ETi Solid State Lighting 5456912016 LED Shop light User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2925615
Application ID	1IQq973OO1554sCx0XvLdA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	101.14kB (1264214 bits)
Date Submitted	2016-03-10 00:00:00
Date Available	2016-03-11 00:00:00
Creation Date	2016-01-28 15:22:46
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2016-03-01 12:44:25
Document Title	User Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

545691XX LED Shop light Installation Instructions
1. The product package includes the following components:
1.1 LED shop light (1 unit)
1.2 Installation Instructions
1.3 Hanging chain (2pcs)
2. IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS：
2.1 Use hook to support chain, not the electrical cord.
2.2 Do not install on radiant-heating type ceiling
2.3 The hooks are to engage the chain only and not the electric cord shall be included.
2.6 Servicing should not be carried out while the luminaire and/or the surroundings are damp unless the plug
is disconnected from the power supply
2.7 DO NOT SUBMERSE
2.8 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
3. DO NOT USE WITH DIMMERS.
Electrical Characteristics (Typical value):
Length 3ft (545691XX)
Voltage AC (V) 120
Current AC (mA) 600
Power (W) 50
PFC >0.9
Rated Frequency (Hz) 60
FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is
subjected to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
IC Compliance Statement: This device complies with Industry Canada’s licence‐exempt
RSSs.Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement
est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer
un mauvais fonctionnement de l'appareil.
Changes or modifications not expressly approved by the party responsible for compliance could
void your authority to operate the equipment.
4. Tools Required :
5. Installation Steps :
1. Select suitable location that can support the weight of the fixture .Determine method of
mounting before drilling .Mark two spots on the ceiling 30 in. apart for the mounting hardware
(not included) .
760mm
2.
Mounting to drywall
■ Drill a ¼ in. hole in the ceiling to clear the closed flaps of the toggle bolt (not included). Make
sure to fasten the toggle bolt into the butterfly nut before inserting the flaps into the ceiling.
Tighten the toggle bolt.
Mounting to wood
■ Drill a 1/16 in. diameter pilot hole in the ceiling. Make sure to fasten the combo
wood‐machine end into the metal hook. Tighten the hook screw (not included) into the wood.
3. Attaching the light to the chain
Install one closed loop of hanging chain (B) to the metal “T” shaped hook (A) on the fixture body.
Repeat this step on the other side of the fixture.
4. Attaching the chain to the ceiling
■ Hang the fixture body by placing one chain set (AA) over each hook (not included) that has
been installed on the ceiling. Adjust chains to level light. The fixture must hang at least 3 in. from
the ceiling.
5. Connecting the power cord
■ After installation, plug the power cord (B) into the end of light and then into the power
supply.
■ Pull chain down to turn on.
Control with Bluetooth
1. Open the Bluetooth on your smart phone.
2. The phone will search for “CE 3ft BN shoplight”, press “CE 3ft BN shoplight” to connect the
phone to the light. After connected successfully, the light will sound “The light is connected”.
3. Then open you music APP, choose the songs and start to plat.
4. To disconnect the shoplight, hit the “CE 3ft BN shoplight” again, after disconnected successfully,
it will sound “The phone is disconnected”.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2016:01:28 15:22:46+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:03:01 12:44:25+08:00
Metadata Date                   : 2016:03:01 12:44:25+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 3' CE shoplight 54569141 说明书认证用 20160126.docx
Creator                         : Administrator
Document ID                     : uuid:f89f72ba-a093-426a-ad5f-14630be77a2c
Instance ID                     : uuid:eb1fe589-176e-4085-b094-28d38db3fd22
Page Count                      : 4
Author                          : Administrator

EXIF Metadata provided by EXIF.tools