Earthquake Sound Subwoofers Db R Users Manual SubManual

DB-R to the manual 377cbc55-00c4-40d4-81d3-7c5e0c63056a

2015-02-06

: Earthquake-Sound Earthquake-Sound-Earthquake-Subwoofers-Db-R-Users-Manual-537068 earthquake-sound-earthquake-subwoofers-db-r-users-manual-537068 earthquake-sound pdf

Open the PDF directly: View PDF PDF.
Page Count: 9

DownloadEarthquake-Sound Earthquake-Sound-Earthquake-Subwoofers-Db-R-Users-Manual- SubManual  Earthquake-sound-earthquake-subwoofers-db-r-users-manual
Open PDF In BrowserView PDF
Magma

The Sound That Will MOVE You...

DB-R

Subwoofers
Installation
&
Reference
Manual

DBX-R

Tremor-XR

Wwww.earthquakesound.com
Earthquake Sound Corporation, 1215 O’Brien Drive, Menlo Park, CA, 94025. Ph (650) 327-3003. Fax (650) 327-0179.

A THANK YOU NOTE
Dear Valued Customer,

Congratulations! You are the proud owner of a high-quality Earthquake Subwoofer.

Earthquake Sound Corporation, located in Menlo Park California at the heart of the San Francisco Bay Area; specializes in
manufacturing high end car audio products ranging from the smallest titanium tweeter to the world’s largest amplifier. In its
dedication to excellence, Earthquake has maintained extensive programs in research and development to provide you
with the highest quality mobile audio products.

This owners manual is designed to better acquaint you with Earthquake products and to guide you through all phases of
system design and application. It is imperative that you read this manual in its entirety. Earthquake technicians and staff
are looking forward to answering any questions you might have.

CAUTION: Earthquake Audio products are capable of producing over 140dB and are commonly used
for high powered audio systems. Prolonged exposure to SPL levels of over 100dB will cause permanent
haring damage. We at Earthquake ask you to please exercise extreme caution when using our product
for competition or every day use.

SUBWOOFER SPECIFICATIONS

OHM-LAW

How To Wire Your Subwoofers.

MAGMA-Pro

www.earthquakesound.com

#1 in Sound Quality, #1 in SPL...
“In sound quality and low frequency extension, the Earthquake MAGMAs excel leaving all other woofers behind” May 1999
CA&E. “With nearly 22mm of linear excursion (four times longer than other sub), and a hefty 3” 4-layer dual voice coil; the
MAGMAs make sealed box bass an octave lower than any other woofer.”
May 1999 CA&E.

MAGMA12

MAGMA15

15 5/16"
14"
6 7/8"

5 7/8”

12 1/2”
11 1/8”

6 3/8”

8"

16.5"
#1
Bass Heads

MAGMA15

6"

3"

SPL
SLAPS
TUNED

LOW BASS
SLAPS
TUNED
V = 1.4 ft3
FB = optimum
using SLAPS-12
passive radiator

V = 1.1 ft3
FB = optimum
using SLAPS-12
passive radiator

SPL

NORMAL

SEALED

SEALED

V = 0.8 ft3
Q = 0.81
F3 = 42Hz
Fc = 48Hz

V = 1.0 ft3
Q = 0.76
F3 = 42Hz
Fc = 44Hz

16.5"

PORT

MAGMA12

23"

16"

18"

#1
Bass Heads

PORT

14"

19"

22"

LOW BASS
SEALED
V = 1.2 ft3
Q = 0.7
F3 = 41Hz
Fc = 42Hz

SPL
SLAPS
TUNED
V = 1.5 ft3
FB = optimum
using SLAPS-15
passive radiator

SPL
SEALED
V = 1.5 ft3
Q = 1.2
F3 = 47Hz
Fc = 63Hz

LOW BASS
SLAPS
TUNED
V = 2.5 ft3
FB = optimum
using SLAPS-15
passive radiator

NORMAL
SEALED
V = 2.0 ft3
Q = 1.0
F3 = 44Hz
Fc = 57Hz

LOW BASS
SEALED
V = 2.5 ft3
Q = 0.9
F3 = 42Hz
Fc = 53Hz

Specifications are subject to change without notice. Dimensions shown are external Dimensions using 3/4" MDF.

DB-Street Pro

www.earthquakesound.com
DBR-12

DBR-15

6 3/4”

5 ½”

5¾“

4 1/4”

4¾“

15 1/4”
14”

12 3/8”
11”

10 1/4”
9 3/8”

6 1/4”

5 ½”

5 ½”

6 1/4”

DBR-10

VB = 0.7 ft3
FB = 45Hz
PD = 3” #1 “SPL”
PL = 8.5” Ported Box

VB = 1.0 ft3
FB = 45Hz
#1 “SPL”
PD = 3”
PL = 7”
Ported Box

VB = 2.5 ft3
FB = 45Hz
PD = 4” #1 “SPL”
Ported Box
PL = 5”

VB = 1.25 ft3
FB = 35Hz
PD = 3” #1 Low Bass
PL = 10” Ported Box

VB = 1.75 ft3
FB = 40Hz
PD = 4” #1 Low Bass
PL = 10” Ported Box

VB = 4.0 ft3
FB = 35Hz
PD = 4” #1 Low Bass
Ported Box
PL = 4”

VB = .75
Q = .85 #2 Low Bass
F3 = 47Hz sealed Box
Fc = 56Hz

VB = 0.9 ft3
Q = 1.3
#2 “SPL”
F3 = 53Hz Sealed Box
Fc = 74Hz

VB = 1.5 ft3
Q = 1.2 #2 “SPL”
F3 = 55HzSealed Box
Fc = 76Hz

4TH ORDER
Band Pass
VB = 1.0 ft3
FB = 55Hz
PD = 4”
PL = 4”

VB = .8 ft3
Q = .87
F3 = 55Hz
Fc = 38Hz

VB = 1.7 ft3
Q = .9 #2 Low Bass
F3 = 45HzSealed Box
Fc = 57Hz

7TH ORDER
Band Pass
VB = .75 ft3
FB = 70Hz
PD = 4”
PL = 8”

VB = 2.8 ft3
FB = 30Hz
PD = 4”
PL = 12”

VB = 3.0 ft3
Q = .9 #2 Low Bass
F3 = 45HzSealed Box
Fc = 54Hz

4TH ORDER
Band Pass

4TH ORDER
Band Pass
VB = 1.4 ft3
FB = 60Hz
PD = 5”
PL = 7”

VB = 1.8 ft3
Q = .95
F3 = 56Hz
Fc = 35Hz

VB = 3.0 ft3
FB = 55Hz
Two ports at
4” x 4” each

VB = 3.0 ft3
Q = .9
FO = 55Hz
Fc = 34Hz

Specifications are subject to change without notice. Dimensions shown are external Dimensions using 3/4" MDF.

DB-Xtreme

www.earthquakesound.com
DBXR-10D & DBXR-10

DBXR-8D
8”
7 1/4”

6”

51/4”

4”

4 3/4”

10 5/8”
9 3/8”

5 1/2”

6 3/8”

(External Dimensions using 3/4" MDF)
Bass head design for competition
14"

15 1/2"

12"

11"

13"

DBX8D

#2

#1

Bass head design for competition
15"

Port tuned design for deep bass
14"

11"
PORT (2"x10.5"x11")
Internal dimensions

15 1/2"

PORT (1"x9.5"x13")
Internal dimensions

#1

(External Dimensions using 3/4" MDF)

DBX10D

#2

Port tuned design for deep bass
16"

11 "

15 "

Port

DBX8D

#3

3" diameter
7" long

12"

11"

Port

Sealed design for tight bass
10"

#3

11 1/4 "

4" diameter
8 1/2" long

Sealed design for tight bass
12"

11 1/4 "

DBX8D

12"

10"

DBX10D

DBX10D

Specifications are subject to change without notice. Dimensions shown are external Dimensions using 3/4" MDF.

DB-Xtreme

www.earthquakesound.com

DBXR-12D & DBXR-12

DBXR-15D
15 5/8”
14”

7”

8”

5 6/8”

6 5/8”

12 5/8”
11 1/8”

6 3/8”

23"

DBX12D

#1Passive tuned design for

18"

16"

PORT (3"x12.5"x16")
Internal dimensions

14"

19"

competition
#1Bass head design for
22"

DBX15D

#1 Passive tuned design for

Drone Tuned Box
VB = 2 1/2 ft3
FB = optimized with
SLAPS-12 passive

#2 Port tuned design for deep bass

16 1/2"

PORT (6"x16.5"x16.5")
Internal dimensions

for competition
#1Bass head design
16 1/2"

7 3/8”

Drone Tuned Box
VB = 2 1/2 ft3
FB = optimized with
SLAPS-15 passive

#2 Port tuned design for deep bass
23"

19"

12 1/2"#2

#3 Sealed design for tight bass

DBX15D
DBX15D

#3 Sealed design for tight bass
17"

14"

15 "

DBX12D

17"

10 3/4 "

14"

9"
9"
PORT (2"x16.5"x9")
PORT
(2"x16.5"x9")
Internal dimensions
Internal
dimensions

DBX12D
DBX12D

18"

9"
PORT (2"x12.5"x9")
Internal dimensions

14"

13 1/2"

DBX15D

DBX15D

Specifications are subject to change without notice. Dimensions shown are external Dimensions using 3/4" MDF.

TREMOR-Xtreme

www.earthquakesound.com

TremorX-8

TremorX-10

8 1/2”
7 1/4”

5”

5 5/8”

5”

4 5/8”

10 3/8”
9”

5 3/4”

5 3/4”

#1 Bass head design for15"competition

#1 Bass head design for14"competition

15 1/2"

11"
PORT (2"x10.5"x11")
Internal dimensions

TremorX8

12"

13"
PORT (1"x9.5"x13")
Internal dimensions

11"

15 1/2"

TremorX10

#2 Port tuned design for16"deep bass

#2 Port tuned design for14"deep bass

11 "

15 "

#2

TremorX8

3" diameter
7" long

bass
#3 Sealed design for tight
10"

Port
12"

11"

Port

TremorX10

bass
#3 Sealed design for tight
12"

11 1/4 "

11 1/4 "

TremorX8

12"

10"

4" diameter
8 1/2" long

TremorX10

Specifications are subject to change without notice. Dimensions shown are external Dimensions using 3/4" MDF.

TREMOR-Xtreme

www.earthquakesound.com
TremorX-15

15 ½”
13 3/4”

7”

5 1/2”

6 1/8”

12 3/8”
11”

6 3/8”

TremorX-12

6 1/2”

6 3/8”

for competition
#1 Bass head design22"

#1 Bass head design for competition

tuned design for
#1Passive
deep bass small volume

19"

#2 Port tuned design for deep bass
12 1/2"

9"

Internal dimensions

18"

Internal dimensions

PORT (2"x12.5"x9")

14"

Drone Tuned Box
VB = 2 1/2 ft3
FB = optimized with
SLAPS-15 passive

9"

#3 Sealed design for tight bass

TremorX15

#3 Sealed design for tight bass

14"

17"
15 "

TremorX12

17"

10 3/4 "

14"

Internal dimensions

tuned design for
#1 Passive
deep bass small volume

23"

13 1/2"

TremorX12

PORT (6"x16.5"x16.5")

TremorX15

Drone Tuned Box
VB = 2 1/2 ft3
FB = optimized with
SLAPS-12 passive

#2 Port tuned design for deep bass

16 1/2"

PORT (2"x16.5"x9")

TremorX12

23"

18"

Internal dimensions

14"

PORT (3"x12.5"x16")

16 1/2"
16"

19"

TremorX15

Specifications are subject to change without notice. Dimensions shown are external Dimensions using 3/4" MDF.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Page Count                      : 9
Create Date                     : 2004:09:17 09:52:07
Modify Date                     : 2004:09:17 09:52:07
Producer                        : Corel PDF Engine Version 11.633
Author                          : joseph sahyoun
Creator                         : CorelDRAW Version 11.0
Title                           : SubManual.cdr
EXIF Metadata provided by EXIF.tools

Navigation menu