Eastern Times Technology DS-2283-2282 2.4G Wireless Optical Mouse User Manual TUVDS 2283
Eastern Times Technology Co., Ltd. 2.4G Wireless Optical Mouse TUVDS 2283
User Manual
DS-2283 2.4G Wireless Optical Mouse
Product feature
2.4G wireless connection, operating range 10 meters
Avago A3000 sensor for high performance
3 Adjustable CPI 1000/1500/2000 by hardware with CPI indicator
IR light tracing technology, work with many of surface
Energy saving design with low power indicator and power switch on mouse body, battery
lifetime up to 18 months
Plug & play Nano receiving adapter
Before use:
1. Find the wireless mouse and Nano receiver in package
2. Install 2PCS AAA battery into Mouse body Properly
3. Plug Nano receiver to USB port on PC
4. Put on power switch at the bottom of Mouse, LED indicator will keep flash for
few second, Now the Mouse is ready to work.
Product specification
1. CPI adjustable function
With 3 adjustable CPI 1000/1500/2000, factory setting is 1000CPI. Press the
switch button on top of Mouse can easy to adjust CPI. LED indicator will flash
one time while it converting to 1000CPI, LED will flash twice while it converting
to 1500CPI, LED will flash three times while it converting to 2000CPI.
2. Low power indication
LED will flash in red when battery is getting out of power, remind that it need
to change the new battery
Remark: Only AAA battery is available
3. Saving power mode and power switch off
If mouse is stay out of work for 8 minutes, it will turn to power saving mode,
press any button to restart it.
If you turn off PC or take out Nano receiver from USB port, press any button or
move the mouse to enter the power saving mode,
4, Nano receiver
A very small size design for Nano receiver, it can be plug and stay on USB port
of PC/Notebook without interference.
Portable design for travel, Nano receiver can be plug in the slot on bottom of
mouse
5, Customized function for the fourth and fifth button
There is two side key of mouse, it is default for move back/ move toward function.
End user can set up the function by software , it has more than 20 function for option.
The software can be download from website (check the local distributor) .
6, 2 multi-media button
Press it to link to default IE or Email service
Reconnection
Both of mouse and Nano receiver has a built-in code, It can be setting one mouse
to one receiver, or few of mouse to one receiver. Mouse and receiver need to
reconnect under the condition of High temperature, high magnetic, strong vibrate.
1. Plug off the receiver from USB port, and plug it on
2. Press the code switch
3. You can use it by reconnection
Remark
Design by approval IR motion detect technology
Data transfer by 2.4G wireless connection in 10 meters operating range, working
range will less than 10 meters if there is physics bothered.
Caution
Any amendment unauthorized is not allowing.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.