EUTRONSEC S p A AAG SmartPico USB Electronic Key User Manual SmartPico Overview v1 0

EUTRONSEC S.p.A. SmartPico USB Electronic Key SmartPico Overview v1 0

Users Manual

Download: EUTRONSEC S p A AAG SmartPico USB Electronic Key User Manual SmartPico Overview v1 0
Mirror Download [FCC.gov]EUTRONSEC S p A AAG SmartPico USB Electronic Key User Manual SmartPico Overview v1 0
Document ID789210
Application IDOz2u23uhA7mUwD9O/FiVAw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.34kB (304229 bits)
Date Submitted2007-05-07 00:00:00
Date Available2007-05-07 00:00:00
Creation Date2007-04-20 09:06:53
Producing SoftwareAFPL Ghostscript 8.53
Document Lastmod2007-04-20 09:06:53
Document TitleSmartPico Overview v1.0
Document CreatorPDFCreator Version 0.9.0
Document Author: Eutronsec

Overview version 1.0
© Copyright 2007 by Eutronsec S.p.A.- Italy - 24048 Treviolo BG Via Gandhi, 12
© 2007 Eutronsec S.p.A. All rights reserved
The names of the other products mentioned are trademarks of their respective owners.
This hardware key is in compliance with the following test specification:
CEI EN 61000-4-2; CEI EN 61000-4-3; CISPR22
as required by:
CEI EN 61000-6-1, CEI EN 61000-6-2, CEI EN 61000-6-3, CEI EN 61000-6-4
which are specified for the following test:
• “ESD Immunity test”
• “Radiated radio-frequency and electromagnetic field immunity test”
• “Radiated Emission Verification”
In compliance with the “Essential Requisites” for the EMC Directive 89/336/EEC.
FCC ID: TFC-AAG
Eutronsec S.p.A.
SmartPico
Supply: 5V DC
Absorption: 250 mA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
IMPORTANT REMARKS
Due to the limited space on the product shell, all FCC certification references are on this technical manual.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
1. Introduction
SmartPico is a driverless device that combines the
SmartKey’s software protection characteristics with
the handiness and data transport features. The core
of the device is represented by SmartKey, the
dongle for software protection against piracy, and
mass storage memory where to upload the software
itself.
SmartPico’s software protection section is fully plug
& play; it does not require any installation on the
computer as it exploits drivers that are already available in Windows installation. This part is
always characterized by one unique code that identifies the software house.
By means of the included application it is possible to partition the flash memory into various
units according to one’s needs. It is possible to create one partition with a CD functionality in
order to manage Windows autorun and store the ISO image, one mass storage partition at
the end-user’s disposal, one write-protected partition, for a “secure” use and one fully
encrypted partition. Besides it is possible to reserve a memory area which is hidden to the
operating system but that can be accessed by addressing it with proper commands.
The application can be then directly installed on SmartPico, protected by any unauthorized
copy and run, also automatically, directly from the device thus making the solution completely
portable.
The User will only have to insert it in the USB port of any computer and the application will be
immediately available.
2 DEVICES IN 1
- software protection like with Smartkey without having to install any driver (using the SDK
of the SmartKey)
- partitionable flash memory with the possibility of creating up to 4** partitions with the
following functionalities:
•
•
•
•
Standard Mass Storage, where data can be stored and visualized
CD-ROM, with Autorun function
Encrypted Mass Storage, with AES 256 bit
Write-protected Mass Storage, that is a read-only partition
(**) Hidden area to the OS
2. Features
High security: the use of microprocessors makes hardware cloning of the dongle impossible.
Driverless: the dongle drivers are already present in Windows installation.
Algorithmic query: algorithmic query processes, and not only fixed response based, are
present
Identification Code: each dongle is customized with an ID code which is preset during the
manufacture and different for every User.
Data Protection: it allows to encrypt data files associated with the proctected applications.
Internal Memory: up to 896 bytes of non volatile secure password protected memory for
reading and writing operations.
Programmable security codes: the user can program a double 16+16 access code through
the utilities supplied.
Remote control: additional libraries allow to identify, read and write the dongle installed on an
Internet client.
Languages: complete support of programming languages and environments (Visual C++,
Visual Basic, Autocad, Solaris, Delphi, .NET, ecc).
Flash memory capacity: 256MB - 512MB - 1GB - 2GB.
SDK: constantly updated on the website.
3. Technical specifications
USB Spec. 1.1 - USB 2.0 High Speed
Green LED (power on/connected)
Data reading speed of the flash memory: 18 MB/s
Data writing speed on the flash memory: 11 MB/s
Certifications: FCC/CE

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Page Count                      : 5
Producer                        : AFPL Ghostscript 8.53
Create Date                     : 2007:04:20 09:06:53+02:00
Modify Date                     : 2007:04:20 09:06:53+02:00
Title                           : SmartPico Overview v1.0
Creator                         : PDFCreator Version 0.9.0
Author                          : Eutronsec
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TFC-AAG

Navigation menu