EM Tech EM-W100 MY THEATER User Manual

Changwon branch, EM-Tech. co.,Ltd MY THEATER

User Manual

EM-W100Product ComponentsNote: Check the package and read this manual carefully.Actual product design may differ form images shown in manual! CAUTION  Make sure authentic EM-Tech components are used. Using a non-authentic components may damage the product and thus void the warranty.Product Description  Battery Charging and Alerts Open the Charging port cover and connect your charger to the Charging port.LED Red Purple BlueBattery Status Charging 80 %CompletedBattery Status Sufficient Normal InsufficientLED Blue flashes three timesPurple flashes three timesRed flashes three times1 2 3 4 5Micro USB Charging CableWarranty Card  NOTE: To prevent hearing damage, you can hear the adjustment sound twice or longer from the upper 6 level when you adjust the volume (16 levels). 3.5mm AUXBluetooth Dongle(EM-AK100)⑨Speaker L1⑩Speaker L2①Power switch④LED②MIC1⑦Speaker R1⑥Jog button( Volume+ - / Previous Song / Next Song / Mode  change)⑤Call button⑪Play / Pause button ②MIC2⑧Speaker R2제품 보증서ContentsProduct ComponentsProduct DescriptionParts and Functions Battery Charging and Alerts EM-W100 Pairing and ConnectingLEDPlaying MusicMobile Calling FunctionsEM-W100 functionBluetooth ConnectionEM-AK100 Paring and ConnectingLED Functions of Connected DevicesOut of Communication rangeTroubleshooting(EM-W100) Troubleshooting(EM-AK100) Specifications (EM-W100)Specifications (EM-AK100)Precautions When Using the ProductImportant Safety Information!CAUTION  ●At extremely high or low temperatures, the device may or may not charge faster than usual.●You need to charge your device every six months to maintain functionality.●Rechargeable batteries have a limited life.Capacity will gradually be decreased with frequency of use and over time.●The life of the rechargeable battery depends on the storage method, usage conditions and usageenvironment.●To maximize the battery usage time, there are significant differences in sound volume and sound qualitywhen using the device with battery or using it with AC adapter.●Depending on the volume level, the power may be turned off regardless of the remaining battery level.●The equipment shall be connected to from power source is supplied by limited power sources.USB (USB. POWER) Charging by using the provided USB cable with AC adapter.①Power Switch-ON : Slide the Power Switch toward the ON position to turn onpower.- OFF : Slide the Power Switch toward the Off position to turn offpower."Power on" sounds when the unit is turned on and "Power off" soundswhen it is turned off.②MIC1, MIC2 : The MIC used for the call.③DC IN : Connects your mobile phone to AC adapter.④LED : Indicates charge status and Bluetooth device connectionstatus.⑤Call Button : When you hear a call, you can press the button tospeak to the speakerphone.⑥Jog Button:- Volume+- : Adjust the volume level when playing music.- Play Previous/Next Song: During playback, moves to the previous ornext song.- Acoustic vibe: Press and hold button for 2 seconds during playback.The Acoustic vibe changes and you can feel the Acoustic vibe changeaccording to the music when you wear it.(Pressing the jog button: Acoustic vibe On(Default) Acoustic vibeOff )Repeatedly pressing Acoustic vibe On (Default) Acoustic vibe Off⑦Speaker R1 : Right Speaker⑧Speaker R2 : Right Passive Speaker⑨Speaker L1 : Left Speaker⑩Speaker L2 : Left Passive Speaker⑪Play/Pause Button : Music play, pauseParts and Functions③DC IN USB Extension CableDetachable tapeUser ManualUser ManualPlease read the Important Safety Information for the proper use of this product. Store this User Manual in a place easily accessible to all users after reading. Misspelling errors or inaccuracies in the user manual are subject to change without prior notice by EM-Tech. Class B device (home broadcasting communication equipment)  : This device is for home (B) electromagnetic compatibility and is intended primarily for use in the home and is available in all regions.EM-W100--------------------------------------------------- 2--------------------------------------------------- 3--------------------------------------------------- 4-------------------------------------------- 5--------------------------------- 6~7---------------------------------------------------------------- 8--------------------------------------------------------- 9--------------------------------------------- 10----------------------------------------------------- 11------------------------------------------------- 12----------------------------------- 13-------------------------------------------------- 14--------------------------------- 14~17---------------------------------------- 18------------------------------------ 19~20------------------------------------ 21~22----------------------------------------- 23----------------------------------------- 24-------------------------------- 25----------------------------------------- 26Rev 1.0 KRAll rights reserved.Copyright © 2018 EM-Tech Co., Ltd..If you plug in the charger while the power switch is [ON], the power of [EM-W100] turns off. Turn the power switch to [OFF] again and slide it toward [ON] to turn on the power. If you slide the Jog Button toward the (-) or (+) direction for 2 seconds,You can check the battery status with voice and status LEDs.
78910 11EM-W100 Paring and Connecting[EM-W100] can easily register / connect via voice prompts.If you hear that the battery is insufficient, recharge the battery before proceedingwith pairing.If pairing is not completed within three minutes, the power automatically turns off.When power automatically turns off, slide the Power switch from the OFF to the ONposition to turn on the power again.Connecting Quickly1 Slide the Power switch toward the ON position to turn on power.2 The blue LED turns on and EM-W100 switches to Search mode.3 Select EM-W100 from your phone or a device to connect.4 When the connection is completed, the connection status is announcedby voice.5 Use the same process to pair EM-W100 with another device.Connecting Manually (connecting to other devices or reconnecting)Automatic Reconnection[EM-W100]is automatically connected to the last connected device. (The existingconnection to the phone has been established and the Bluetooth function of the phonemust be turned on.)If automatic reconnection does not work, find [EM-W100]on the device and connect itmanually.LEDEM-W100  Status DescriptionPower On Power LED blinks 4 times, battery LED blinks 3 times, LED blinks sequentially for connection status.Power Off The blue LED blinks 4 times.Search Mode The blue LED is on.Being connected Red and blue lights alternately blink.Connected The blue LED blinks once every 5 seconds.Call / Music  The blue LED blinks once every 5 seconds.Qualcomm® aptX™audioQualcomm® aptX™audio is a Bluetooth wireless technology that prevents loss of sound andprovides CD-quality audio. You can enjoy clear audio sound when listening to music andwatching movies)Qualcomm® aptX™audio works automatically only on the phones or the audio devices thatsupport Qualcomm® aptX™audio.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.Qualcomm® aptX™audio is a product of Qualcomm Technologies International, Ltd.!CautionPlease note that some devices may not be registered.!CautionIf automatic connection does not work, please try to connect from your phone or delete the registrationlist and re-register.Out of Communication RangeIf the device connected to EM-W100 is out of effective communication range (about 33feet/10meters), the signal becomes weaker and the communication can be lost.If the device comes back within the effective communication range within 10 minutes, theproduct will reconnect automatically to EM-W100.If it is not connected automatically, you can make a connection by trying to reconnect in BTenvironment setting.The auto reconnect function is not supported after 10 minutes, and it indicates that the red LEDblinks twice every 5 seconds.Playing MusicFunction DescriptionPlaying MusicBriefly press the Play/Pause button.Music will play on the connected device that is active. Pause Briefly press the Play/Pause button while playing music.Volume ControlSlide the Jog button toward the (+) position, the volume is increased by one level.Slide the Jog button toward the (-) position, the volume is decreased by one level.Play Previous SongSlide toward to (+) position (1 sec) while playing music.  Play Next Song Slide toward to (-) position (1 sec) while playing music.  Mode ChangePress and hold the middle of Jog button and it will change to the following mode with “Beep” sound. (Acoustic vibe On(Default) Acoustic vibe Off)Voice DialBriefly press the Call button while playing music. Turn on the voice recognition function. Briefly press the Call button again to cancel the voice dial. Mobile Calling FunctionsFunction How to useReceiving a Call/ Hanging upBriefly press the Call button.(For some mobile phones, the call is connected to the mobile phone when you receive a call. To connect a call to EM-W100, press the Bluetooth icon on the headset or press the (+) button on the EM-W100 for 2 seconds to switch the call )Making a CallWhen you make a call from your mobile phone, the call is automatically connected to [EM-W100].(Some phones need to switch the call by pushing in the (+) direction for 2 seconds .)Redial Press and hold the Call button for 1 second to dial the last number you called.Voice Dial Briefly press the Call button to make calls by Voice Dial.(Briefly press the Call button again to cancel the voice dial.)Switching adevicePress and hold toward (+)position (2 sec) while on the phone. (The call is switched to the mobile phone or [EM-W100]   every time you slide the button toward (+) positon.)Call in Progress, Accepting Another CallIf you press and hold the Call button for 1 second, you can receivean incoming call during a call.The existing call is put on hold. Press the call button again for 1 second to switch to the existing call.You can hang up a call or disconnect both calls by briefly pressing the call button.(It works differently depending on the phone setup.)Rejecting a Call Press and hold the Call Button for 2 seconds.Mute Press and hold (1 sec) the Play/Pause Button while on the phone.Briefly press the middle of the Jog Button while on the phone.Volume ControlSlide the Jog Button toward the (+) position, the volume increases           by 1 level.Slide the Jog Button toward the (-) position, the volume deceases by 1 level.6!NOTEReceiving or hanging up by Call button is not supported for the free call apps of Android series..EM-W100 Function Summary1 Slide the Power Switch to the ON position to turn it on.2 Press the Play/Pause button and Call button simultaneously for 2 seconds.3EM-W100 switches to Search mode.4 Select EM-W100 from the device list to connect.Function EM-W100 Status How to usePower On Power OffSlide the Power Switch toward the ON position to turn on power. Power Off Power On Slide the Power Switch toward the OFF position to turn on power. Volume Up Music in Play/ Call in ProgressSlide the Jog button toward (+) to increase the volume by 1 level.Volume Down Music in Play/ Call in ProgressSlide the Jog button toward (-) to decrease the volume by 1 level.Receiving a CallAccepting a Call Briefly press the Call Button.Rejecting a CallAccepting a Call Press and hold the Call Button for 2 seconds.Switching a device Call in Progress Slide the Jog Button toward the (+) position for 2 seconds.Switchinga callCall in Progress Press the Call Button for 1 second.Mute Call in Progress Briefly press the middle of the Jog Button. Redial Standby Mode/ Music in Play Press and hold the Call Button for 2 seconds.Voice Dial  Standby Mode/ Music in Play Briefly press the Call Button.Search Mode Standby Mode/ Music in PlayPress and hold the Call Button and Play/Pause Button for 2 seconds simultaneously.Battery Check Standby Mode Slide the Jog Button toward to (-) or (+) position for 2 seconds.Play Standby Mode Briefly press the Play/Pause Button.Pause Music in Play Briefly press the Play/Pause Button.Play previous song Music in Play Slide the Jog Button toward the (+) position for 1 second.Play next song Music in Play Slide the Jog Button toward the (-) position for 1 second.Change Mode Music in Play Press and hold the Jog Button for 2 second.
Connecting to the Play Station 4 12 13 16 1714 15EM-AK100 Registration and connectionbuttonLEDAudio cableUSB port1 Connect [EM-AK100]to PC/TV/Play Station.2 Press the [EM-AK100] button for 3 seconds.3[EM-AK100] switches to connection request mode.4 Slide the Power switch of [EM-W100] toward the ON position.5 Press the Play/ Pause button and the Call button of [EM-W100]simultaneously for 2 seconds.6[EM-W100] switches to search mode.7If connection is completed, [EM-W100] informs you the connectionstatus by voice.Automatic ReconnectionIf you turn on the power of [EM-W100] while the power of [EM-AK100]is on, it will beconnected automatically.If the automatic reconnection does not work, press Play/ Pause and Call buttons of [EM-W100] simultaneously for 2 seconds and connect manually by pressing the [EM-AK100]button for 3 seconds.Manual connection[EM-AK100] can be registered/connected with [EM-W100]LEDFeatures per connected devicePlease note that [EM-AK100] supports different functions in [EM-W100] depending onthe connected device. Please see the following description.[EM-AK100] Status DescriptionPower OnNo Connection History : The blue LED blinks quickly for 30 seconds and blinks three times at intervals of 5 seconds for 10 seconds repeatedly.Connection History Saved: The blue LED blinks twice every 5 seconds.Power Off The LED turns off.Connection Request ModeThe blue LED blinks quickly for 30 seconds and blinks three times at intervals of 5 seconds for 10 seconds repeatedly.Connected Status  The blue LED blinks once every 5 seconds.Connecting the TVWhen you connect [EM-AK100]to aTV that does not support USB Audio, you need toconnect the AUX cable to the Audio / Headphone output terminal of the TV and theAudio terminal of [EM-AK100]as shown in Figure 1 or Figure 2.Microphone function is not supported when you connect [EM-AK100]to TV.Function DescriptionSpeaker On Briefly press the Play/Pause button while the speaker is off.Speaker Off Briefly press the Play/Pause button while the speaker is on. Volume ControlSlide the Jog Button toward the (+) position, the volume increases by one step.Slide the Jog Button toward the (-) position, the volume decreases by one step.Acoustic vibeMode ChangePress and hold the middle of the Jog button for 2seconds.Change the Mode with “Beep” sound. Acoustic vibe On(Default) Acoustic vibe OffConnecting the PC Function ActionMic OnMic is turned off while connecting. Briefly press the Call Button while the Mic is turned off. Mic is turned on with “Beep” sound. Mic Off Briefly press the Call Button while the Mic is turned on.Speaker On Briefly press the Play/Pause Button while the speaker is off.Speaker Off Briefly press the Play/Pause Button while the speaker is on.Mic/Speaker OnBriefly press the Play/Pause Button while the Mic/Speaker is off. Mic/Speaker is turned on simultaneously.Speaker Volume changes while the Mic is turned on. Mic/Speaker Off Briefly press the Play/Pause Button while MIC/Speaker is on.MIC/Speaker is turned off simultaneously.Volume ControlSlide the Jog Button toward the (+) position, the volume inceases           by one step.Slide the Jog Button toward the (-) position, the volume deceases by one step.Mode Change Press and hold the Jog button for 2 seconds while the Mic is off. The mode is changed with “Beep” sound.Acoustic vibe On(Default) Acoustic vibe OffFunction ActionMic OnMic is turned off while connecting.Briefly press the Call Button while the Mic is turned off. Mic is turned on with the “Beep” sound.Each time the microphone is turned on, the speaker volume changes to a certain level. Mic Off Briefly press the Call Button while the Mic is on. Speaker On Briefly press the Play/Pause Button while the speaker is off. Speaker Off Briefly press the Play/Pause Button while the speaker is on. Mic/Speaker On Briefly press the Play/Pause button while the Mic/Speaker is off. Mic/Speaker is turned on simultaneously. Mic/Speaker Off Briefly press the Play/Pause Button while the Mic/Speaker is on.Mic/Speaker is turned off simultaneously. Volume ControlSlide the Jog Button toward the (+) position, the volume increases by 1 step.Slide the Jog Button toward the (-) position, the volume decreases by 1 step.Mode ChangePress and hold the Jog Button for 2 seconds while the mic is off. The mode is changed with “Beep” sound.Acoustic Vibe On(Default) Acoustic Vibe OffNo sound from [EM-W100] on the User selection screen.You can hear the sound from the Game Selection screen.Appropriate speaker and microphone level settings are required before the game runs.-Speaker Level: [Settings] → [Devices] → [Audio Devices]  → [Volume Control]-Mic Level: [Settings] → [Devices] → [Audio Devices] → [Adjust Mic level]Fig1) Connect TV  to USB port (EM-AK100 + Audio cable )Fig.2) Connect TV connection using USB extension cable(Connect Cable + EM-AK100 + Audio cable)USBAUX!CAUTIONInterference due to TV size and usage environment may affect the wireless performance of [EM-AK100]. Depending on the usage environment, it can be installed as the configuration shown in Fig. 2) to minimize interference of wireless signal to the TV.You can not use a TV that does not support audio/headphone output.Even if you use a TV that supports audio/headphone output, all the functions may not work depending on the TV.If you increase the volume of the TV too loudly, it may affect the sound quality. Please decrease the TV volume and increase the volume of [EM-W100]!CAUTIONIf you can not execute the connection request mode by key operation after Inserting the [EM-AK100]into a connected device such as a PC, remove it from the connected device and try to connect again.Bluetooth•Bluetooth is a technology for wireless communication between devices at distances ofless than 10 meters and uses the unlicensed 2.4 GHz frequency band.•The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.•Bluetooth is a registered trademark of Bluetooth SIG and is used by JINYOUNG G & Tunder license agreement.Bluetooth Communication Processing•The 2.4GHz band used by Bluetooth-compatible devices is the radio band shared byvarious types of devices.•Bluetooth-compatible devices use technology that minimizes the impact on othercomponents that use the same wireless band, but these effects can reducecommunication speed and distance, and in some cases intercept communications.•The signal transmission rate and the communicable distance are the distance betweencommunicating devices, the presence of obstacles. It depends on the radio status anddevice type.•EM-Tech does not guarantee that all wireless connections between this unit and thedevice are compatible with Bluetooth functionality.©2013 CSR pic and affiliates,aptX@ mark and aptX logo are trademarks of CSR plc or one of its affiliated companiesand may have been registered in more than one jurisdiction.Android™Android and Google Play are trademarks of Google, Inc.Bluetooth communicationDetachable Tape
18 19 22 2320 21Troubleshooting (EM-W100)Problem Cause SolutionThe power does not turn on The device is turned off. Check the battery level and charge it. Can not pair EM-W100 to the Bluetooth devices.The device is turned off. Turn on the device and perform the pairing.Another Bluetooth device is connected. Disconnect your current Bluetooth connection and pair with the new device.Devices are too far away. Pair your devices within 10 meter.A device that emits a 2.4 GHz frequency band signal nearby. (Ex: Microwave, Wireless LAN, etc.). Keep this unit away from the device that emits the radio signal.The device you want to pair with this unit such as a Bluetooth adapter, it is set to a different password than "0000".Use the Bluetooth adapter with a password of "0000".Bluetooth device does not support A2DP. Perform pairing with devices that support A2DP.Can not set up Bluetooth ConnectionAnother Bluetooth device is connected. Disconnect the current Bluetooth device and set up the  Bluetooth connection again with the device.The Bluetooth feature of the device is turned off. Turn on the Bluetooth function of your device.If this unit is listed on the device's Bluetooth not registered. Perform Pairing again.Can not make a call Not connected with phone.If your phone does not support headset or handsfree function, you can not use the call function.Check the battery level and charge.  Troubleshooting (EM-AK100) EM-W100 Specifications and FeaturesItem CommentsModel EM-W100Name Specific low power wireless device(Data transmission  wireless device)Bluetooth Specification V 4.1 (HSP/HFP/A2DP/AVRCP Profile)Battery DC 3.7 V / 420 mAh , Lithium-ion PolymerStandby Time Up to 750 hoursTalk Time Up to  17 hoursMusic Play Time Up to  14 hoursCharging Time Less than 2.5 hours Rated Input Voltage DC 4.75 V - 5.3 VOperating Temperature -10 ˚C~ 50 ˚CDimension / Weight 181 mm (W) X 181 mm (L) x 16 mm (H) / 88 gOperating Frequency 2402 MHz - 2480 MHzAntenna power supply 3 mWThe recipient of the conformity assessment EM-Tech  Co., Ltd.Manufacturer EM-Tech Co., Ltd.Country of Origin VietnamManufacturing year Marked on the box separately (S/N : 1st-3rd number –Yr/Mon)Certification Number R-CRM-eMT-EM-W100Out of Communication RangeIf connection between [EM-W100] and [EM-AK100]is out of effective communication range(33 feet/10 meters), the communication signal becomes weaker and the communication canbe lost.If the device comes back in the effective communication range within 10 minutes,[EM-W100] and [EM-AK100] are connected again automatically.If the devices does not connect automatically, you can connect manually by pressing the[EM-AK100] button for 3 seconds after pressing Play/Pause button and Call button of[EM-W100] for 2 seconds simultaneously.If [EM-AK100] and [EM-W100] come in the effective range within 10 minutes, they areautomatically reconnected.Red LED of [EM-W100] and blue LED of [EM-AK100] blinks twice every 5 seconds after 10minutes, and automatic reconnection is not supported.Problem Cause SolutionNo sounds or bufferingThe volume on the connected device is too low. Increase the volume on the connected device.The connection device does not send a Bluetooth audio signal to the device. Set the Bluetooth audio signal output on the connected device to the device.The Bluetooth connection between the devices has been disconnected. Perform Bluetooth pairing again.There is a devices that emits signals in the 2.4 GHzfrequency band nearby. (Ex: Microwave, Wireless LAN, etc.)Put it far away from any devices that emits radio signals.This device is too far from the connected device. Move the connected device within 10 meters from [EM-AK100].No sound when connecting to TVIt is not connected properly. Reconnect the USB Cable to [EM-AK100].  The audio output device of the TV is not set to [EM-AK100]. Change the TV’s output settings for devices you wish to connect.No sound when connecting to Play Station 4The connection is not set up. Please change the output settings on Play Station 4 to the USB headset option by accessing [Devices] - [Audio Devices] - [Output Devices].
Avoiding hearing damageIf volume on the headset is too high, permanent hearing loss may occur. Please set the volume to a safe level. You can become accustomed to a high volume that may sound normal but can damage your ears. If you experience ringing in your ears or muffled speech, stop listening and have your ears checked. The louder the volume, the more quickly the hearing can be damaged.Hearing experts suggest how to protect your hearing:· Limit the amount of time you use the headset at high volume. · Avoid the habit of increasing the volume so that you do not hear the loud noises around you. · Turn the volume down if you can not hear people speaking around you.For setting the maximum volume limit of the connection device, refer to the instruction manual supplied with the connection device.Class B equipment (home-use broadcasting communication equipment):This equipment is intended for home-use (Class B) electromagnetic compatibility equipment and can be used in all areas. 24 25 26 28•Do not drop the product from a high place.•Do not repair or disassemble the product.•Keep the product away from water, alcohol, benzene, etc.•Avoid contact with flammable materials.•Do not place or store the product near excessive heat or flammable material.•Please keep away from damp and dusty places.•Do not place any heavy objects on the products.•If you repair the device yourself, you will not be able to receive a service.•Do not arbitrarily replace the battery because it may explode.•If you use an incompatible recharger, the product may be damaged.•This product is not waterproof. Avoid humidity or water when using the product.•Make sure that an infant or a child does not swallow small components of theproduct.•If you have a medical device implanted, contact your doctor before using this device.This device is not a medical device.•Disconnect the charger from the wall outlet to prevent unnecessary powerconsumption.Safety CautionsIf the product is exposed to a large amount of sweat, wipe the product clean.!Reference1. Radio frequency exposureThis Bluetooth® Wireless Stereo Neckband Speaker EM-W100 is a radio transmitterand receiver. When in operation it communicates with a Bluetooth® equipped mobiledevice by receiving and transmitting radio frequency (RF) electromagnetic fields(microwaves) in the frequency range 2.4 to 2.4835 GHz. Your Bluetooth® Headset isdesigned to operate in compliance with the RF exposure guidelines and limits set bynational authorities and international health agencies when used any compatiblemobile phone.2. Battery information - A rechargeable battery has a long service life if treated properly.- A new battery or one that has not been used for a long period of time could havereduced capacity the first few times it is used. Do not expose the battery to extremetemperatures, never above +50°C(+122°F) or below -10°C(+14°F).- For maximum battery capacity, use the battery at room temperature.-If the battery is used in low temperatures, the battery capacity will be reduced. Thebattery can only be charged in temperatures between +10°C(+50°F) and +45°C(+113°F).- RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OFUSED BATTERIES ACCORDING TO THE INSTRUCTIONS.Important Safety InformationEM-AK100 Specification and FeaturesItem DescriptionModel EM-AK100Name of equipment Specific low power wireless device(Data transmission  wireless device)Bluetooth Specifications V 4.2 (HFP/A2DP/AVRCP Profile)Rated Input Voltage DC 4.75 V - 5.3 VOperating Temperature -10 ˚C ~ 50 ˚CDimension / Weight 18 mm (L) X 67 mm (H) X 10.4 mm (W) / 9.5 gOperating Frequency 2402 MHz - 2480 MHzAntenna Power Supply 3 mWThe Recipient of the Conformity Assessment EM-Tech Co., Ltd.Manufacturer EM-Tech Co., LtdCountry of Origin VietnamManufacturing Year Marked on the box separately (S/N : 1st-3rd number –Yr/Mon)Certification Number R-CMM-eMT-EM-AK10027FCC ID: 2AOIKEM-W100FCC ID: 2AOIKEM-AK100 Additional InformationDECLARATION OF CONFORMITYBluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.Qualcomm® aptXTM audio is a product of Qualcomm Technologies International, Ltd.FCC WARNING STATEMENT1. FCC Part 15.19This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.2. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.3. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Navigation menu