ETi Solid State Lighting 5456922017 LED Shop light User Manual XZH 5456922017

Download:
Mirror Download [FCC.gov]
Document ID	3734967
Application ID	p+fsutMizfyburB+wVkR3Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.74kB (96709 bits)
Date Submitted	2018-01-31 00:00:00
Date Available	2018-01-31 00:00:00
Creation Date	2018-01-23 11:24:27
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-01-23 11:24:27
Document Title	Microsoft Word - XZH-5456922017_User manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

JX257‐08 manual
一、 functional overview
1、 Bluetooth stereo speaker.
2、 Play music
3、 DC power supply
4、 Bluetooth V4.1
5、 Bluetooth pairing name：40in.BN Shoplight
二、 KEY
No keystrokes operation
三、 Function operation
1. Switch machine: turn on the power and turn off the power.
2. Pairing:
1) no matching with the mobile phone, the machine will enter the match automatically,
and it will be paired with the mobile phone.
2) disconnect the connection and enter the pairing automatically (when the distance
is unconnected, but not enter the match, the timeout will enter the match);
3) there is no timeout setting for the pairing state, and it is always in the pairing
mode;
3. Return function:
1) when the mobile phone is paired with bluetooth, the bluetooth is switched on
automatically and the last one is used;
2) after the mobile phone or bluetooth has left the effective distance, the bluetooth
will enter the unconnected state, return the effective distance within 5 minutes,
and have the automatic return function;
4. Volume:
1) no button control volume, the maximum volume will be set by default at every turn;
5. Prompt:
1) start up, connect successfully and disconnect.(the customer requires the same
sound content)
四、 Timeout setting
incident
time-out period
Posttimeout action
Paired timeout
N/A
--
Timeout with cell phone over
5 Mins
In pairing
distance.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal
operation
Industry Canada Notice
This device complies with Industry Canada licence‐exempt RSS standard(s).
1. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device."
2.Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Avis d’Industrie Canada Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique ne
dépasse pas les Rèlements sur l’interférence radio par un appareil numérique de classe B
stipulées dans les Règlement sur l’interférence redio d’industrie Canada

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:01:23 11:24:27+08:00
Modify Date                     : 2018:01:23 11:24:27+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Microsoft Word - XZH-5456922017_User manual.doc
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:e08492ba-62f7-4539-9f42-a5c5bd948f71
Instance ID                     : uuid:ca7a2697-60be-406a-b8ca-ae75754cd152
Page Count                      : 2

EXIF Metadata provided by EXIF.tools