Eastern Times Technology DS-2038 Wireless Mouse User Manual manul

Eastern Times Technology Co., Ltd Wireless Mouse manul

Contents

Users manual

This product is adopting the very advanced RF and Optical
technology. It lets you enjoy the freedom of wireless and enjoyment of
developed with the IC from Agilent
voltage, and low power deplete with
orientation. It has the highest resolution at 800DPI tha
t allow
. No readjustment is
atteries and the current is below
The IC has an environment adjustment function in the circuit
integration; It can automatically adjust different kind of desktop
usage will be double while desktop is
Can be compatible with IBM PC and all kinds of branded
Can be used under DOS, Win95/98/2000/Me/XP and Windows
Channel 256 ID Code, setting instruction:
please refer to the
No.3 of Assembly Instructions.
Power Saving:
The circuit is embedded with an automatic sleeping power-saving
function. If the mouse is not moved or touched for 4 minutes, the
brightness from LED will be lowered and after another 30 seconds, all
other current except for waking-up feature will be off automatically.
After 8 minutes more, it will enter into full-sleeping state and the
power-usage is almost near zero.
Voltage-Protection:
When the current voltage is decreased to a minimum level, the
mouse will be powered off automatically and the new batteries must be
replaced.
Wake-up Feeler: two ways.
1. touch mode: Grasp the mouse
2. press mode: Click any key
Features of receiver:
Frequency: 27MHz
Interface: PS/2, USB & Combo available
Current: +5V DC
Assembly Instructions:
1. C
onnect the receiver:
Connect the receiver with interface of computer: please note that
PS/2 Interface must
USB connector can be used whenever it is plugged.
2. Battery Installation
Open the battery cover on the bottom of the mouse, insert two
brand new batteries, (please note that
the right side or it will cause s
WARNING:
Different kinds of batteries (
batteries) mixed using may cause explosive damage.
3. Adjusting code
Before using it, please be sure that the adjusting code are not
interfered, for exampl
distances, the ID codes can be set through the buttons on the bottom of
the mouse, Thus, it start working within 4 seconds either of them can
be pressed first (As per Picture).
4. Usage
The receiver (box) can be pla
Mouse can be used on any desktop surface. (We recommend to use it
on any white or lighter color surface of desktop, thus, the power can be
saved.)

Navigation menu