Eastern Times Technology DS-2060 Wireless Optical Mouse User Manual 475007
Eastern Times Technology Co., Ltd Wireless Optical Mouse 475007
Users Manual
M
e/2000/XP
ry
P
CS new AA alkaline batteries
h
e mouse upper cover and pull the
(
Please see the reference picture)
es correctly according to the polarity
o
oves.
e
rs forward, when you hear ”crack”
w
s the battery cover is locked
o
r, please use the USB to PS/2 adaptor
n
ector before your computer star
t
-up.
n
ect the receiver directly with the USB
e
re is a little far between the case and
,
suggest you use an extended USB
c
ase and the receiver, so you can place
o
rking surface conveniently.
ID Setup
1. Please move the mouse near to the receiver
2. Press the ID button of the receiver by your hand, the receiver
light begin to flash
3. Press the ID button of the mouse bottom with some hard and
acuate object within 10 seconds, the receiver light will flash very
fast, a few seconds later it will be on which shows it is
successfully to finish the digital transmission between the mouse
and the receiver. You may start to use it.
4. Working distance: within 1-2 meters.
ÔÙ°´·¢ÉäÆ÷
µÄ° ´Å¥
ÏÈ°´½ÓÊÕÆ÷
µÄID°´Å¥
Attention Please
1. Please don’t make the mouse far away from the receiver in order
to work more smoothly.
2. You’d better use the mouse on the white desk, in this way the
batteries can be used longer time. Please remove the batteries if
the mouse will not be used for a long time.
3. This mouse with save power sleeping functions, please press any
key or scroll the wheel to wa
k
4. If you want to take off the
m
the ID switch of the mouse
b
take on the power,please cli
c
5. The optical mouse will not
w
any reflecting surface, 3D
m
6.
N
o need to check the digital
change the batteries, if mo
r
above way to re-operate.
Caution
Any changes or modificatio
n
p
arty responsible for complia
n
operate the equipment.
Note
N
ote: This equipment has be
e
the limits for a Class B digita
l
FCC Rules. These limits are
d
p
rotection against harmful int
e
This equipment generates, us
e
energy and, if not installed an
instructions, may cause harm
f
communications. However, t
h
will not occur in a particular i
n
First press the button of the receiver
Then press the button of the mouse