Eastern Times Technology DS-2523 2.4 GHz Wireless Mouse User Manual Manual

Eastern Times Technology Co., Ltd. 2.4 GHz Wireless Mouse Manual

Manual

DS-2523 (MA79P1+PAN3205) 2.4G Optical wireless MouseUser ManualProduct Feature2.4G wireless connection, operating range 10 metersPAN3205 sensor, low power and stable performance3 switchable CPI 800/1200/1600IR light tracing technology, work with many of surfaceEnergy saving design with low power indicator and power switch on mouse bodyPlug & play Nano receiving adapterBefore use:1. Find the wireless mouse and Nano receiver in package2. Plug Nano receiver to USB port on PC3. Switch the button at the bottom of mouse body, battery cover can be open (check thepictures), Install 1PCS AA battery into Mouse body Properly4. Put on power switch at the bottom of Mouse, LED indicator will keep flash for fewsecond, the Mouse is ready to work.Product specification1. CPI adjustable functionWith 3 adjustable CPI 800/1200/1600, factory setting is 1200CPI, Press and hold theleft and right button and hold it for 3 seconds can be convert the 3 level CPI.Remark: Only AA battery is available2. Saving power mode and power switch offIf mouse is stay out of work for 8 minutes, it will turn to power saving mode, press anybutton to restart it.If you turn off PC or take out Nano receiver from USB port, press any button or move themouse to enter the power saving mode.3, Nano receiverA very small size design for Nano receiver, it can be plug and stay on USB port ofPC/Notebook without interference.Portable design for travel, Nano receiver can be plug into the slot next to the batteryposition.ReconnectionBoth of mouse and Nano receiver has a built-in code, It can be setting one mouse toone receiver, or few of mouse to one receiver. Mouse and receiver need to reconnectunder the condition of High temperature, high magnetic, strong vibrate.1. Plug off the Nano receiver from USB port, and plug it on2. Move RF mouse within 50CM to Nano receiver, re-install the battery, Press any keyto reconnect, the above operation must be completed in 15 seconds.3. Mouse will ready to work after reconnection.
FCC StatementChanges or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.-- Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the followingtwo conditions (1)this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesiredoperation

Navigation menu