Eastern Times Technology DS-2509 Wireless Optical Mouse User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2443751
Application ID	zPTJBBLk/w8Wx050AFIy8g==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.58kB (44698 bits)
Date Submitted	2014-11-13 00:00:00
Date Available	2014-11-13 00:00:00
Creation Date	2014-11-13 19:02:08
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-11-13 19:02:08
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	C2DEC2C9

DS-2509 ( MA89P1+PAN3205)
2.4G Wireless Optical Mouse user manual
Product feature
2.4G wireless connection, operating range 10 meters
PAN3205 sensor, low power and high performance
3 switchable CPI 800/1200/1600
IR light tracing technology, work with many of surface
Energy saving design with low power indicator and power switch on mouse body
Plug & play Nano receiving adapter
Before use:
1. Find the wireless mouse and Nano receiver in package
2. Plug Nano receiver to USB port on PC
3. Switch the button at the bottom of mouse body, battery cover can be open (check
the pictures), Install 1PCS AA battery into Mouse body Properly
Put on power switch at the bottom of Mouse, LED indicator will keep flash for few
second, the Mouse is ready to work.
Product specification
1. CPI adjustable function
With 3 adjustable CPI 800/1200/1600, factory setting is 1200CPI. Press the switch
button at bottom of Mouse can easy to adjust CPI(check picture for the button).
LED indicator( will flash one time while it converting to 800CPI, LED will flash
twice while it converting to 1200CPI, LED will flash three times while it
converting to 1600CPI.
2. Saving power mode and power switch off
If mouse is stay out of work for 8 minutes, it will turn to power saving mode,
press any button to restart it.
If you turn off PC or take out Nano receiver from USB port, press any button or
move the mouse to enter the power saving mode.
3, Nano receiver
A very small size design for Nano receiver, it can be plug and stay on USB port
of PC/Notebook without interference.
Portable design for travel, Nano receiver can be plug into the slot next to the
battery position.
4. Customized function for the fourth and fifth button
There is two side key of mouse, it is default for toward/ backward function. End
user can set up the function by software, it has more than 20 function for option.
The software can be download from website (check the local distributor) .
Reconnection
Both of mouse and Nano receiver has a built-in code, It can be setting one mouse
to one receiver, or few of mouse to one receiver. Mouse and receiver need to
reconnect under the condition of High temperature, high magnetic, strong vibrate.
1. Plug off the Nano receiver from USB port, and plug it on
2. Move RF mouse within 50CM to Nano receiver, re-install the battery, Press any
key to reconnect, the above operation must be completed in 15 seconds.
3. Mouse will ready to work after reconnection.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:11:13 19:02:08+08:00
Create Date                     : 2014:11:13 19:02:08+08:00
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D2032353039CEDECFDFB9E2D1A7CAF3CBB5C3F7CAE9BBAACEF94D41383950312B333230352E646F63>
Creator                         : 
Document ID                     : uuid:095269bd-b1d0-4873-9575-7a4cba39fd3e
Instance ID                     : uuid:f961b3e5-0a74-4203-9825-93b686746b67
Page Count                      : 2
Author                          : 

EXIF Metadata provided by EXIF.tools