Contents
- 1. User Manual
- 2. User manual
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1790941 |
| Application ID | PeiiH2UyVQUFGbDo6OauTg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.98kB (662246 bits) |
| Date Submitted | 2012-09-13 00:00:00 |
| Date Available | 2013-04-19 00:00:00 |
| Creation Date | 2012-08-22 12:52:19 |
| Producing Software | Acrobat Distiller 8.3.1 (Windows) |
| Document Lastmod | 2012-09-07 10:51:36 |
| Document Title | User manual |
| Document Creator | Word 用 Acrobat PDFMaker 8.1 |
| Document Author: | yoko matsumoto |
■ Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including VP Receiver VPR-1 amplifiers) that produce heat. The lightning flash with arrowhead symbol, within an equilateral INSTRUCTION MANUAL triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of Please read this instruction manual carefully before using this SA 1965 sufficient magnitude to constitute a risk of electric shock to persons. This marking is located at the bottom of product. product and keep it for future reference. The exclamation point within an equilateral triangle is intended to alert IMPORTANT SAFEGUARDS the user to the presence of important operating and maintenance SA 1966 ■ Read Instructions (servicing) instructions in the literature accompanying the product. All the safety and operating instructions should be read before the product is operated. ■ Retain Instructions WARNING: The safety and operating instructions should be retained for future reference. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. ■ Heed Warnings All warnings on the product and in the operating instructions should be adhered to. FCC CAUTION: ■ Follow Instructions Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to All operating and use instructions should be followed. operate the product. ■ Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for ■ FCC & IC statement ■ cleaning. IMPORTANT NOTE: ■ Attachments This Class B digital product complies with Canadian ICES-003. Do not use attachments not recommended by the product manufacturer as they may cause hazards. This product complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject ■ Water and Moisture to the following two conditions: (1) this product may not cause interference, and (2) this product must accept any interference, Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, including interference that may cause undesired operation of this product. or near a swimming pool, and the like. This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC ■ Placement Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the instructions, may cause harmful interference to radio communications. manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should However, there is no guarantee that interference will not occur in a particular installation. use a mounting accessory recommended by the manufacturer. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product ■ Ventilation off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it —Reorient or relocate the receiving antenna. from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the —Increase the separation between the equipment and receiver. product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. —Consult the dealer or an experienced radio/TV technician for help. ■ Power Sources When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15 to 5.25GHz This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the frequency range. type of power supply to your home consult your appliance dealer or local power company. For products intended to operate The FCC requires this product to be used indoors for the frequency range of 5.15GHz to 5.25GHz to reduce the potential for from battery power, or other sources, refer to the operating instructions. harmful interference to cochannel mobile satellite systems. ■ Grounding or Polarization High-power radar is allocated as the primary user of the 5.25 to 5.35GHz and 5.65 to 5.85GHz bands. This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a These radar stations can cause interference with and/or damage to this product. 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only In some environments, the use of wireless devices may be restricted. one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still Such restrictions may apply in hospitals, near explosives, in hazardous locations, and so on. fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. The If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. 3-wire grounding type plug will fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding FCC Radiation Exposure Statement: type plug. This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product should be ■ Power-Cord Protection installed and operated with minimum distance 20cm between the radiator & your body. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware ■ Lightning programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, Radiation Exposure Statement: unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to This product complies with Canada radiation exposure limits set forth for an uncontrolled environment. This product should be lightning and power-line surges. installed and operated with minimum distance 20cm between the radiator & your body. ■ Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. shock. Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux appareils ■ A product and cart combination should be moved with care. radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de Quick stops, excessive force, and uneven surfaces may cause brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est the product and cart combination to overturn. susceptible d'en compromettre le fonctionnement. ■ Object and Liquid Entry Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le ■ Servicing fonctionnement. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other La bande 5 150-5 250 MHz est restreints à une utilisation à l’intérieur. hazards. Refer all servicing to qualified service personnel. ■ Damage Requiring Service Déclaration d'exposition aux radiations: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: Cet équipement est conforme aux limites d'exposition aux rayonnements Canada établies pour un environnement non -When the power-supply cord or plug is damaged. contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et -If liquid has been spilled, or objects have fallen into the product. votre corps. -If the product has been exposed to rain or water. -If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by NOTICE: the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive - Do not use this product outside your Country. work by a qualified technician to restore the product to its normal operation. - Depending on the specification of the HDMI device, this product may not work properly or there may be some effect on -If the product has been dropped or damaged in any way. performance with this product. -When the product exhibits a distinct change in performance - this indicates a need for service. - Compatibilities with supporting models were confirmed in our environment. ■ Replacement Parts We do not guarantee operation in all environments. When replacement parts are required, be sure the service technician has used replacement parts specified by the - Depending on the devices to be used with this product, CEC function may not be used. manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock - Because wireless connection takes a time in the low temperature environment, please use after switching it on and waiting or other hazards. for a while.. ■ Safety Check - Product design and the specification are subject to change without prior notice. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. - All other company/products names described in this manual are trademarks or registered and trademarks of respective companies. are trademark of ELMO Co., Ltd. Selecting the Video Source SUPPLIED ITEMS Display the menu by pressing the Menu/Select button. Contact your dealer if any of the following items are not included in the package. A list of registered Visual Transmitters appears in the menu. Select the desired Visual Transmitter. Press the Menu/Select button to output the image of the selected Visual Transmitter. When the message of “Please remove and register this ○○○ again” is shown at linking with the transmitter, please remove and add the transmitter again. VP Receiver AC adapter Instruction Manual Warranty Card SLEEP MODE OPERATION PROCEDURES The VP Receiver enters Sleep mode in 3 minutes after the wireless connection with the Visual transmitter is disconnected. To return to normal operation mode, press one of either the Menu/Select button, the Down button or the Up button of the VP Part Names Receiver after power on the Visual transmitter. 1. Micro USB power port : AC adapter terminal. The image appears once the wireless connection with the Visual transmitter is established. 2. Menu/Select button : To display or select menu. To open the menu while "Linking" image is in display, press the Menu/Select button for long. 3. Up button : To scroll up menu items. Perform the wireless settings after the menu is displayed. 4. Down button : To scroll down menu items. TROUBLESHOOTING 5. HDMI port : HDMI output terminal. 6. Link light : LED to indicate the connection status If trouble occurs or you have any queries, first check this section. with the Visual transmitter. 7. Power light : LED to indicate the power supply condition. If the problem persists, check your warranty and contact the dealer where you purchased the product. The AC adapter is disconnected. Check the connection between the AC adapter and ■Link light (Blue) the wall outlet. ・Lit : Already matching with the Visual transmitter. Is the Visual transmitter registered? ・Blink : Searching WHDI input signal. Add the Visual transmitter. ■Power light (White) The VP Receiver does not work. ・Lit : Power is ON. ・Off : Power is OFF. ・Blink : Sleep mode. Cancel the Sleep mode according to the instruction described in “SLEEP MODE”. The equipment which uses the same frequency may cause radio interference. Check the surrounding radio frequency environment. ・Please remove the protection sheet of the VP Receiver before you use. The AC adapter is disconnected from the VP Receiver. ・The Micro USB terminal of the VP Receiver is for power supply only and other USB devices cannot be Check the connection between the AC adapter and the VP Receiver. connected. Use the supplied AC adapter to supply power to the VP Receiver. Do not use the bus powered Caution The VP Receiver is in Sleep mode. HDMI cable is not connected properly. USB to supply power to the VP Receiver. The power consumption of the VP Receiver is higher than the Firmly insert HDMI cable into the connector. standard of the USB bus power. The cable is damaged. ・Use the Visual transmitter that supports WHDI standard. No image is displayed. ・HDMI output of this product complies with HDMI standard. or ・Because wireless connection takes a time in the low temperature environment, please use after switching it The image is distorted. on and waiting for a while. Do not use a damaged cable. The input signal is out of the display range of the Visual transmitter. Check the resolution. The equipment which uses the same frequency may cause radio interference. Check the surrounding radio frequency environment. Connecting the VP Receiver HDMI cable is not connected properly. Connect the equipments as shown in the drawing. Firmly insert HDMI cable into the connector. The cable is damaged. Monitor (*2) No sound is output. WHDI Do not use a damaged cable. No audio from the Visual transmitter is input. No sound is output when there is no audio input. The volume of the Visual transmitter or the image output device is set to minimum. Turn up the volume. HDMI Connector Visual transmitter VP Receiver ・When error message appears, follow the instruction to fix the error. AC adapter (*1) Caution ・If the problem persists, the product may be defective. Contact the dealer where you purchased the product for repair. To an electric socket PRODUCT SPECIFICATIONS Projector (*2) HDMI cable (*3) HDMI out USB power Operating Temperature 0℃ - 40℃ (32°F – 104°F) Wireless Band Used 5190MHz - 5795MHz Communication Distance *1 AC adapter is different according to the destination. Caution *2 Change the input mode of the image output device to HDMI. Perform the wireless settings before using the VP Receiver. AC adapter Input: 100V-240V, 50/60Hz(0.5A:USA/JAPAN, 0.3A:Others) Standards HDMI / WHDI standard compliance, including HDCP Transmitter registration 8 sets Output: 5V, 2A Image output: Connect the Visual transmitter that supports HDMI before performing the wireless settings. Display the menu by pressing the Menu/Select button. Select “Setup”, then press the Menu/Select button again. You can add/remove or modify the name of the Visual transmitter from the menu. VGA (640x480)60Hz/75Hz, SVGA (800x600)60Hz/75Hz, XGA (1024x768) 60Hz/75Hz, HDMI OUT (Type A) 2. Select “Add new Video Source” from the menu. Then press the Menu/Select button. 3. The VP Receiver is now ready to receive signals from the Visual transmitter. Perform the registration from the Visual transmitter. 4. The VP Receiver registers the Visual transmitter once the signal from the Visual transmitter is received by WXGA (1280x768) 60Hz, WXGA (1280x800) 60Hz, SXGA (1280x1024) 60Hz/75Hz 1152x864 (60Hz), 1280x960(60Hz) 480p, 576p, 720p, 1080i, 1080p Audio output: 192 kHz x 24 bit ■Add the Visual transmitter 1. Select “Setup”. Then press the Menu/Select button. (differs depending on the usage conditions) Power Supply *3 Use a commercially available HDMI cable (Type A). Performing the wireless settings Approx. 10m (32.8feet) Power Consumption (Current) External Dimensions Weight 5.5W( 5V / 1.1A) without AC adapter (USA / Canada) 7W( 5V / 1.4A) without AC adapter (Europe / Eurasia) L83 x W80 x H31 (mm) L3 1/4” x W3 1/8” x H1 1/4” 110g (0.24lb) the VP Receiver. 5. Select “OK” and press the Menu/Select button. Then exit the menu. ・For details about the operation of the Visual transmitter, refer to the instruction manual of the respective Caution Visual transmitter. ■Remove the Visual transmitter 1. Select “Setup”. Then press the Menu/Select button. 2. Select “Remove Video Source” from the menu. Then press the Menu/Select button. 3. Select the Visual transmitter to remove. Then exit the menu. 4. Select “OK” and press the Menu/Select button. Then exit the menu. ■Modify the name of the Visual transmitter 1. Select “Setup”. Then press the Menu/Select button. 2. Select “Modify Video Source Name” from the menu. Then press the Menu/Select button. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan ELMO USA CORP. Headquarters 3. Select the registered Visual transmitter. Then press the Menu/Select button. 4. A cursor is displayed. Select the part you want to modify. Then press the Menu/Select button. 5. Select a letter once the color of the cursor changes. 6. Press the Menu/Select button after selecting a letter to input. 7. Press the Menu/Select button for long after all the letters has been input. Select “Save” to finish. West Coast Branch 1478 Old Country Road Plainview, NY 11803 U.S.A. Tel:+1 (516) 501 1400 Fax:+1 (516) 501 0429 E-mail: elmo@elmousa.com Web: http://www.elmousa.com 5676 Corporate Avenue Cypress, CA 90630 U.S.A. Tel:+1 (714) 828 8457 Fax:+1 (714) 828 8429 ELMO Europe SAS Immeuble Elysées La Défense, 7C Place du Dôme, 92056 Paris La Défense, FRANCE Tel:+33 (0) 1 73 02 67 06 Fax:+33 (0) 1 73 02 67 10 VPR-1(E)_M R3-Xdx
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2012:08:22 12:52:19+10:00 Creator Tool : Word 用 Acrobat PDFMaker 8.1 Modify Date : 2012:09:07 10:51:36+08:00 Metadata Date : 2012:09:07 10:51:36+08:00 Producer : Acrobat Distiller 8.3.1 (Windows) Format : application/pdf Creator : yoko matsumoto Title : Document ID : uuid:e8fe9cdc-5c8d-42c5-b1d6-284bddfda695 Instance ID : uuid:b939e5bf-5c77-45ca-a8f4-39793a5eb1e2 Company : Microsoft Page Count : 2 Page Layout : OneColumn Author : yoko matsumotoEXIF Metadata provided by EXIF.tools