Eastern Times Technology DS2060F Wireless Optical Mouse User Manual RF Wireless Optical Mouse

Download:
Mirror Download [FCC.gov]
Document ID	792675
Application ID	fddhClpa17JBkwfhWik42g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.8kB (34938 bits)
Date Submitted	2007-05-16 00:00:00
Date Available	2007-05-16 00:00:00
Creation Date	2007-05-11 09:50:45
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-05-11 09:50:45
Document Title	Microsoft Word - RF Wireless Optical Mouse.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	liuxiang

RF Wireless Optical Mouse
User Manual
Welcome
Thank you for selecting this product! Your RF wireless optical mouse uses a newly developed RF
wireless technology 27MHz that replaces the traditional wired mouse. You can use your wireless
optical mouse freely and improve your efficiency and enjoy your beautiful life from the high
technology.，it added the re-chargeable function , it make you easy and comfortable.
Product Features
1.
Radio frequency 27MHz, enjoy your freely wireless space
2. It has 256 ID code, there is no interference even many mice being used at the same time.
3. Automatically save power sleeping functions, battery life be prolonged.
Systems Compatibility
IBM PC and Win98/Me/2000/XP
No need driver
USE Mouse
1. Please prepare for two PCS new AA recharge batteries
2. Press td pull the battery cover
3. Please insert the batteries correctly according to the polarity marks of the battery
grooves.
4. Pull the battery covers forward, when you hear ”crack” sound which shows the battery
cover is locked successfully.。
5. If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the
connector before your computer start-up.
6. For laptop, you may connect the receiver directly with the USB connector.
7, If you use desk PC, there is a little far between the case and your working surface, suggest
you use an extended USB cable to connect your case and the receiver, so you can place the
receiver on your working surface conveniently.
ID Setup
1. if the ID of RF mouse have been lost ,Please move the mouse near to the receiver
2. Press the ID button of the receiver by your hand, the receiver light begin to flash
3. Press the ID button of the mouse bottom with some hard and accurate object within 10
seconds, the receiver light will flash very fast, a few seconds later it will be on which
shows it is successfully to finish the digital transmission between the mouse and the
receiver. You may start to use it.
4. Working distance: within 1-2 meters.
Charge the chargeable batteries
1. Please open the cover of the 2 in 1 receiver.
2. Please put 2 PCS chargeable batteries into the charger and pay attention to the polarity.
3. The indication CHG is red while charging and Led will become green if finishing charge.
There is no any indication if batteries in wrong place or broken.
4. This charger uses USB or PS/2 5V power and uses slow charge means because in this
way the battery life can be prolonged. The charge time is approx. 10 hours.
This charger has auto-stop charging function and it refuses to charge the batteries which power is
higher than the original design value or the battery still can be used.
Attention Please
1. Please don’t make the mouse far away from the receiver in order to work more smoothly.
2. You’d better use the mouse on the white desk, in this way the batteries can be used longer
time. Please remove the batteries if the mouse will not be used for a long time.
3. This mouse with save power sleeping functions, please press any key or scroll the wheel to
wake up the mouse when it is sleeping.
4. If you want to take off the mouse power, please continue to press the ID switch of the
mouse bottom over 3 seconds. If you want to take on the power, please click the ID switch
once again.
5. The optical mouse will not work freely on a smooth desk ,glass, any reflecting surface, 3D
mouse pad.
6. No need to check the digital connection within 10 seconds when change the batteries, if
more than that please according to the above way to re-operate.
Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note
FCC Statement:: 1.This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause harmful interference,
and(2)This device must accept any interference received, including interference that may
cause undesired operation. 2.Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment. These
limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
--Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:05:11 09:50:45+08:00
Create Date                     : 2007:05:11 09:50:45+08:00
Format                          : application/pdf
Title                           : Microsoft Word - RF Wireless Optical Mouse.doc
Creator                         : liuxiang
Document ID                     : uuid:27c9b5fc-c3b9-4cf6-9133-44b26d5712c7
Instance ID                     : uuid:c231fb74-f9af-4243-9569-90a58867f147
Page Count                      : 2
Author                          : liuxiang

EXIF Metadata provided by EXIF.tools