ELITEGROUP COMPUTER SYSTEMS H70QBGXB Tablet PC with 11bg WLAN and Bluetooth User Manual H70 e v2

Download:
Mirror Download [FCC.gov]
Document ID	634160
Application ID	QBMWkZA62gV1QwXS2DYuFw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	196.83kB (2460424 bits)
Date Submitted	2006-03-07 00:00:00
Date Available	2006-03-07 00:00:00
Creation Date	2006-03-06 18:02:40
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	2006-03-07 09:26:00
Document Title	H70 _e_v2.doc
Document Creator	H70 (e)v2 - Microsoft Word
Document Author:	Cathy

Preface
 Copyright 2005
All Rights Reserved.
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect,
special, incidental, or consequential damages arising out of the
use or inability to use the product or documentation, even if
advised of the possibility of such damages.
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic, or other means in any
form without prior written permission of the manufacturer.
Trademarks
AutoCAD and Autoshade are trademarks of Autodesk, Inc. IBM,
OS/2, and VGA are trademarks of International Business Machines
Corp. Lotus, 1-2-3, and Symphony are trademarks of Lotus
Development Corp. Windows, Word, MS-DOS, and Microsoft are
trademarks of Microsoft Corp. VESA is a trademark of Video
Electronics Standards Association.
Other product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered
trademarks of their respective companies.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy
of this manual, the manufacturer and distributor assume no liability
resulting from errors or omissions in this manual, or from the use of
the information contained herein.
Notices
Federal Communications Commission Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with FCC RF exposure compliance requirements, please avoid direct
contact to the transmitting antenna during transmitting.
We declare that the Product is limited in CH1~CH11 by specified firmware
controlled in the USA.
ii
EC DECLARATION OF CONFORMITY (EUROPE)
Hereby, Elitegroup, declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC
as listed below
Article 3.1(a): EN 60950, EN50371
Article 3.1(b): EN 301 489-1, 301 489-17
Article 3.2: EN 300 328
0976
Caution:
This equipment is intended to be used in all EU and EFTA countries.
Outdoor use may be restricted to certain frequencies and/or may require a
license for operation. Contact local Authority for procedure to follow. Note:
Combinations of power levels and antennas resulting in a radiated power
level of above 100 mW equivalent isotropic radiated power (EIRP) are
considered as not compliant with the above mentioned directive and are
not allowed for use within the European community and countries that have
adopted the European R&TTE directive 1999/5/EC.
List of national restrictions:
Bulgaria: General authorization required for outdoor use and public service.
France: Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5
MHz.
Italy: If used outside of own premises, general authorization is required.
Luxembourg: General authorization required for public service.
Rumania: On a secondary basis. Individual license required. T/R 22-06 not
implemented
iii
Notice:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. Shielded interface cables and a nonshielded AC power cord must be used in order to comply with
emission limits.
This equipment is to be used with power supply: 65W
There is no internal power supply.
iv
Table of Content
BEFORE YOU START ........................................................................ 1
LET YOUR COMPUTER ACCLIMATE ITSELF .......................................... 6
HEAT, COLD, HUMIDITY , AND GLARE ............................................... 7
SUITABLE PLACE TO WORK ............................................................. 7
INTRODUCTION ................................................................................ 9
POWERING UP THE TABLET PC....................................................... 9
FRONT SIDE FEATURES ................................................................10
TOP SIDE FEATURES....................................................................11
RIGHT SIDE FEATURES .................................................................13
LEFT S IDE FEATURES...................................................................13
THE BACK SIDE FEATURES ...........................................................14
APPLICATION B UTTONS ................................................................14
NAVIGATION BUTTONS .................................................................15
TOUCHPAD BUTTONS ...................................................................15
GETTING STARTED .........................................................................17
CONNECTING THE AC A DAPTER.....................................................17
TURNING ON YOUR C OMPUTER .....................................................18
OPERATING ON BATTERY POWER...................................................18
USING THE COMPUTER ....................................................................21
FEATURES OF THE COMBO D RIVE (DVD-ROM + CD-RW), DVD DUAL
(DVD+/-RW), SUPER MULTI (DVD-RAM+DVD+/-RW) MODULE .......22
PRECAUTIONS FOR HANDLING CD D ISCS ........................................22
LOADING A DISC ..........................................................................22
THE BATTERY POWER SYSTEM ......................................................23
REMOVING THE BATTERY PACK .....................................................24
W RITING AREA ............................................................................27
USING THE SCREEN KEYBOARD .....................................................27
ON SCREEN KEYBOARD ...............................................................27
W RITING PAD ..............................................................................28
CHARACTER PAD .........................................................................28
CALIBRATION < 4 PTS CAL > ..........................................................30
ADVANCED < 25 PTS CAL > ...........................................................30
HELP W INDOWS ..........................................................................31
DESKTOP ...................................................................................31
CONTROL PANEL .........................................................................33
DESKTOP OPERATION .....................................................................35
THE MULTIMEDIA S OUND SYSTEM ..................................................35
AUDIO V OLUME CONTROL .............................................................35
AUDIO S OFTWARE .......................................................................36
SOUND RECORDING .....................................................................37
PLAYING SOUND F ILES .................................................................37
E XTERNAL SPEAKERS AND MICROPHONE ........................................37
INTERNET CONNECTION (OPTIONAL)..................................................39
RUNNING BIOS S ETUP ....................................................................47
ITEM SPECIFIC HELP ....................................................................47
THE LEGEND BAR ........................................................................48
LAUNCHING S UBMENUS ................................................................49
GENERAL HELP ...........................................................................49
VGA UTILITIES ...............................................................................55
INTEL (R) GRAPHICS MEDIA A CCELERATOR DRIVER FOR MOBILE ........56
VIDEO CONFERENCING (OPTION) ......................................................59
USING COMMANDS AND BUTTONS ..................................................60
TROUBLESHOOTING ........................................................................65
SYSTEM NOT RESUMING OPERATION .............................................66
DISPLAY SCREEN IS BLANK OR DIFFICULT TO READ ..........................66
TABLET PC IS NOT RESPONDING TO THE PEN ..................................66
THE TABLET PC CAN NOT P OWER ON .............................................67
THE CURSOR NOT IN POSITION WHILE USING THE ORDINARY PEN .........67
THE COMPUTER IS UNABLE TO CONNECT TO THE INTERNET.................67
NO SOUND ON THE EXTERNAL SPEAKERS OR HEADPHONES.................67
BEEPING SOUND..........................................................................67
IF THE CURSOR IS NOT IN POSITION WITH THE TOUCH PEN ...................67
SPECIFICATION ...............................................................................69
Canadian DOC Notice For Class B Computing Devices
vi
This Class B digital apparatus meets all requirements of the
Canadian Interference - Causing Equipment Regulations.
Cet appareil numerique de la classe B repecte toutes les
exigences du Règlement sur le matèriel brouilleur du Canada.
Personal Inventory
This computer system is designed for years of productive and
pleasurable computing. Use this section to keep notes about
details of your purchase. Update this section when you add new
options.
Date of Purchase:
Dealer’s Name:
Phone:
Address:
E-Mail Address:
WWW Site:
Serial Number:
CPU Type:
Hard Disk Capacity:
Memory Capacity:
Optional Equipment:
vii
Before you Start
CONVENTIONS OF THIS M ANUAL
Use this manual will help you get the most from your computer.
• If you are an experienced user of computers and/or
Microsoft’s Windows operating systems, you might find it
useful to read the Quick Start Guide that comes along with
your accessories.
• If you are a less experienced user, you should through the
manual carefully before using your system.
Whether or not you are an experienced user, you should consult
on the Troubleshooting Chapter if you encounter any problems
with your computer.
S AFETY PRECAUTIONS
This section is designed to assist you in identifying potentially
unsafe conditions while working with this product. Required safety
features have been installed in the computer to protect you from
injury. However, you should use good judgment to identify potential
safety hazards:
1.
2.
3.
4.
5.
6.
Please read these safety instructions carefully.
Please keep this User's Manual for later reference.
Please disconnect this equipment from AC outlet before
cleaning. Don't use liquid or sprayed detergent for cleaning.
Use moisture sheet or cloth for cleaning.
For pluggable equipment, that the socket-outlet shall be
installed near the equipment and shall be easily accessible.
Please keep this equipment from humidity.
Lay this equipment on a reliable surface when installed. A
drop or fall could cause injury.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Make sure to use the right voltage for the power source when
connecting the equipment to the power outlet.
Place the power cord in such a way that people can not step
on it. Do not place anything on top of the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not use for a long time, disconnect the
equipment from the main power outlet to avoid being damaged
by transient overvoltage.
Never pour any liquid into the opening, this could cause fire or
electrical shock.
Never open the equipment. For safety reason, the equipment
should only be opened by a qualified service personnel.
If on the following situations arises, get the equipment
checked by a service personnel:
a. The Power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment has not worked well or you cannot get it work
according to the user's manual.
e. The equipment has dropped and damaged.
f. If the equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned,
storage temperature above 60°C (140°f), it may damage the
equipment.
The unit can be operated at an ambient temperature of max.
35°C.
The sound pressure level at the operators position according
to IEC 704-1: 1982 is equal or less than 70 dB(A).
Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor,
whether it is 100-120 or 200-240 Vac. The following
information explains the requirements for power cord set
selection.
Ø The cord set must be approved for the country in
which it is used.
Ø The appliance coupler must have a configuration
for mating with a CEE22/EN6032/IEC 320
appliance inlet.
A. For U.S. and Canada:
Ø The cord set must be UL Listed and CSA Certified.
18.
19.
20.
21.
22.
Ø The minimum specifications for the flexible cord
are No. 18 AWG.
B. For Japan:
Ø All components of the cord set must bear a “PSE”
or “ T ” mark and registration number in
accordance with the Japanese Dentori Law.
Ø The minimum specifications for the flexible cord
are .75m ㎡ conductors.
C. For Other Countries:
Ø The cord set fittings must bear the certification
mark of the agency responsible for evaluation in a
specific country.
Ø The flexible cord must be of a HAR (harmonized)
type H03VV-F.
Ø The cord set must have a current capacity of a
least 2.5 Amperes and voltage rating of 125 or
250 Vac.
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. These precautions
includes the following:
Ø
Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
Ø
Avoid using a telephone (other than a cordless type) during
an electrical storm. There may be a remote risk of electric
shock from lightning.
Ø
Do not use the telephone to report a gas leak in the vicinity
of the leak.
Ø
Use only the power cord indicated in this manual.
Do not use the AC adapter near open water or other liquids.
Never spill liquid into the AC adapter.
Laser Warning: Laser Class I Product Caution - Invisible laser
radiation when open avoid exposure to beam.
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer's instructions. Never remove the battery pack
while the power is on as this may result in data loss when the
system loses power.
The input receptacle is used as the main disconnecting device.
WICHTIGE SICHERHEITSHINWEISE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Bitte lesen Sie diese Hinweis sorgfältig durch.
Heben Sie dirse Anleitung für den späteren Gebrauch auf.
Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.
Versenden Sie Keine Flüssig- oder Aerosolreiniger. Am
besten eignet sich ein angefeuchtetes Tuch zur Reinigung.
Die Netzanschlußsteckdose soll nahe dem Gerät angebracht
und leicht zugänglich sein.
Das Gerät ist vor Feuchtigkeit zu schützen.
Bei der Aufstellung des Gerätes ist auf sicheren Stand zu
achten. Ein Kippen oder Fallen könnte Beschädigungen
hervorrufen.
Beachten Sie beim Anschluß an das Stromnet die
Anschlußwerte.
Verlegen Sie die Netzanschlußleitung so, daß niemand
darüber fallen kann. Es sollte auch nichts auf der Leitun
abgestellt werden.
Alle Hinweise und Warnungen, die sich am Gerät befinden,
sind zu beachten.
Wird das Gerät üeinen längeren Zeitraum nicht benutzt,
sollten Sie es vom Stromnetz trennen. Somit wird im Falle
einer Überspannung eine Beschädigung vermieden.
Durch die Lüftungsöffnungen dürfen niemals Gegenstände
oder Flüssigkeien in das Gerät gelangen. Dies könne einen
Brand bzw. Elektrischen Schlag auslösen.
Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen
der elektrischen Sicherheit nur von authorisiertem
Servicepersonal geöffnet werden.
Wenn folgende Situationen auftreten ist das Gerät vom
Stromnetz zu trennen und von einer qualifizierten Servicestelle
zu Überprüfung.:
a. Netzlabel oder Netzstecker sind beschädigt.
b. Flüssigkeit ist in das Gerät eingedrungen.
c. Das Gerät war Feuchtigkeit ausgesetzt.
d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend
funktioniert oder Sie mit Hilfe dieser Anleitung keine
Verbesserung erzielen.
e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
14. VORSICHT: Explosiongsgetahr bei unsachgemäßen
Austausch der Batterie. Ersatz nur durch denselben oder
einem vom Hersteller empfohlenem ähnlichen Typ.
Entsorgung gebrauchter Batterien nach Angaben des
Herstellers.
15. Dieses Schaltnetzteil kann bis zu einer Außentemperatur von
maximal 35ºC.
16. Die Ausgangswerte dürfen nicht die auf dem Label
angegebenen Werte überschreiten.
17. Anforderungen an das Stromkabel
Das Kabel-Set, das an das Netzteil angeschlossen wird, muss
den Anforderungen des Landes, in dem Sie das Netzteil
einsetzen, genügen, je nachdem, ob die Netzspannung 100120 oder 200-240V Wechselspannung beträgt.
Ø Das Kabel-Set muss für das Land, in dem es
eingesetzt wird, zugelassen sein.
Ø Der Gerätestecker des Kabels muss in eine
CEE22/ EN603/ IEC 320 Buchse passen.
A. Für die USA und Kanada:
Ø Das Kabel-Set muss UL-gelistet und CSA
zertifiziert sein.
Ø Die Minimalanforderungen für das Kabel
entsprechen No. 18 AWG.
B. Für Japan:
Ø Alle Teile des Kabel-Sets müssen entsprechend
dem japanischen Dentori Law mit einem „PSE“ or
„T”-Symbol markiert sein
Ø Die Minimalanforderungen für das Kabel
sind .75m ㎡ Leiter.
C. Für andere Länder:
Ø Die Zubehörteile des Kabel-Sets müssen das
Prüfsiegel derjenigen Stelle, die in dem jeweiligen
Land für die Sicherheitsprüfung zuständig ist,
tragen.
Ø Das Kabel muss vom HAR (harmonisierten) Typ
H03VV-F sein.
Ø Das Kabel-Set muss eine Stromkapazität von
mindestens 2,5 Ampere haben und Spannungen
von 125 oder 250 V Wechselstrom gestatten.
18. Bei der Benutzung Ihres Telefongerätes sollten Sie immer die
grundlegenden Sicherheitsmaßnahmen beachten, um das
Risiko von Feuer, Stromschlägen und Verletzungen zu
minimieren. Zu beachten sind u.a. folgende Punkte:
Ø
Benutzen Sie das Gerät nicht in der Nähe von Wasser, wie
zum Beispiel Badewanne, Waschbecken, Spülbecken,
Waschbottich, in feuchten Kellerräumen oder in der Nähe
von Schwimmbecken.
Ø
Benutzen Sie kein Telefon (ausgenommen schnurlose
Modelle) während eines Gewitters. Es besteht das geringe
Restrisiko eines Blitzschlages.
Ø
Benutzen Sie das Telefon nicht um ein Gasleck zu melden,
falls es sich in der Nähe des Lecks befindet.
Ø
Benutzen Sie nur solch ein Stromkabel, wie in dieser
Anleitung beschrieben.
19. Benutzen Sie das Netzteil nicht in unmittelbarer Nähe zu
Wasser oder anderen Flüssigkeiten. Gießen Sie nie
Flüssigkeiten über das Netzteil.
20. Achtung Laser: Laser Produkt der Klasse I. Achtung Unsichtbarer Laserstrahl, vermeiden Sie Kontakt mit dem
Strahl bei offenem Gehäuse.
21. Es besteht Explosionsgefahr, wenn der Akku nicht
ordnungsgemäß ersetzt wird. Ersetzen Sie den Akku nur
durch einen Akku gleichen oder äquivalenten Typs, der vom
Hersteller empfohlen wird. Entsorgen Sie Akkus entsprechend
den Anweisungen des Herstellers. Entfernen Sie den Akku auf
keinen Fall bei eingeschaltetem computer, da hierdurch Daten
verloren gehen könnten.
22. Der Netzeingabeanschluss dient als Hauptschalter des Geräts.
THINGS YOU MUST REMEMBER BEFORE WORKING ON YOUR
COMPUTER
LET YOUR COMPUTER ACCLIMATE ITSELF
Your computer can easily stand temperature extremes but it
doesn’t like rapid changes in temperature, like going from the cold
outdoors to a warm office. Rapid changes in temperature can
cause water droplets to condense inside your case, threatening to
damage the electronic parts inside.
After receiving your computer when it’s hot or cold outside, try not
to power up the computer immediately, let the computer adjust to
the room temperature gradually at least for three to four hours.
If your system arrives in cold weather, do not apply
power to the computer or monitor until they have been allowed to
come to room temperature.
HEAT , COLD, HUMIDITY, AND GLARE
Find a suitable place for your computer that’s not too hot, too cold,
too dark, or too bright. Glare can make it hard to read the screen.
• Try to avoid the computer components from being destroyed
if it is over heated, so try to allow plenty of room for air to
circulate around the case.
• Do not block the ventilation opening.
• Do not place your computer in direct sunlight.
SUITABLE PLACE TO WORK
Your computer will run well wherever you’re comfortable but
extremes of temperature and humidity can be challenging to your
system’s parts. There are some things you can tolerate that the
computer can’t – things like static electricity, dust, water, steam
and oil. In case you decide to pull over for roadside computing, try
to choose a clean, comfortable work area for your system.
A lithium-ion battery pack will be available when you are traveling.
If you are running your system for the first time on battery power,
remove the battery from the package, install it into the system and
recharge the battery to fully prepare for service.
8
Introduction
WELCOME TO THE TABLET PC
Congratulations on your purchase of the Tablet PC. Your computer
features the latest advances in portable computing technology.
The computer’s modular design provides maximum expandability
without compromising portability.
POWERING UP THE T ABLET PC
At the top of the Tablet PC, locate on the power button and press
for a few seconds to power up the system.
FRONT SIDE FEATURES
1.
2.
3.
Speaker
Stick Pointer Button (Mouse Left Button)
Media Player Adjustment Buttons
Use these buttons for adjustment when you are playing
any audio or video files using the Windows’ Media Player.
Œ
10
Volume Up Button – Press this button to increase the
volume.
•
Ž
•
•
Play/Pause Button – Press this button to start
playing/pause any file.
Next Track Button – Press this button to start the next
track
Previous Track Button – Press this button to start the
previous track.
Volume Down Button – Press this button to decrease the
volume.
4. Stick Point Button (Mouse Right Button)
5. Internet Explorer Button
6. Ctrl-Alt-Del Button
7. Built-In Camera
8. Page Up Button
9. Stick Point
10. Page Down Button
11. Media Player Button
12. Camera Button
TOP SIDE FEATURES
1.
2.
Power Button
CardReader
11
Be sure the face of the card must be facing down when
inserting without using the stand or bottom side facing you when
inserting using the stand.
3.
Lock Switch
You will not be able to open the system if this button is in
lock position. To unlock, slide it back to the direction of the power
button.
LED Indicator
Battery Charge LED Indicator
HDD LED Indicator
Wireless LED Indicator
4.
5.
6.
7.
8.
9.
12
Microphone Jack
Earphone Jack
USB 2.0 Port
RIGHT SIDE FEATURES
1. DC-In Connector
2. Brightness Control Buttons
3. Pen Holder
LEFT SIDE FEATURES
1.
USB 2.0 Port
13
THE B ACK SIDE FEATURES
1.
2.
Battery Compartment
Tablet’s Stand
3.
Battery Release Latch
Slide the latch to right direction will lock and to left
direction will unlock the battery compartment cover.
CONTROL BUTTONS
APPLICATION BUTTONS
Icon
KEYS
Internet Button
14
FUNCTION(S)
Press this button to launch the Internet
Explorer.
Setting Button
Multimedia Button
Camera Button
Press this button to execute the Ctrl-AltDel function.
Press this button to execute the Media
Player function
Press this button to turn ON the camera
function.
N AVIGAT ION BUTTONS
This buttons consists of Page Up and Page Down
segments.
When you press the Page Up •, you will scroll up
one page.
When you press the Page Down ‚, you will scroll
down one page.
TOUCHPAD BUTTONS
This buttons consists of the equivalent function when
you are using the mouse.
When you press the
button, this will execute the
double clicking function you normally use on a
conventional mouse.
When you press the button, this will execute other
list of functions.
STATUS DISPLAY
Icons appear at the bottom of each individual system status LEDs
display indicating the present status of system.
Icon
Keys
Power
LED Status
Blue
Off
Battery
Green
Red
Green Blinking
Remarks
Press this button once to power on
or enter the suspend/resume
mode (blinking LED).
Press this button for more than 4
seconds to power off the system.
Battery capacity 10~95%
Low battery capacity (less than
10%)
Battery charging status
15
Wireless
Green
The system is in wireless status
HDD
Green
Displayed when hard disk drive is
accessed
Hard disk is not being accessed
Off
16
Getting Started
CONNECTING TO A POWER SOURCE
CONNECTING THE AC ADAPTER
A universal AC adapter is provided to supply your computer with
power and also charge the computer’s battery pack. The adapter’s
AC input voltage can range anywhere from 100 to 240 volts,
covering the standard voltages available in almost every country.
The power cord for the AC adapter requires a three-hole grounded
AC outlet. To connect the computer to an external power source:
Do not use inferior extension cords as this may
result in damage to your computer. The computer comes with its
own AC adapter. Do not use a different adapter to power the
computer and other electrical devices.
17
Whenever possible, keep the AC adapter plugged into the
computer and an electrical outlet to recharge the battery.
Never turn off or reset your comptuer while the hard
disk is in use; doing so can result in loss or destruction of your data.
Always wait at least 5 seconds after turning off your computer before
turning it back on; turning the power on and off in rapid succession
can damage the computer’s electrical circuitry.
TURNING ON Y OUR COMPUTER
Turn on your computer by pressing the power button. Hold the
button down for a second or two and release. The Power-On Self
Test (POST) runs automatically.
After the POST is completed, the computer reads the operating
system from the hard disk drive into computer memory (this is
commonly referred to as “booting” a computer). If your OS
(Operating System such as Windows XP… . etc) is installed, it
should start automatically.
To turn the computer off, save your work and close all open
applications, click on Start, then Shut Down and select Shut
down the computer and click "Yes" or press the power button for
4-6 seconds.
OPERATING ON B ATTERY POWER
Your computer comes with a rechargeable battery pack that lets
you operate the computer without an external power source.
When the battery pack is fully charged, you can operate the
computer under the following conditions:
•
•
The battery pack initially has a full charge.
No peripheral devices are installed.
Only use batteries that are approved by an authorized
dealer. All batteries are not the same and therefore should not be
treated as such. Using the wrong battery could cause serious
damage to your computer and yourself through toxic emi ssions.
Inserting and Removing the Battery Pack
The battery pack should already be inserted in your computer
when you unpack it. If not inserted, follow these directions:
18
To remove the battery pack:
19
Charging the Battery Pack
The installed battery pack charges automatically any time the
computer is connected to the AC adapter and an external power
source. It is a good idea to occasionally discharge the battery pack
fully to preserve its operating performance.
20
Using the Computer
THE STICK POINTER
The Stick Pointer is a round electronic panel located at the right of
the LCD panel. You can use the buttons at the left that act as left
and right buttons of an ordinary mouse.
Stick Pointer Precautions
The Stick Pointer is a pressure sensitive device. Please take note
of the following precautions.
• Make sure the Stick Pointer does not come into contact with
dirt, liquids or grease.
• Do not touch the Stick Pointer if your fingers are dirty.
• Do not rest heavy objects on the Stick Pointer or the Stick
Pointer buttons.
You can use the Stick Pointer with Microsoft Windows as well as
non-Windows applications.
21
THE COMBO DRIVE (DVD-ROM + CD-RW), DVD DUAL (DVD+/RW), SUPER MULTI (DVD-RAM+DVD+/-RW)
FEATURES OF THE COMBO DRIVE (DVD-ROM + CD-RW), DVD
DUAL (DVD+/-RW), SUPER MULTI (DVD-RAM+DVD+/-RW)
MODULE
The features of the Combo Drive (DVD-ROM + CD-RW), DVD
Dual (DVD+/-RW), Super Multi (DVD-RAM+DVD+/-RW) drive are
listed below.
• The Audio Play feature allows you to play music CDs
• Front panel load/unload button
• Supports CD-DA, CD-ROM mode 1 and mode 2, MultiSession Photo CD™ , CD-I/Video CD (pcs.)
• Low power consumption
• 12.7mm height
PRECAUTIONS FOR HANDLING CD DISCS
•
•
•
•
•
•
Always hold the disc by the edges, avoid touching the
surface.
Use a clean, dry, cloth to remove dust, smudges, or
fingerprints. Wipe from the center outward.
Do not write or place objects on the surface of the disc.
Store discs in a cool dry place not to damage the disc.
Do not use benzene, thinners, or cleaners with detergent.
Only use CD-ROM/DVD-ROM/Combo cleaning kits.
Do not bend or drop the discs.
LOADING A DISC
To play a CD disc, follow the instructions listed below.
1. Push the Combo Drive (DVD-ROM + CD-RW), DVD Dual
(DVD+/-RW), Super Multi (DVD-RAM+DVD+/-RW) eject
button on the CD drive door. Gently pull the tray all the way
out.
2. Carefully lift the CD disc by the edges and make sure the
shiny surface is face down (the side with no writing on it).
Carefully insert the CD disc onto the tray. Push the CD disc
down gently so that it snaps onto the center ring.
3. Push the tray back into the drive.
To remove a CD disc, do the following:
22
1.
2.
3.
Check the LED display and make sure that the computer is not
accessing the Combo Drive (DVD-ROM + CD-RW), DVD Dual
(DVD+/-RW), Super Multi (DVD-RAM+DVD+/-RW) drive.
Push the eject button and pull the tray all the way out.
Carefully pick up the CD disc by the edges and – while
pressing down on the center ring – remove the CD disc from
the tray.
Do not insert any foreign objects into the disc tray. If you
experience difficulty when ejecting the CD disc tray, stretch a paper
clip (or use a pin or a thin metal rod) and insert it into the eme rgency
eject hole located on the right side of the front panel. The CD disk
tray should eject immediately. This procedure can also be used to
remove a CD from the drive when the computer is powered off.
POWER S AVING MODES
This section contains information on the computer’s power system,
including the AC Adapter, the battery system, recharging the
battery, and tips for conserving battery power.
The power system is comprised of two parts, the AC Adapter and
the battery system. The AC Adapter converts AC power from a wall
outlet to the DC power required by the computer.
THE B ATTERY POWER SYSTEM
Before using the computer on battery power for the first time,
check the battery status icon on the Windows Toolbar to make
sure the battery is fully charged.
See Battery Status later in this section for a description and
explanation of the Windows Battery icon. Charging the battery
takes about 3 hours to charge when the system is in off state. If
possible, always charge the battery completely.
If you use the battery so frequently that it exceed more than 20 times
by fully discharging/charging in a single month alone, we
recommend you to perform the “Battery Calibration” process every 3
months to maintain the battery life. Please refer to the topic on
“Battery Calibration” describing how to calibrate your system
battery discussed on the latter part of this chapter.
If you discover the battery life is getting shorter, please perform the
“Battery Calibration” process immediately.
23
REMOVING THE BATTERY P ACK
To remove the battery pack from its compartment, please refer to
Chapter 3, Inserting and Removing the Battery Pack.
Preparing the Battery Pack for Use
Before using the battery pack for the first time, the Smart Battery
IC within the battery pack should be calibrated in order to get
accurate reporting of remaining battery life status.
To calibrate the battery pack follows the instructions below:
1. Insert the battery into the battery compartment and turn on the
computer. If the battery is completely without power go to the
next step. Otherwise, let the battery run down until the battery
low-low warning beeps are heard.
The system will automatically enter Suspend mode.
2. Turn the computer off. Connect the AC adapter and let the
battery fully recharge. When the battery charge indicator turns
off, the battery is fully charged.
3. Turn On the computer, let the battery run down until the
battery is in low-low state and you hear a warning beeps. The
system will automatically enter the Suspend mode. You can
now connect the AC adapter.
4. The battery pack is now calibrated properly.
In general, using the battery until the low-low battery-warning
indicator appears and fully recharges the battery each time (full
discharge/charge cycle) will ensure the accurate reporting of the
battery gauge status.
Automatic Battery Pack Charging Function
You can automatically charge the battery pack by using the AC
Adapter. The charge time is about three hours when the computer
power is turned off. The following table summarizes the charging
modes:
Charge Mode
Fast
Pre-Charge
Charge Time
3 hours with the system off or in Suspend mode.
The temperature must be 25°C or below room
temperature.
A pre-charge is supplied to the Li-Ion battery pack.
Battery Status
Windows XP has an applet in the Control Panel that will display an
icon in the Windows taskbar indicating when the computer is
running on battery power or is attached to the AC adapter.
24
This applet also displays a meter that indicates how much charge
is remaining in the battery.
Battery Low Warning
When the pack initially reaches the “Battery Low” state
approximately 10 ~ 15 minutes of the usable battery life is left.
You will hear an audible beep signal every 5 seconds alerting you
to the “Battery Low” status. When the battery power reaches the
“Battery Low Low” status the beeping sound will accelerate.
Your battery now has 1 ~ 2 minutes of battery charge remaining.
You must save your data or connect AC power immediately;
otherwise, you may lose your data.
Sound
Continuous
beeping every 5
seconds
Beeping
accelerates
Meaning
Battery Low: Indicates that there is 7 to 10 minutes
charge remaining.
Battery Low Low: Indicates that there is 1 to 2
minutes of battery charge remaining. Save your
work and turn off the computer, or connect the AC
adapter.
When there is only one minute of battery charge remaining, the
computer will suspend to the HDD and power off. You should
connect AC power and resume to save your work.
Small Battery for the Real Time Clock
There is a small built-in battery pack that supplies power to the
system in order to maintain certain system information while the
power is off. If the computer is left without a power source for long
period of time, this battery will be exhausted and system
information will be lost.
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions. Never remove the
battery pack while the power is on as this may result in data loss
when the system loses power.
B ATTERY CALIBRATION
The purpose for this process is to provide a longer battery life for
your system battery pack.
25
1.
2.
3.
4.
5.
6.
Turn on the computer, when the text appears, press [Del] or
the [Delete] key until the system enters the BIOS Setup screen,
you may now make the necessary changes.
Press the è arrow key until it reaches the “Exit” menu screen.
Again press the ê arrow key and select the “Battery
Calibration” item.
Press the [Enter] key and disconnect the AC adapter then
press the [Y] key until you hear continuous battery low-low
warning beeping sounds.
The system will be fully discharge and shutdown completely.
Connect the AC adapter and let the battery fully recharge. The
“Battery Charge LED” of the computer will light indicating it is
in charging status.
When the battery charge LED turns off will indicate the system
is fully charged.
Repeat step 1 to 4 once again.
The battery is now fully calibrated.
RESETTING THE SYSTEM
After installing a software application package, you may be
prompted to reset the system to load the changed operating
environment. To reset the system, or “reboot,” press the
[Ctrl]+[Alt]+[Delete] button. This is known as “warm boot.” This
key combination acts as “software” reset switch when you
encounter hardware or software problems, which lock up the
computer.
ADJUSTING THE BRIGHTNESS
To adjust the brightness on the LCD screen, use the brightness
adjustment button located at the right sides of the system. Press
on the + knob to increase and – knob to decrease the brightness of
your LCD display.
26
USING THE PEN
You can use the pen to generate, to select items, and to navigate
through programs on the Tablet PC.
• Hold the pen as if you were writing
with a standard pen.
• The pen interacts with the computer
whenever the tip of the pen
touches the screen.
Programs
that
support
handwriting
recognition also allow you to write
characters directly on the screen with the
pen. You can also use the pen as a drawing
tool.
The pen is a sophisticated, high-quality electronic instrument that
can be damaged if used improperly. Things to follow to protect
your pen:
• Do not gesture with the pen, use it as a pointer, or tap it on
surfaces other than the Tablet PC screen.
• Do not try to store the pen with the tip down (as you would
normally do with a pen) that it might distort the internal
mechanism. To avoid any damage to the pen, store it only in
the pen holder when you are not using it.
WRITING AREA
Any area where you can enter handwriting to be converted into
typed text and inserted in a program. Input Panel contains two
writing areas, one on the writing pad and one on the character pad.
USING THE SCREEN KEYBOARD
Press on the “Keyboard” icon to display the screen keyboard on
your screen in case you would make an input to the system.
ON SCREEN KEYBOARD
The keyboard in Input Panel. Use it the same way that you would
use a standard keyboard.
27
WRITING PAD
A pad that you use to write text that is converted into typed text.
You write on lines in the writing pad the same way you write on a
lined piece of paper.
CHARACTER PAD
A pad that converts your handwriting into text so that it can be
inserted into a program. You use the character pad to write on
letter at a time.
To enhance your writing capability, click on the “Num” and “Sym” to
display the on screen “Numeric” and “Symbol” keys respectively.
To make a selection on how it will be proper for the on-screen
keyboard to illustrate on your display, a special function is design
to solve all these problem.
Press on this icon to display the selection item for the
on-screen keyboard to appear on the screen.
Speech
By using a microphone, you can speak to your tablet computer
either to dictate or give commands.
Dock at Top of Screen
Let the on-screen keyboard to appear at the top of the screen.
28
Dock at Bottom of Screen
Let the on-screen keyboard to appear at the bottom of the screen.
Undock
Closed down the on-screen keyboard.
Options
• General – Provides you which action to be taken when
opening the Input Panel
• Settings – Lets you select the option on how the insert
button to appear on your display
• Character Pad – Lets you select on the ink thickness of the
text and the spaces between them
• Writing Pad – Lets you select on the thickness of the text
and the spaces between every written lines
• Speech – Sounds provide useful validation during speech
recognition
TOUCHKIT UTILITY
After you have restarted Windows, select and double click the
“Touchkit” icon on the desktop. Touchkit utility provides some
useful function for adjustment where you can easily manage all the
controllers through the Touchkit utility.
29
Some questions on how to use the Touchkit application; please refer
to the online “Help” for detail.
PEN C ALIBRATION
If your cursor pointer does not function well, you can select the
“Calibration” tap “4 pts Cal” button or “Advanced” tap -> 25 pts
Cal” button and click it to correct point locations.
C ALIBRATION < 4 PTS CAL >
Correct 4 point locations on the screen with the panel, screen
displays as follows: Touch the blinking symbol on panel until it
stops blinking.
ADVANCED < 25 PTS CAL >
25 point calibration is more accurate for touch sensor. In general
case, it does not need to do 25 points calibration other than bad
linearity sensor.
30
USING THE WINDOWS
HELP WINDOWS
For Windows XP help, click Start èHelp and Support icon will
open the dialog box.
DESKTOP
Desktop may vary differently on the software installed in your
computer with different or additional shortcuts.
31
Recycle Bin
Used for storing deleted files in case you want to recover and save
it in your system. The files will only be deleted from the Recycle
Bin permanently only if you empty it by right clicking your mouse
and select the “Empty Recycle Bin”.
Start Button
Allows easy access to all
The Start menu allows
Windows programs.
you to adapt and show
the programs used most
frequently. If you wish to
keep an item, right click
the item and click Pin to
Start menu.
Log Off will enable the
current user to log off and
allows a new user to log
on.
Turn
Off
Computer
allows you to shut down,
restart, and Stand by
modes for power saving
purposes.
32
Taskbar
When you open a program, its icon is displayed at the taskbar for
you to conveniently move between programs by clicking the
relevant button.
To add or remove toolbars from the taskbar: right click an empty
spot on the taskbar, select Toolbars è choose the toolbar you
want to add.
Notification
The icons that appear here are for quick access to some programs
and computer functions that you frequently used. For you to see
the hidden icons, simply click the icon.
To prevent Windows XP from hiding icons:
From an empty spot on the Taskbar, right click your mouse and
select the Properties, remove the checked mark on the Hide
inactive icons.
CONTROL P ANEL
It is in this area that you can change how Windows looks and
works. Click Start è Control Panel dialog box. There are two
interfaces – Classic View or Category View.
33
34
Desktop Operation
Your computer is capable of providing you with efficient and
productive mobile computing, it also has the speed and capacity to
service as a desktop system.
This chapter discusses those functions of your computer that are
typical of desktop systems.
AUDIO
THE MULTIMEDIA SOUND SYSTEM
The computer’s built-in audio capabilities allow you to take
advantage of a wide range of education and entertainment
multimedia software. The computer is equipped with an internal
stereo speakers, a microphone, and output audio ports for external
audio units.
An external microphone can be connected to the microphone jack.
External speakers or headphones can be connected to the
computer’s audio-out jack.
• External audio devices can be connected to the Line in jack.
All audio features are software controlled.
AUDIO V OLUME CONTROL
To control the volume of your computer, use the volume control on
the Windows. (Click on the Start è Control Panel è Sounds,
Speech, and Audio Devices è Sounds and Audio Devices è put
a check mark on the “Place volume icon in the taskbar” in the
“Sounds and Audio Devices Properties” window display and click
the “OK” button.
35
AUDIO SOFTWARE
Your computer comes equipped with an integrated sound system
capable of providing you with quality audio sound through the builtin speakers or through external speakers connected via the system
ports.
36
SOUND RECORDING
Your system allows you to record sounds and store them as files
using the microphone via the microphone jack of the computer.
Check the Windows Help and Support Center in Windows for
information on using the various elements in sound recording.
For a high-quality sound, click on the "Volume Control" at
the lower right end of your screen. From the Volume Control
windows, click on the "Advanced" tab, click and select the
"Microphone Boost" item.
PLAYING SOUND FILES
Your computer can play audio files stored in MIDI, WAVE or MP3
file format. Check the Help and Support Center in Windows for
information on the functions of the Media Player.
EXTERNAL SPEAKERS AND MICROPHONE
The sound system is capable in providing high-quality sound to
external speakers and receiving and processing sounds from an
external microphone or external sound source.
37
Page intentionally left blank
38
Internet Connection (Optional)
There are numerous ways to connect to the Internet. This may vary
from the user’s working environment as well as system
specifications.
• Using a wired LAN
• Using a wireless LAN (Optional)
USING A WIRED LAN FOR CONNECTION TO INTERNET
For you connect to the Internet, a wired LAN environment normally
uses the company’s LAN or a broadband modem.
1. Use the network (LAN) cable to connect to the LAN port of the
system.
2. Select on “My Network Places” and click on the “View Network
Connection” in the “Control Panel” window.
3.
In the “Network Tasks” window, use your mouse pointer to
click on the “Local Area Connection”.
4.
Select “Properties” from the popup menu that appears
39
5.
40
In the “This connection uses the following items” field, select
“Internet Protocol (TCP/IP), and click “Properties”.
6.
Enter the system’s IP and DNS server addresses on the
General tab of the “Internet Protocol (TCP/IP) Properties”
window. If DHCP is used, click “Obtain an IP address
automatically” and “Obtain DNS server address automatically”
on the General tab.
41
7.
After all the all the information are correctly entered in the
“Internet Protocol (TCP/IP) Properties” window, click “OK” to
finish.
USING BOTH DHCP AND STATIC IP FOR CONNECTION TO
INTERNET
When you are alternatively using networks with either DHCP or
static IP addressing, you can use alternative settings that enable
simultaneous configurations of DHCP and static IP to use both of
the network connects without reconfiguring.
1. Follow the steps mentioned when you are using wired LAN
connection from 1 to 7.
2. Click on the “User configured” and enter the appropriate
values in the “Alternate Configuration” tab.
42
3.
When you have completed the entire configuration, click “OK”.
43
USING WIRELESS LAN NETWORK FOR CONNECTION TO INTERNET
(MICROSOFT ’S SERVICE P ACK 2) (OPTIONAL )
BLUETOOTH CONNECTION
Bluetooth is a developing, world wide, open, short-range radio
specification focused on communication between the Internet and
Net devices, plus it defines communication protocols between
devices and computers.
It connect wirelessly to your world: In home, at work, in motion and
at play.
Access the internet or your e-mail account from anywhere, anytime.
Fast downloads.
44
Press on the Bluetooth icon to connect other devices that has
this application.
45
Page intentionally left blank
46
Running BIOS Setup
The BIOS (Basic Input and Output System) Setup program is a
menu driven utility that enables you to make changes to the
system configuration and tailor your system to reflect installed
hardware or alter system performance. When the computer is
turned back on, the system is configured with the values stored in
CMOS. With easy-to-use menus, you can configure such items as:
• Hard drives and peripherals
• Boot up Drive Sequence
• Password protection
• Power Management Features
The settings made in the BIOS Setup program intimately affect
how the computer performs.
N AVIGATING THROUGH BIOS SETUP
The Setup program has been designed to make it as easy to use
as possible. If you accidentally make a setting and don’t know
which one to switch back to, the Setup program has a hot key that
allows you to return to the previous value.
ACCESSING THE BIOS SETUP PROGRAM
To access the BIOS Setup program, press the DEL key after the
computer has run through its POST.
ITEM SPECIFIC HELP
On the right side of the Setup screen is an area labeled Item
Specific Help. This area will list navigation key shortcuts and
information that is specific for the item that you are currently editing.
47
THE MENU B AR
The top of the screen has a menu bar with the following selections:
Main - Use this menu to make changes to the basic system
configuration.
Advanced - Use this menu to enable and make changes to the
advanced features available on your system, such as enabling the
FIR module.
Security - Use this menu to set a password. The password allows
bootup and controls access to the BIOS setup menu.
Boot - Use this menu to configure the default system device used
to locate and load the Operating System and for booting up the
computer.
Exit - Use this menu to exit the current menu or specify how to exit
the Setup program.
To access the menu bar items, press the right or left arrow key on
the keyboard until the desired item is highlighted.
THE LEGEND B AR
At the bottom of the Setup screen you will notice a legend bar. The
keys in the legend bar allow you to navigate through the various
setup menus. The following table lists the keys found in the legend
bar with their corresponding alternates and functions.
Legend
Key
Function
F1
Displays the General Help window. It can
be enabled from anywhere in the BIOS.
Esc
Jumps to the Exit menu or returns to the
Main menu from a submenu.
←
Selects the menu item to the left.
→
Selects the menu item to the right.
↑ or ↓
Keypad
arrow keys
Moves the cursor up and down between
fields.
Tab
Enter
Moves the cursor to the next position
available in the field.
Minus
key (-)
48
Alternate
Key
Scrolls backward through the values for the
highlighted field.
Legend
Key
Alternate
Key
Plus key
(+)
Function
Scrolls forward through the values for the
highlighted field.
Home
PgUp
Moves the cursor to the field at the top of the
window.
End
PgDn
Moves the cursor to the field at the bottom of
the window.
F9
Sets the parameters for the current menu to
their default values.
F10
Save and Exit.
Enter
Will select a sub menu or show a range of
options for a field.
L AUNCHING SUBMENUS
Note that a right pointer symbol u appears to the left of certain
fields. This pointer indicates that a submenu can be launched from
this field. A submenu contains additional options for a field
parameter. To call up a submenu, simply move the cursor to
highlight the field and press the [Enter] key. Use the [Esc] key to
return to the Main menu.
GENERAL HELP
In addition to the Item Specific Help window, the BIOS Setup
program also provides a General Help screen can be called up
from any menu by simply pressing [F1]. Use the [PgUp] and [PgDn]
keys or the up and down arrow keys (↑↓) to scroll through the
entire help document.
Press the Home key to display the first page, press End to go to
the last page. To exit the help window, press the [Enter] or the
[Esc] key.
Save Changes and Exit the Setup Program
Refer to the Exit menu section of this chapter for detailed
information on saving changes and exiting the setup program.
49
THE M AIN MENU
When the Setup program is accessed, the following screen
appears:
50
THE ADVANCED MENU
Selecting Advanced from the menu bar displays the Advanced
menu:
51
THE SECURITY MENU
The computer’s advanced system of security allows you to set a
password to prevent unauthorized access to system resources,
data, and the BIOS Setup Program.
52
THE BOOT MENU
The Boot menu allows the user to specify the order in which the
computer is to check for a device to boot the system. You can also
configure the way that the system will boot up.
To make changes, select Boot from the menu bar. The following
screen appears:
53
THE EXIT MENU
Once you have made all of your selections from the various menus
in the Setup program, you should save your changes and exit
Setup. Select Exit from the menu bar to display the following menu:
54
VGA Utilities
VGA UTILITIES
After you have restarted Windows, open the “Control Panel” and
double click on the “Display” icon. From the “Display Properties”
window, select the “Settings” tab and click on the “Advanced” tab
to enter the “Digital Flat Panel (1024x768) on Mobile Intel (R)
915GM/GMS,910GM" window.
55
INTEL (R) GRAPHICS MEDIA ACCELERATOR DRIVER FOR
MOBILE
56
57
58
Video Conferencing (Option)
This application offers video conferencing capabilities to work and
communicate in real-time with one or more participants through
streaming video, from any location. You can click on the icon on
the Windows screen display to run the capture application.
APPLICATION
Use the hot key of [Fn] + [F6] to capture the image that appear
on your application’s screen. You are allowed to capture the image for a
number of times until you save it by selecting the “Set Capture File… ” in
the “File” menu.
59
USING COMMANDS AND BUTTONS
The File Menu Commands and Buttons
• Set Capture File - Set
to save directory and
video file name.
• Exit - Exit the
application.
The Device Menu Commands and Buttons
This set the size of the window screen of your capture application
60
The Options Menu Commands
• Preview - Set preview in screen
or not.
• Video Capture Filter - Set
Properties.
• Video Capture Pin - settings of stream format.
You can set the corresponding feature for Environment, Frequency,
Rotation and Extension of your captured image file.
Ø
Ø
Brightness/Contrast/Hue/Saturation/
Sharpness/Gamma/White Balance/Backlight Comp
- To adjust video settings and show value.
Default - Reset all settings in this page to default.
61
Ø
Exposure - De-select the check mark on the box if
you want to change the value.
Ø
Frame Rate - This function is to set video frame rate.
If your utility rate of CPU is too high, you can choose
the low frame rate to reduce the CPU’s utility rate.
Output Size - Change the output size.
Ø
62
Capture Menu Commands and Buttons
• Start Capture - start
capture video
stream.
• Stop Capture - stop
capture video
stream.
• Set Frame Rate - set frame rate while capturing a video.
• Set Time Limit - set time limit of capture stream.
63
Page intentionally left blank
64
Troubleshooting
This chapter describes locating and solving problems that you may
encounter while using your computer.
CHECKING C ABLES AND CONNECTIONS
Start by performing a careful visual inspection of the exterior of the
computer. If no LEDs are illuminated, make sure that your
computer and its peripherals are getting power and communicating
with each other properly.
To check the power cables, and connections:
1. If you have been using battery power, connect the computer to
an external power source and make sure that the battery has
a charge.
2. If you are using the computer with the AC adapter, check the
power outlet, the power cord, and any power switches that
may affect your computer.
3. Check the wall outlet or power strip with an item that you know
is functioning properly. A lamp or radio is a convenient item for
checking the power. You may also need to check the fuses
and breakers in your electric box.
4. If the outlet is controlled by a wall switch, make sure that the
switch is on.
5. If the outlet is controlled by a dimmer switch, use a different
outlet.
6. If your computer is plugged into a power strip with an On/Off
switch, make sure the switch is on.
7. With the computer’s power switched off, check all cable
connections. If the computer is connected to any peripheral
devices, look for loose or disconnected cables.
65
If the computer is too close to a wall, a cable connection may be
loose or the cables may be crimped.
Do not substitute cables for different devices (other than
the manufacturer recommended cables) even if they look exactly
alike. The wiring inside the cable may be different.
8.
When you are certain that you have power available and all
connections are good, turn the computer on again. If the
computer still does not start, you may have a hardware
problem.
GENERAL PROBLEMS
A few common hardware problems and suggested solutions are
presented in the table below:
SYSTEM NOT RESUMING OPERATION
If the system will not resume operation after system operation has
been suspended, check the following possible causes:
The battery may either be defective, or discharge to a critically low
level. To correct this problem, connect an external power supply
such as AC adapter.
DISPLAY SCREEN IS BLANK OR DIFFICULT TO READ
If the system is blank or unreadable, please confirm the system is
running (this can be seen on the Power icon if it is lit).
• The brightness control may be set too low, change the
brightness by using on the brightness control at the right
side of the system.
• The video timeout may have expired, tap on the display
screen to reactivate the display.
T ABLET PC IS NOT RESPONDING TO THE PEN
If the Tablet PC does not respond to the pen, connect an external
keyboard to the system to see if it responds to keyboard
commands. If the system doesn’t respond to a keyboard, the
application or system may have crashed, and it may be necessary
to reboot the system. If the system responds to a keyboard but not
to a pen, contact your local dealer for further assistance.
66
THE T ABLET PC CAN NOT POWER ON
Check on the Lock key located right beside the Power button if it is
in lock position.
THE CURSOR NOT IN POSITION WHILE USING THE ORDINARY PEN
Change the settings in the touchkit settings window. Select
TouchKit program>4 pts Cal to calibrated.
THE COMPUTER IS UNABLE TO CONNECT TO THE INTERNET .
Account for Internet service provider (ISP) is not properly
configured. Ask for your ISP assistance.
NO SOUND ON THE EXTERNAL SPEAKERS OR HEAD PHONES.
Connected to the wrong jack. Change to the correct jack.
BEEPING SOUND.
Connect the computer to an external power source immediately.
IF THE CURSOR IS NOT IN POSITION WITH THE TOUCH PEN
Please make sure you have made the linearization with the
touchkit utility. Please refer to Chapter 4 on the topic of calibration
to correct in aligning the cursor with the pen.
CONTACTING YOUR DEALER
If you still have a problem after reading the preceding sections, the
next step is to contact your dealer. Your dealer can determine if
the problem is something that requires the computer to be taken to
the shop. Before you call your dealer, however, prepare the
following information:
•
•
•
•
How is your computer configured? Your dealer needs to
know what peripheral devices you are using.
What messages, if any, are on the screen?
What software were you running at the time?
What have you done already to try to solve the problem? If
you have overlooked a step, your dealer may be able to
solve the problem over the phone.
67
Page intentionally left blank
68
Specification
DETAILED SPECIFICATIONS
Processor
• Value - Intel® Celeron® M ULV 900MHZ, L2 cache=512KB
on die, FSB=400MHZ
• Premium - Intel® Pentium® M ULV 1GHZ, L2 cache=2MB
on die, FSB=400MHZ
Operating System Compliance
• Microsoft® Windows® XP Tablet Edition
• Microsoft® Windows® XP Home/ Professional Edition
Core Logic
• Intel 915GMS+ ICH6-M
Memory
• Value - DDR2 400, SO-DIMM SDRAM module, 256MB
• Premium - DDR2 400, SO-DIMM SDRAM module, 512MB
LCD Display
• 7" WVGA (800x480) TFT LCD
Video & Graphics
• Integrated graphic controller: Intel GMA900, SMA up to
128MB DDR2 SDRAM
Hard Drive
• Value - 1.8" 30GB, 4200rpm
• Premium - 1.8" 60GB, 4200rpm
69
Card Reader
• 3-in-1 card reader (Support SD/SDIO/MS/MMC)
Camera
• 1.3M pixel CMOS Camera
Pointing Device
• Touch screen with Stylus Pen, Synaptics pointing stick
Application Launch Key
• Camera, Movie, Internet, Ctrl+Alt+Del
LED Status Indicator
• Power, HDD, Battery, WLAN
IO Ports
• USB 2.0x2, Audio in, Earphone, DC in
Audio
• HD 7.1 channel Audio, Built-in speaker and microphone
AC Adapter
• 50W
Battery
• 3 cell Li-ion battery pack 11.1V 2400mAh
BIOS
• AMI, Support PnP,
• Support PnP, password
Communication
• Bluetooth Module
• 802.11b/g WLAN card (LR802UWG/Qcom) and Bluetooth
V1.2 Card(QBTM300/Qcom)
Power Management
• ACPI 2.0 compliance
• Support Stand-by, Suspend to Disk, Suspend to RAM
Size
• 225.5x144x.23/25mm
Weight
• 830g
70
Accessories
Quick Guide, Support CD (Driver, Utility, Manual), AC
Adapter, Power Cord, Battery Pack
Remark
• Battery life will vary depending on your specific hardware
and software configuration
• Spec subject to change without notice
•
71

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2006:03:06 18:02:40Z
Modify Date                     : 2006:03:07 09:26:00+08:00
Page Count                      : 81
Creation Date                   : 2006:03:06 18:02:40Z
Author                          : Cathy
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Mod Date                        : 2006:03:07 09:26:00+08:00
Metadata Date                   : 2006:03:07 09:26:00+08:00
Title                           : H70 _e_v2.doc
Creator                         : Cathy

EXIF Metadata provided by EXIF.tools