ETI Solid State Lighting 531701SER LED Downlight remote control User Manual

Elec-Tech International Co., Ltd. LED Downlight remote control Users Manual

User Manual

Download: ETI Solid State Lighting 531701SER LED Downlight remote control User Manual
Mirror Download [FCC.gov]ETI Solid State Lighting 531701SER LED Downlight remote control User Manual
Document ID2694909
Application ID/YD389sZ4mJGyUkinO1LGQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.16kB (264531 bits)
Date Submitted2015-07-28 00:00:00
Date Available2015-07-29 00:00:00
Creation Date2015-07-22 17:26:06
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2015-07-22 17:26:06
Document TitleUsers Manual
Document CreatorAcrobat PDFMaker 11 Word 版
Document Author: walkinnet

ℶ
❐
広
㢝
⃾
Product Instruction Manual
ӗ૱਽〠˖
Product Name:
LED ㆂ⚟
LED downlight
(XX=00-99)
රਧ㕆⸱˖531701XX
531701XX(XX=61~70)
(XX=00-99)
Model No.˖531701XX
531701XX(XX=61~70)
⭏ӗ୶˖ᒯьᗧ䊚⏖䗮⭥≄㛑ԭᴹ䲀‫ޜ‬ਨ
Manufacturer: Elec-tech International.,Co.Ltd
ൠ ൰˖ᒯьⴱ⨐⎧ᐲୀᇦ⒮䭷䠁ࠔ䐟 1 ਧ
Address: Guangdong Province Zhihai City, Tanjiawan, No.1 Jinfeng Rd
⭥ 䈍 Tel˖0756-3390990
Ր ⵏ Fax˖0756-3390778
㖁
൰ Web˖www.electech.com.cn
ⴞ
ᖅ
1. ӗ૱ㆰӻ Product Introduction----------------------------------------------------------------------3
2.
1.1.
ӗ૱᧿䘠˖Product Description ----------------------------------------------------------3
1.2.
ӗ૱⽪᜿മ---------------------------------------------------------------------------------------3
ӗ૱⢩ᙗ-------------------------------------------------------------------------------------------------3
2.1ˊ ӗ૱⢩⛩ Product characteristic ---------------------------------------------------------3
2.2ˊ ᢰᵟ৲ᮠ Specification--------------------------------------------------------------------4
3. ֯⭘ᯩ⌅ Method of application---------------------------------------------------------------5
3.1ˊ ᆹ㻵䈤᰾ Installation instruction--------------------------------------------------------5
3.2ˊ ᆹ㻵⽪᜿മ Installation schematic diagram-------------------------------------------6
3.3ˊ 㔤ᣔ䈤᰾ Maintenance Instruction-----------------------------------------------------7
4. ⧟ຳ㾱≲ Environmental requirement-------------------------------------------------------7
5. ӗ૱ᢗ㹼ḷ߶ Product carried standard----------------------------------------------------7
6. ा㝾䈤ᰞ Package instruction-----------------------------------------------------------------7
6.1ˊ व㻵␵অ Package list -------------------------------------------------------------------7
1. 䆖੺䈝 WARNING
WARNING - Risk of fire or electric shock. LED Retrofit Kit installation requires
knowledge of luminaires electrical systems. If not qualified, do not attempt
installation. Contact a qualified electrician.
WARNING - Risk of fire or electric shock. Install this kit only in luminaires that
have the construction features and dimensions shown in the photographs and/or
drawings and where the input rating of the retrofit kit does not exceed the input
rating of the luminaire.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
WARNING - To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
2. ӗ૱ㆰӻ Product Introduction
2.1. ӗ૱᧿䘠˖Product Description ˖
˄䝽ᇎ⢙മ with physical map˅
1ˊ ཆᖒቪረ:125*65mm.
Dimension: 125*65mm.
2ˊ ཆ༣Ѫ AL+PC
Housing AL+PC
3ˊ Zigbee 䈳‫ݹ‬䈳㢢
4ˊ 儈ᱮᤷ LED ⚟⨐.
2.2. ӗ૱⽪᜿മ˖
Product schematic diagram˖
3. ӗ૱⢩ᙗ Product features
3.1. ӗ૱⢩⛩ Product characteristic ˖
䮯ሯભ 5 зሿᰦԕк˗
Long lifetime (above 30,000hrs)
b. 儈᭸㢲㜭⧟‫˗؍‬
High efficiency, energy saving, environmental friendly
c. 㙀ߢࠫ,ᣇ䴷㜭࣋ᕪ,ᰐ㍛ཆ㓯઼㓒ཆ㓯䗀ሴ ˗
Impact resistant, shock resistant, no UV and IR radiation
a.
d. 㔯㢢⧟‫ˈ؍‬ᰐᴹᇣ≄փᧂ᭮ˈ֯⭘✝䟿վˈᆹ‫ޘ‬ਟ䶐DŽ
Green Initiative, no harmful gas is emitted, low heat is generated while used, safe and reliable .
e. ‫ݹ‬㢢㓟↓ˈ֯⭘䗷〻ѝᰐ仁䰚ˈᨀ‫׋‬ᴤྭⲴ㿶㿹ᝏਇˈ‫؍‬ᣔӪ⵬㿶࣋DŽ
Authentic and pure light color, no flicker, protecting your eyes while providing better visual enjoyment.
2.2 ᢰᵟ৲ᮠ Specification
亩ⴞঅս
⭥≄৲ᮠ Electronic ratings
ᮤ⚟࣏⦷:Rated Power/W
䗃‫঻⭥ޕ‬9Rated Input voltage/V
ᐕ֌仁⦷+]Frequency/Hz
⭥Ⓚ᭸⦷Rated Power efficiency
࣏⦷ഐᮠ˄3)˅Rated Power Factor
䈳‫ݹ‬ᯩᔿ'LPPLQJPHWKRG
‫ݹ‬Ⓚ৲ᮠ Photometric ratings
/(' ㊫රᮠ䟿/('7\SH4XDQWLW\
ᮤ⚟‫ݹ‬䙊䟿/P/XPHQ
㢢⑙.7HPSUDWXUH.
Ṏ㢢ᤡᎠ/Ra
CRI
⢙⨶৲ᮠ Physical information
ᶀ䍘
Material
ᐕ֌⑙ᓖ
operating temperature
ۘᆈ⑙ᓖ storage temperature
䱢ᣔㅹ㓗
IP rating
⚟ާ㿴Ṭ(L×W×H)/mm
Luminaire dimension(L×W×H)/mm
䇮䇑ሯભ /hrs
Lifetime/hrs
:
$&9
+]
!
!
SFV
OP#.
OP#.
..
$/ǃ3&
ćać
̚ćDŽ
,3
PP PP
K
3 ֯⭘ᯩ⌅ Method of application
3.1 ᆹ㻵ᢝ㉗᭟ᷦ⽪᜿മ
A ࠷ᯝ⭥ⓀˈỰḕᆹ㻵ㆂቪረDŽ
A:Turn off the power supply. Check the dimension of recessed can and the lamp holder type to see whether the retrofit
kit can fit the luminaire.
B:ሶ E26 ⚟ཤ᯻䘋ᒦ᯻㍗
B: crew clockwise the E26 adaptor into the lamp holder. Tighten.
C:䘎᧕ྭ䘎᧕ಘDŽ
C: Connect the male to the female connector.
E:ሶㆂ⚟ሩ߶ᆹ㻵ㆂˈੁкᯩੁ᧘䘋ᆹ㻵ㆂᒦ঑㍗DŽ
D: slide the luminaire up into the can firmly.
F:ሬ䙊⭥Ⓚ
E: Make sure the trim ring is flush with ceiling. Turn on the light to check the luminaire working status.
3.2 ᫽֌֯⭘ᯩ⌅
A.ሶ⚟ާ઼㖁‫਼ޣ‬ᰦ䙊⭥.
B.䘋㹼䝽ሩ˄䝽ሩᡀ࣏ˈ⚟ާ䰚⛱ࠐл˅
C.䝽ሩᡀ࣏ˈᢃᔰ APP ⭼䶒ਟ䘋㹼ᔰ‫ˈޣ‬䈳‫ˈݹ‬䈳㢢᫽֌
3.3 㔤ᣔ䈤᰾ Maintenance Instruction
*Ѫᔦ䮯֯⭘ሯભ䈧य֯⭘䞂㋮ㅹᥕਁᙗⓦࡲᬖᤝ⚟փ˗
*Do Not use volatile solvent such as alcohol to clean the troffer.
*␵⌱ᰦਟԕ֯⭘Ḅỹᐳ⋮㛕Ⲳ≤ᤗᒢਾᬖᤝ⚟փ˗
*Use soft cotton cloth with suds to clean the troffer .
*䶎уъӪ༛䈧य᣶‫˗ާ⚟؞‬
*Non-profecssional do Not attempt to take apart and repair the troffer .
*нਟ᣶ন䖟㔶ᡆ䖟㓯ˈྲ᷌ᦏൿ享䈧уъӪ༛ᡆࡦ䙐ল୶ᴤᦒDŽ
*No disassemble the soft cord, if broken, please invite professional personnel or ask the
4 ⧟ຳ㾱≲ Environmental requirement
֯⭘⧟ຳ⑙ᓖ Operating temperature˖-25̚40ć˗
ᆈ䍞⧟ຳ⑙ᓖ Storage temperature˖-40̚60ćDŽ
5 ӗ૱ᢗ㹼ḷ߶ Product carried standard
UL1598-2008
UL8750
6 ा㝾䈤ᰞ Package instruction
6.1 व㻵␵অ Package list ˖
⢙૱਽〠 Item
ᮠ䟿 Quantity
ㆂ⚟ Ceiling light
䈤᰾Җ Manual
manufacturer to change
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
The distance between user and products should be no less than 20cm
IC STATEMENT
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
Le prĂŠsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisĂŠe aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioĂŠlectrique subi, mĂŞme si le
brouillage est susceptible d'en compromettre le fonctionnement.
The distance between user and products should be no less than 20cm
La distance entre l'utilisateur et de produits ne devrait pas ĂŞtre infĂŠrieure Ă  20cm

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : walkinnet
Create Date                     : 2015:07:22 17:26:06+08:00
Modify Date                     : 2015:07:22 17:26:06+08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2015:07:22 17:25:24+08:00
Creator Tool                    : Acrobat PDFMaker 11 Word 版
Document ID                     : uuid:76fbc3cb-0795-4c0e-ad43-eb45f1bd4a82
Instance ID                     : uuid:78eb2888-b861-43bd-993b-0b1775efc391
Format                          : application/pdf
Title                           : 广东德豪润达电气股份有限公司
Description                     : 
Creator                         : walkinnet
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Keywords                        : 
Source Modified                 : D:20150721022206
Company                         : Microsoft
Comments                        : 
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XZH531701SER

Navigation menu