer and
click "Yes" or press the power button for 4-6 seconds.
Operating on Battery Power
Your computer comes with a rechargeable battery pack that lets you
operate the computer without an external power source. When the battery
pack is fully charged, you can operate the computer for approximately 2
hours under the following conditions:
•
•
•
The battery pack initially has a full charge.
No peripheral devices are installed.
The disk/CD-ROM drives run no more than 10% of the time.
Only use batteries that are approved by an authorized dealer. All
batteries are not the same and therefore should not be treated as
such. Using the wrong battery could cause serious damage to your
computer and yourself through toxic emissions.
16
Inserting and Removing the Battery Pack
The battery pack should already be inserted in your Notebook computer
when you unpack it. If not inserted, follow these directions:
1. Turn over the notebook with the front of the unit facing you and
place it on a solid, flat surface.
2. Angle the battery into the bay. The front edge of the battery should
slide into the grooves in the system case.
3.
Gently lower the battery into the bay and push it until it clicks
securely in the bay.
To remove the battery pack:
1. Turn off the notebook, and disconnect the AC adapter. Close the
LCD panel and turn it over and place it on a solid, flat surface.
2. Lift the release latch to release the battery from the bay. At this time
the battery will now be angled slightly out of the bay.
17
3. Hold the battery at the finger grip and lift it out of the compartment.
Charging the Battery Pack
The installed battery pack charges automatically any time the computer is
connected to the AC adapter and an external power source. It is a good
idea to occasionally discharge the battery pack fully to preserve its
operating performance.
18
USING THE NOTEBOOK COMPUTER
Adjusting the LCD Screen Display
The LCD screen display can be adjusted by the following key
combinations.
KEYS
FUNCTIONS
[Fn] + [F7]
Decreases the brightness level.
[Fn] + [F8]
Increases the brightness level.
[Fn] + [F10]
Use this key combination to expand your video
screen or reset to its original size.
[Fn] + [F12]
This key combination toggles the display between
the LCD, CRT, simultaneous LCD/CRT, TV only.
LCD Care
LCD screens are delicate devices that need careful handling. Please pay
attention to the following precautions:
•
When you are not using the computer, keep the LCD screen closed
to protect it from dust.
• If you need to clean your LCD screen, use a soft tissue to gently
wipe the LCD surface.
• Do not put your fingers or sharp objects directly on the surface and
never spray cleaner directly onto the display.
• Do not press on, or store any objects on the cover when it is closed.
Doing so may cause the LCD to break.
External CRT Display
You can hook up an external monitor through the 15-pin CRT connector.
Three configurations are available:
• LCD only
• CRT only
• Simultaneous display of the LCD screen and CRT monitor
• TV only
You can switch between these display configurations by pressing the key
combination [Fn] + [F12]. For information on connecting an external
19
display, please refer to Chapter Four.
A Tour of the Notebook’s Keyboard
The Notebook’s keyboard uses a standard QWERTY layout with the
addition of special function keys and an embedded numeric keypad for
number intensive data entry. Your keyboard supports Windows by
incorporating the two Windows specific keys.
With the two Windows keys you will be able to access and take
advantage of many of the timesaving features of Windows software.
The function keys (F1 -F12) on the top row of the keyboard, serve
different purposes and carry out different tasks depending on the
application you are running.
The cursor (arrow) keys (which are all located in the lower right corner of
your keyboard) and the [PgUp], [PgDn], [Home] and [End] keys (which
are located along the right edge of the keyboard) allow you to move the
active cursor of the computer to various locations on the screen or within
the document.
The embedded numeric keypad consists of 15 keys that make number
intensive input more convenient. Like the [Num Lock] key, these keys
are labeled in blue on the keycaps. Numeric assignments are located at
the upper right of each key.
When the numeric keypad is engaged, the NumLock icon will appear in
the System Window. The keypad is activated by pressing the [Fn] +
[NumLk] key. If an external keyboard is connected, pressing the
NumLock key on either the Notebook or external keyboard will
enable/disable NumLock of both keyboards in unison.
To disable the Notebook numeric keypad while keeping the keypad on an
external keyboard activated, use the [Fn] + [NumLk] hot key on the
Notebook keyboard.
The Notebook’s Hot Key Controls
KEYS
20
FUNCTION(S)
Power Button
Press this button once to power on or enter
the suspend/resume mode.
Press this button for more than 4 seconds to
power off the system.
Internet Button
Open Internet WWW Home short-cut key
Wireless Button
Press this button to On/Off wireless function.
Email Button
Press this button to On/Off outlook function.
[Fn] + [F1]
[Fn] + [F2]
This key combination turns on/off the battery
beeping sound
This key combination turns on/off the volume.
[Fn] + [F3]
Decreases the speaker volume.
[Fn] + [F4]
Increases the speaker volume.
[Fn] + [F5]
Enable/Disable the system To uchpad function
[Fn] + [F7]
Decreases the brightness level.
[Fn] + [F8]
Increases the brightness level.
[Fn] + [F10]
Use this key combination to expand your
video screen or reset to its original size.
[Fn] + [F12]
This key combination toggles the display
between the LCD, CRT, simultaneous
LCD/CRT, TV only.
The TouchPad
The touchpad is a rectangular electronic panel located just below your
keyboard. You can use the static-sensitive panel of the touchpad and slit it
to move the cursor. You can use the buttons below the touchpad as left
and right mouse buttons.
TouchPad Precautions
The TouchPad is a pressure sensitive device. Please take note of the
following precautions.
• Make sure the TouchPad does not come into contact with dirt, liquids
or grease.
• Do not touch the TouchPad if your fingers are dirty.
21
• Do not rest heavy objects on the TouchPad or the TouchPad buttons.
You can use the TouchPad with Microsoft Windows as well as nonWindows applications.
The CD-ROM/DVD-ROM/Combo/DVD-Dual/Super Multi
Features of the CD-ROM/DVD-ROM/Combo/DVD-Dual/Super
Multi
The features of the CD-ROM/DVD-ROM/Combo/DVD-Dual/Super
Multi drive are listed below.
•
•
•
The Audio Play feature allows you to play music CDs
Front panel load/unload button
Supports CD-DA, CD-ROM mode 1 and mode 2, Multi-Session
Photo CD™ , CD-I/Video CD (pcs.)
• Low power consumption
• 12.7mm height
Precautions for Handling CD-ROM/DVD-ROM/Combo/DVDDual/Super Multi Discs
• Always hold the disc by the edges, avoid touching the surface.
• Use a clean, dry, cloth to remove dust, smudges, or fingerprints.
Wipe from the center outward.
• Do not write or place objects on the surface of the disc.
• Store discs in a cool dry place not to damage the disc.
• Do not use benzene, thinners, or cleaners with detergent. Only use
CD-ROM/DVD-ROM cleaning kits.
• Do not bend or drop the discs.
Loading a Disc
To play a CD disc, follow the instructions listed below.
1. Push the CD-ROM/DVD-ROM/Combo/DVD-Dual/Super Multi
eject button on the CD drive door. Gently pull the tray all the way
out.
2. Carefully lift the CD disc by the edges and make sure the shiny
surface is face down (the side with no writing on it). Carefully insert
the CD disc onto the tray. Push the CD disc down gently so that it
snaps onto the center ring.
3. Push the tray back into the drive.
22
To remove a CD disc , do the following:
1. Check the LED display and make sure that the computer is not
accessing the CD-ROM/DVD-ROM/Combo/DVD-Dual/Super Multi
drive.
2. Push the eject button and pull the tray all the way out.
3. Carefully pick up the CD disc by the edges and – while pressing
down on the center ring – remove the CD disc from the tray.
Do not insert any foreign objects into the disc tray. If you experience
difficulty when ejecting the CD disk tray, stretch a paper clip (or use
a pin or a thin metal rod) and insert it into the emergency eject hole
located on the right side of the front panel. The CD disk tray should
eject immediately. This procedure can also be used to remove a CD
from the drive when the Notebook is powered off.
23
Power Saving Modes
This section contains information on the Notebook’s power system,
including the AC Adapter, the battery system, recharging the battery, and
tips for conserving battery power. The power system is comprised of two
parts, the AC Adapter and the battery system. The AC Adapter converts
AC power from a wall outlet to the DC power required by the computer.
The Battery Power System
Before using the computer on battery power for the first time, check the
battery status icon on the Windows Toolbar to make sure the battery is
fully charged.
See Battery Status later in this section for a description and explanation of
the Windows Battery icon. Charging the battery takes about 3 hours to
charge when the system is in off state. If possible, always charge the
battery completely.
If you use the battery so frequently that it exceed more than 20 times
by fully discharging/charging in a single month alone, we
recommend you to perform the “Battery Calibration” process every 3
months to maintain the battery life. Please refer to the topic on
“Battery Calibration” describing how to calibrate your system
battery discussed on the latter part of this chapter.
If you discover the battery life is getting shorter, please perform the
“Battery Calibration” process immediately.
Removing the Battery Pack
To remove the battery pack from its compartment, please refer to Chapter
3, Inserting and Removing the Battery Pack.
Preparing the Battery Pack for Use
Before using the battery pack for the first time, the Smart Battery IC
within the battery pack should be calibrated in order to get accurate
reporting of remaining battery life status.
To calibrate the battery pack follows the instructions below:
1. Insert the battery into the battery compartment and turn on the
Notebook. If the battery is completely without power go to the next
step. Otherwise, let the battery run down until the battery low-low
warning beeps are heard. The system will automatically enter
Suspend mode.
24
2.
Turn the Notebook off. Connect the AC adapter and let the battery
fully recharge. When the battery charge indicator turns off, the
battery is fully charged.
3. Turn On the notebook, let the battery run down until the battery is in
low-low state and you hear a warning beeps. The system will
automatically enter the Suspend mode. You can now connect the
AC adapter.
4. The battery pack is now calibrated properly.
In general, using the battery until the low-low battery-warning indicator
appears and fully recharges the battery each time (full discharge/charge
cycle) will ensure the accurate reporting of the battery gauge status.
Automatic Battery Pack Charging Function
You can automatically charge the battery pack by using the AC Adapter.
The charge time is about three hours when the Notebook power is turned
off. The following table summarizes the charging modes:
Charge Mode
Charge Time
Fast
3 hours with the system off or in Suspend
mode. The temperature must be 25°C or
below room temperature.
Pre-Charge
A pre-charge is supplied to the Li-Ion battery
pack.
Battery Status
Windows XP has an applet in the Control Panel that will display an icon
in the Windows taskbar indicating when the Notebook is running on
battery power or is attached to the AC adapter.
This applet also displays a meter that indicates how much charge is
remaining in the battery.
Battery Low Warning
You will hear an audible beep signal every 5 seconds alerting you to the
“Battery Low” status. When the battery power reaches the “Battery Low
Low” status the beeping sound will accelerate.
Your battery now has 1 ~ 2 minutes of battery charge remaining. You
must save your data or connect AC power immediately; otherwise, you
may lose your data.
25
Sound
Meaning
Continuous
beeping every 5
seconds
Battery Low: Indicates that there is 7 to 10
minutes charge remaining.
Beeping
accelerates
Battery Low Low: Indicates that there is 1 to 2
minutes of battery charge remaining. Save
your work and turn off the Notebook, or connect
the AC adapter.
When there is only one minute of battery charge remaining, the Notebook
will suspend to the HDD and power off. You should connect AC power
and resume to save your work.
Small Battery for the Real Time Clock
There is a small built-in battery pack that supplies power to the system in
order to maintain certain system information while the power is off. If
the Notebook is left without a power source for long period of time, this
battery will be exhausted and system information will be lost.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's
instructions. Never remove the battery pack while the power is on as
this may result in data loss when the system loses power.
Battery Calibration
The purpose for this process is to provide a longer battery life for your
system battery pack.
1. Turn on the computer, when the text appears, press [Del] or the
[Delete] key until the system enters the BIOS Setup screen, you may
now make the necessary changes.
2. Press the è arrow key until it reaches the “Exit” menu screen.
Again press the ê arrow key and select the “Battery Calibration”
item.
Press the [Enter] key and disconnect the AC adapter then press the
[Y] key until you hear continuous battery low-low warning beeping
sounds. The system will be fully discharge and shutdown completely.
3. Connect the AC adapter and let the battery fully recharge. The
“Battery Charge LED” of the notebook will light indicating it is in
charging status.
26
4.
When the battery charge LED turns off will indicate the system is
fully charged.
5. Repeat step 1 to 4 once again.
6. The battery is now fully calibrated.
Resetting the System
After installing a software application package, you may be prompted to
reset the system to load the changed operating environment. To reset the
system, or “reboot,” press the [Ctrl]+[Alt]+[Delete] keys simultaneously.
This is known as “warm boot.” This key combination acts as “software”
reset switch when you encounter hardware or software problems, which
lock up the Notebook.
If this key combination does not shut down the Notebook, you can reset
the Notebook by using the Notebook’s power button. Should the
Notebook lock up for some reason, pressing this button powers the
Notebook off.
Adjusting the Brightness
To adjust the brightness on the LCD screen, press and hold down the [Fn]
key in the lower left hand corner of the keyboard and press the [F7] key
to reduce the brightness or [F8] to increase the brightness.
27
Page intentionally left blank
28
DESKTOP OPERATION
Your notebook is capable of providing you with efficient and productive
mobile computing, it also has the speed and capacity to service as a
desktop system.
This chapter discusses those functions of your notebook that are typical of
desktop systems.
Audio
The Multimedia Sound System
The Notebook’s built-in audio capabilities allow you to take advantage of
a wide range of education and entertainment multimedia software. The
Notebook is equipped with two internal stereo speakers, a microphone,
and input audio ports for external audio units.
An external microphone can be connected to the microphone jack.
External speakers or headphones can be connected to the Notebook’s
audio-out jack.
External audio devices can be connected to the Line in jack. All audio
features are software controlled. The Notebook’s multimedia sound
system includes the following features:
• Supports Windows Sound System compatibility
• Full Duplex operation
• Dynamic filtering reduces noise and distortion rate
• 16-bit digitized audio playback
• Built-in stereo speakers
• Digitized audio recording through the Notebook’s built-in
microphone or any external source
Audio Volume Control
The Notebook is equipped with hot-key volume controls: Pressing the
[Fn]+[F3] hot-key combination decreases the audio output volume, press
the [Fn]+[F4] hot-key combination increases the audio output volume.
29
Audio Software
Your notebook comes equipped with an integrated sound system capable
of providing you with quality audio sound through the built-in speakers or
through external speakers connected via the system ports.
Sound Recording
Your system allows you to record sounds and store them as files using the
microphone via the microphone jack on the rear of the notebook
computer. Check the Windows Help and Support Center in Windows for
information on using the various elements in sound recording.
For a high-quality sound, click on the "Volume Control" at the lower
right end of your screen. From the Volume Control windows, click
on the "Advanced" tab, click and select the "Microphone Boost"
item.
Playing Sound Files
Your notebook can play audio files stored in MIDI, WAVE or MP3 file
format. Check the Help and Support Center in Windows for information
on the functions of the Media Player.
External Speakers and Microphone
The sound system is capable in providing high-quality sound to external
speakers and receiving and processing sounds from an external
microphone or external sound source.
30
Connecting Peripheral Devices
To expand your computing capabilities, you can add a variety of external
devices to your computer.
31
Page intentionally left blank
32
INTERNET CONNECTION (OPTIONAL)
There are numerous ways to connect to the Internet. This may vary from
the user’s working environment as well as system specifications.
• Using a modem and a telephone line
• Using a wired LAN
• Using a wireless LAN (Optional)
Using a modem for Connection to Internet
• Use a telephone line to connect to the modem port of your computer.
Do not use a digital telephone line.
• Please apply to an Internet Service Provider (ISP) for Internet
service in order f or you to connect the modem to the Internet and use
e-mail.
For more detail on the Network key, please refer to your local ISP
provider and follow the procedures describe in the “ISP Installation
Guide” to proceed with the installation.
Using a wired LAN for Connection to Internet
For you connect to the Internet, a wired LAN environment normally uses
the company’s LAN or a broadband modem.
1. Use the network (LAN) cable to connect to the LAN port of the
system.
2. Select on “My Network Places” and click on the “View Network
Connection” in the “Control Panel” window.
3.
In the “Network Tasks” window, use your mouse pointer to click on
the “Local Area Connection”.
33
34
4.
Select “Properties” from the popup menu that appears
5.
In the “This connection uses the following items” field, select
“Internet Protocol (TCP/IP), and click “Properties”.
6.
Enter the system’s IP and DNS server addresses on the General tab
of the “Internet Protocol (TCP/IP) Properties” window. If DHCP is
used, click “Obtain an IP address automatically” and “Obtain DNS
server address automatically” on the General tab.
35
7.
After all the all the information are correctly entered in the “Internet
Protocol (TCP/IP) Properties” window, click “OK” to finish.
Using Both DHCP and Static IP for Connection to Internet
When you are alternatively using networks with either DHCP or static IP
addressing, you can use alternative settings that enable simultaneous
configurations of DHCP and static IP to use both of the network connects
without reconfiguring.
1. Follow the steps mentioned when you are using wired LAN
connection from 1 to 7.
2. Click on the “User configured” and enter the appropriate values in
the “Alternate Configuration” tab.
36
3.
When you have completed the entire configuration, click “OK”.
37
Using Wireless LAN Network for Connection to Internet
(Microsoft’s Service Pack 2) (Optional)
38
RUNNING BIOS SETUP
Introduction
The BIOS (Basic Input and Output System) Setup program is a menu
driven utility that enables you to make changes to the system
configuration and tailor your system to reflect installed hardware or alter
system performance. When the Notebook is turned back on, the system is
configured with the values stored in CMOS. With easy-to-use menus, you
can configure such items as:
• Hard drives and peripherals
• Boot up Drive Sequence
• Password protection
• Power Management Features
The settings made in the BIOS Setup program intimately affect how the
Notebook performs.
Navigating through BIOS Setup
The Setup program has been designed to make it as easy to use as
possible. If you accidentally make a setting and don’t know which one to
switch back to, the Setup program has a hot key that allows you to return
to the previous value.
Accessing the BIOS Setup Program
To access the BIOS Setup program, press the DEL key after the
Notebook has run through its POST.
Item Specific Help
On the right side of the Setup screen is an area labeled Item Specific Help.
This area will list navigation key shortcuts and information that is specific
for the item that you are currently editing.
The Menu Bar
The top of the screen has a menu bar with the following selections:
• Main - Use this menu to make changes to the basic system
configuration.
39
•
Advanced - Use this menu to enable and make changes to the
advanced features available on your system.
• Security - Use this menu to set a password. The password allows
boot up and controls access to the BIOS setup menu.
• Boot - Use this menu to configure the default system device used to
locate and load the Operating System and for booting up the
Notebook.
• Exit - Use this menu to exit the current menu or specify how to exit
the Setup program.
To access the menu bar items, press the right or left arrow key on the
keyboard until the desired item is highlighted.
The Legend Bar
At the bottom of the Setup screen you will notice a legend bar. The keys
in the legend bar allow you to navigate through the various setup menus.
The following table lists the keys found in the legend bar with their
corresponding alternates and functions.
Legend Key
Alternate
Function
Key
F1
Displays the General Help window. It
can be enabled from anywhere in the
BIOS.
Esc
Jumps to the Exit menu or returns to
the Main menu from a submenu.
←
Selects the menu item to the left.
→
Selects the menu item to the right.
↑ or ↓
arrow keys
Moves the cursor up and down
between fields.
Tab
Enter
Moves the cursor to the next position
available in the field.
Shift + Tab
Moves the cursor to previous position
available in the field.
Minus key (-)
Scrolls backward through the va lues
for the highlighted field.
Plus key (+)
Scrolls forward through the values for
the highlighted field.
Home
40
PgUp
Moves the cursor to the field at the
top of the window.
End
PgDn
Moves the cursor to the field at the
bottom of the window.
F9
Sets the parameters for the current
menu to their default values.
F10
Save and Exit.
Enter
Will select a sub menu or show a
range of options for a field.
Launching Submenus
Note that a right pointer symbol è appears to the left of certain fields.
This pointer indicates that a submenu can be launched from this field. A
submenu contains additional options for a field parameter. To call up a
submenu, simply move the cursor to highlight the field and press the
[Enter] key. Use the [Esc] key to return to the Main menu.
General Help
In addition to the Item Specific Help window, the BIOS Setup program
also provides a General Help screen can be called up from any menu by
simply pressing [F1]. To exit the help window, press the [Enter] or the
[Esc] key.
Save Changes and Exit the Setup Program
Refer to the Exit menu section of this chapter for detailed information on
saving changes and exiting the setup program.
41
The Main Menu
When the Setup program is accessed, the following screen appears:
42
The Advanced Menu
Selecting Advanced from the menu bar displays the advanced menu:
43
The Security Menu
The Notebook’s advanced system of security allows you to set a
password to prevent unauthorized access to system resources, data, and
the BIOS Setup Program.
44
The Boot Menu
The Boot menu allows the user to specify the order in which the
Notebook is to check for a device to boot the system. You can also
configure the way that the system will boot up. To make changes, select
Boot from the menu bar.
The following screen appears:
Use the up and down arrows to select the boot device. Then press either
the plus key [+] to move the device up the list or the minus key [-] to
move the device down the list.
45
The Exit Menu
Once you have made all of your selections from the various menus in the
Setup program, you should save your changes and exit Setup. Select Exit
from the menu bar to display the following menu:
46
VGA UTILITIES
After you have restarted Windows, open the “Control Panel” and double
click on the “Display” icon. From the “Display Properties” window,
select the “Settings” tab and click on the “Advanced” tab to enter the
“Plug and Play Monitor on Mobile Intel® 945GM Express Chipset
Family”.
47
48
Overlay Settings
49
Launch Zoom
50
Display Devices
You can adjust the right resolution for your screen display.
51
Display Settings
52
Color Correction
53
Hot Keys
ê
ê
54
ê
55
Page intentionally left blank
56
TROUBLESHOOTING
This chapter describes locating and solving problems that you may
encounter while using your computer.
Locating a Problem
Problems with your computer can be caused by something as minor as an
unplugged power cord – or as major as a damaged hard disk. The
information in this chapter is designed to help you find and solve minor
problems. If you try all the suggested solutions and you still have a
problem, make a list of what steps you have taken to correct the problem
and contact your dealer.
Successful troubleshooting is the result of careful observation, deductive
reasoning, and an organized approach to solving the problem.
The problems that you will encounter can be divided into two basic
categories: hardware problems and software problems. Hardware
problems can be further divided into electrical and mechanical problems.
You will know you have a hardware problem if the screen is dark, the
computer cannot read the disk drives, or you get an error message during
the Power-On Self Test (POST).
Software errors can occur at several levels. The ROM BIOS and the
operating system can give you a large number of error messages. On top
of this, each application software package has its own set of error
messages. It is impo rtant to determine whether the software error me ssage
you are getting is from the application or the operating system. Once you
know this, you can look in the respective manual for a solution to the
problem.
Checking Cables and Connections
Start by performing a careful visual inspection of the exterior of the
computer. If no LEDs are illuminated, make sure that your computer and
its peripherals are getting power and communicating with each other
properly.
To check the power cables, and connections:
1. If you have been using battery power, connect the Notebook to an
external power source and make sure that the battery has a charge.
57
7.
If you are using the Notebook with the AC adapter, check the power
outlet, the powe r cord, and any power switches that may affect your
computer.
8. Check the wall outlet or power strip with an item that you know is
functioning properly. A lamp or radio is a convenient item for
checking the power. You may also need to check the fuses and
breakers in your electric box.
9. If the outlet is controlled by a wall switch, make sure that the switch
is on.
10. If the outlet is controlled by a dimmer switch, use a different outlet.
11. If your computer is plugged into a power strip with an On/Off switch,
make sure the switch is on.
12. With the computer’s power switched off, check all cable connections.
If the computer is connected to any peripheral devices, look for loose
or disconnected cables.
If the computer is too close to a wall, a cable connection may be loose or
the cables may be crimped.
Do not substitute cables for different devices (other
than the manufacturer recommended cables) even if they look
exactly alike. The wiring inside the cable may be different.
13. When you are certain that you have power available and all
connections are good, turn the computer on again. If the computer
still does not start, you may have a hardware problem.
The Power-On Self Test
The Power-On Self Test (POST) runs every time you turn on or reset the
Notebook. The POST checks memory, the main system board, the display,
the keyboard, the disk drives, and other installed options.
A few seconds after you turn on your computer, a copyright message
appears on your display screen. A memory test message appears next; as
the test continues, memory size increases until all installed memory is
tested. Normally, the only test routine visible on the screen will be the
memory test.
58
Two classifications of malfunctions can be detected during the POST:
• Error messages that indicate a failure with either the hardware, the
software, or the Basic Input/Output System (BIOS). These critical
malfunctions prevent the computer from operating at all or could
cause incorrect and apparent results. An example of a critical error is
microprocessor malfunction.
• Messages that furnish important information on the power-on and
boot processes (such as memory status). These non-critical
malfunctions are those that cause incorrect results that may not be
readily apparent. An example of a non-critical error would be a
memory chip failure.
In general, if the POST detects a system board failure (a critical error),
the computer halts and generates a series of beeps. If failure is detected in
an area other than the system board (such as the display, keyboard, or an
adapter card) an error message is displayed on the screen and testing is
stopped. It is important to remember that the POST does not test all areas
of the computer, only those that allow it to be operational enough to run
diagnostic programs.
If your system does not successfully complete the POST, but displays a
blank screen, emits a series of beeps, or displays an error code, consult
your dealer.
General Hardware Problems
A few common hardware problems and suggested solutions are presented
in the table below:
Problem: Failure in the installation of the Audio driver.
Solution: Be sure to first remove the current audio device from
your system. Please follow the instruction on the installation of
audio driver.
Problem: The display screen is dark
Solution: Make sure that the computer is not in Suspend mode.
Check the Brightness controls for the screen. If the controls are
turned too far down, the screen will be dark.
Problem: An incorrect date and time are displayed.
Solution: Correct the date and time using the DOS DATE and
TIME commands or the options in the Setup Utility. If the date and
time become incorrect after a short time, your CMOS battery may
be depleted. Contact your dealer to change the battery.
Problem: You hear irregular beeps during operation of the
Notebook and the system halts.
59
Solution: The problem is beyond the scope of this manual.
Contact technical support.
Problem: An unidentified message is displayed.
Solution: Reboot the computer and run the BIOS system setup.
Confirm the Setup parameters. If the same message is displayed
after booting up again, contact technical support for assistance.
Problem: The system cannot access the CD-ROM/DVDROM/Combo/DVD-Dual/Super Multi drive.
Solution: Check that a CD is properly inserted in the drive.
Make sure that you are using the correct program for that kind of
CD. For example, the system cannot read a data CD using an
audio program.
Problem: You cannot operate the printer.
Solution: Check the printer cable connection. Ensure that the
printer power switch is turned on. Confirm that the printer is on-line.
Problem: You cannot use the mouse.
Solution:
• Check the cable connection.
• Check the mouse with another application to see if there is a
software incompatibility problem.
• If possible, check the mouse with another computer to see if it works.
If it doesn’t operate on a different system, the mouse might be
broken.
Contacting Your Dealer
If you still have a problem after reading the preceding sections, the next
step is to contact your dealer. Your dealer can determine if the problem is
something that requires the computer to be taken to the shop. Before you
call your dealer, however, prepare the following information:
•
•
•
•
60
How is your computer configured? Your dealer needs to know what
peripheral devices you are using.
What messages, if any, are on the screen?
What software were you running at the time?
What have you done already to try to solve the problem? If you have
overlooked a step, your dealer may be able to solve the problem over
the phone.
UPGRADING YOUR SYSTEM
61
Upgrading your System CPU
Refer to the following illustration on upgrading your notebook's CPU
Be sure to loosen all the screws first before removing it totally to
release the heatsink. Failure to do so will cause a major damage to
the heatsink.
62
Upgrading your Memory (1)
Upgrading your Memory (2)
63
The Easy to Upgrade HDD Module
The hard drive in your notebook computer is made to be easily swapped
out for upgrading.
To upgrade your Hard Drive
64
SPECIFICATION
Detailed Notebook Specifications
Processor
• Intel® Yonah® Dual core Processor, 2MB L2 cache on die, 667
MHz FSB)
• Intel® Yonah® Single core Processor, 2MB L2 cache on die, 667
MHz FSB)
Operating System Compliance
• Microsoft® Windows ® XP Professional Edition
• Microsoft® Windows ® XP Home Edition
Core Logic
• Intel® 945GM + ICH7-M
Memory
•
•
Expansion 2 slots of 200pin SO-DIMM DDRII module
Support DDRII 400/533/667MHz module
LCD Display
•
•
15.0” XGA (1024x768) TFT LCD display
15.4” Widescreen TFT LCD display
Video & Graphics
•
Intel® 945GM with Embedded 3D engine, UMA(United Memory
Architecture) 64MB/128MB DDRII SDRAM
Hard Drive
•
2.5” HDD, SATA interface support
Optical Drive
•
Combo Drive (DVD-ROM + CD-RW), DVD Dual (DVD+/-RW),
Super Multi (DVD-RAM+DVD+/-RW)
AV Feature Built-in (Optional)
TV Tuner
•
Built-in USB interface TV Tuner card
65
•
Digital Terrestrial TV Receiver
Remote
•
Friendly user interface to enjoy AV function, includes TV, DVD,
Music
Pointing Device
•
Touchpad
Application Launch Key
•
Power On/Off, WWW, E-mail, WLAN On/Off
LED Status Indicator
•
Power, Suspend/Resume, Battery Charging Staus, Hard Disk
Access, NumLock mode, CapsLock mode, ScrollLock mode,
WLAN status
Keyboard
•
3.0mm travel, Inverted-T, 88 keys with Windows keys
Audio
•
Built-in two high definition quality speakers
AC Adapter
•
•
Input: 100-240V AC, 50-60Hz, 1.5A, Universal
Output: 19V DC, 3.42A, 65W
Battery
•
6 cell battery / 8 cell battery
BIOS
•
AMI, Support PnP, password ,Bootable from USB Disk/ Optical
device
Card Reader (Optional)
• 4-in-1 Card Reader (SD/MS/MS Pro/MMC card)
Communication
•
•
•
10/100/1000 Ethernet on board
Built-in MDC 56Kbps Fax/Modem
802.11a/b/g network connection (Intel/WM3945ABG)
Power Management
•
•
PC 2001 and ACPI compliance
Support Stand-by, Suspend to Disk, Suspend to RAM,Smart
Battery System support
Security
•
66
Kensington Lock
Size
•
355 x 273 x 40 (mm)
Weight
•
Approximately 2.85kg with 15.4" WXGA panel, 6 cell battery and
optical drive installed
PS
•
•
Battery life will vary depending on your specific hardware and
software configuration
Spec subject to be changed without notice
67

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2006:02:10 18:00:10Z
Modify Date                     : 2006:02:13 10:35:27+08:00
Page Count                      : 77
Creation Date                   : 2006:02:10 18:00:10Z
Author                          : Cathy
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Mod Date                        : 2006:02:13 10:35:27+08:00
Metadata Date                   : 2006:02:13 10:35:27+08:00
Title                           : 335 _e_v1.0.doc
Creator                         : Cathy

EXIF Metadata provided by EXIF.tools