Eastern Times Technology DS-2538 Wireless Optical Mouse User Manual

Eastern Times Technology Co., Ltd. Wireless Optical Mouse

User Manual

User ManualWireless Bluetooth 3.0 MouseFCC ID: TUVDS-2538System requirements:zCompatible with standard MicrosoftzWindows O.S. and IBM (support USB device )Product FeatureBluetooth V3.0 Version, good compatibilityAvago A3000 sensor, high performance and low power3 switchable CPI: 1000/1500/2000IR light tracing technology, work with many of surfacePower switch design for save energy with multi-grade sleeping modeSupport Windows 2000/XP/Vista/7 ,Mac10.xPower supply 1 AA battery only, 2 AA battery is availableInstallationA, Battery installation1. Find Bluetooth mouse in package2. Install 1PCS AA battery into Mouse body Properly, for more weights for mouse , couldbe install 2PCS AA battery3. Put on power switch at the bottom of Mouse, LED indicator will keep flash for onesecond4. Success to installation of batteryB, Software installationSkip the step if you already have installed Bluetooth driver and Bluetooth dongle.Before match, make sure the Bluetooth dongle and driver is installed in your computer.C, How to match Bluetooth mouseFor example, match by Widcomm Bluetooth software1. Put on the connect switch on mouse bottom, LED connection indicator will flash2. Double click the icon on PC desk “ my Bluetooth place” ,addanewBluetoothdevicein menu, press “next” in setting guide,
3. Find Bluetooth mouse after scanning4．Click bluetooth 3.0 mouse，go next step, Bluetooth mouse match success, you can use your mousenow.
For example, match with Microsoft Bluetooth driver1. Put on the connect switch on mouse bottom, LED connection indicator will flash2. Double click the icon on right corner ,or you can find the Bluetooth icon in control panel, turnon the Bluetooth management, add a new Bluetooth device in menu, press “next” in setting guide,3. Find Bluetooth 3.0 mouse after scanning, click “next”4．Click “don’t use a passkey” then “next”5. The Bluetooth device will connecting and the match completely.The Mouse functions1.CPI adjustable functionWith 3 adjustable CPI 1000/1500/2000, factory setting is 1000CPI. Press the switch
button on top of Mouse can easy to adjust CPI. LED indicator will flash one timewhile it converting to 1000CPI, LED will flash twice while it converting to 1500CPI,LED will flash three times while it converting to 2000CPI.2. Low power indicationLED will flash in red when battery is getting out of power, remind that it needtochange the new battery3. Saving power mode and power switch offIf mouse is stay out of work for 10 minutes, it will turn to power saving mode, pressany button to restart it. You can switch off the mouse to save power.4. ReconnectionIf you press the connect button on mouse bottom by accident, Bluetooth willreconnection. It will be automatically reconnect after 10 minutes, or turn off powerand turn it on again, Bluetooth will connect immediately.If the Bluetooth connect was cut improperly, please reconnect it.If it is failed to reconnect, please delete the Bluetooth device and installit again, or cut the connection in the menu, reconnect it by software as thefollowing picture,。Remark:If the Bluetooth mouse doesn’t work properly, please try the following step,1. Choose branded Bluetooth dongle, it may caused compatibility problem for bad quality dongle2. Check the user manual for installation or check with local distributor for it.3. Make sure Bluetooth dongle is installed and workable in your computer.4. Make sure Bluetooth mouse work in 10 meters range with dongle.5. If you change a new dongle , it may need to match again with Bluetooth mouse.6. Check the battery , please replace a new one if it is out of power.7. Make sure the transmission speed is enough if you have other Bluetooth device working with yourcomputer.
FCC StatementChanges or modifications not expressly approved by the party responsible for compliance could voidthe user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-- Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the following twoconditions (1)this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation

Navigation menu