Eastern Times Technology GFT-B007 Bluetooth Speaker User Manual
Eastern Times Technology Co., Ltd. Bluetooth Speaker
User manual
User Manual
Model: GFT-B007
Get Started
Congratulations! Thank you for choosing GFT-B007 Bluetooth speaker
Features
With AUX & Bluetooth input
The durable fabric material and rugged rubber housing.
Super portable Bluetooth speaker delivers powerful sound and robust bass.
Battery capacity: 2000mAH
Drive unit: 4Ω 5W x 2 + passive radiator x 1
Wireless pairing via Bluetooth 4.2
Connection diagram
Add the shell image and key function here
How to Use
1. General Function
Operation LED status
Power ON Blue LED Flashes 3 times with Power on Tone
Power OFF Power OFF Tone
Pairing Blue LED flashes
Standby Blue LED ON
Charging Red LED keeps lighting during charging, Red light OFF after charging
finished.
2. Basic Buttons Operation
Power ON: Press power button for 3 seconds, Blue LED flashes, speaker turned ON with power ON tone.
Power OFF: Press power button for 3 seconds, Blue LED flashes, speaker turned OFF with power OFF tone.
Volume Adjust: Long press “+” key or “-“key
Play/Pause: Short press power button, music pauses, press it again, music continues.
Previous: Short press “-” key.
Next: Short press “+” key.
Answer call: Short press Power button, answer the incoming call.
End call: Short press Power button, phone call ended.
Battery Capacity status: If connected speaker to IOS devices, IOS devices show the speaker battery power status on the upper right corner.
Charging the Speaker: New speaker has enough power for pairing, please charging it VIA USB cable for 3 hours after pairing, Red LED keeps lighting during
charging, Red LED light OFF after charging finished.
2. Pairing
Place speaker in one meters away with Bluetooth device, make sure the Speaker is power OFF, Press and hold Power button for 3 seconds to get ready for paring,
after Blue LED flash alternately, there will be a voice tone reminding entering paring mode, Activate Bluetooth function on your phone or devices and search for
GFT-B007, From the list of found devices on your Bluetooth devices, select GFT-B007 to connect it, then there will be a voice tone reminding connected.
Kit Contents
1. 1 X GFT-B007 Speaker
2. 1x Charging Micro USB cable
3. 1X user manual
Bluetooth Speaker
Warning
1. You must choose a qualified charger from a regular manufacturer to charge the speaker.
2. You must charge the ear-buds if it has not been used for more than 12 months.
Specification
Bluetooth Version: 4.2
Stand-by time: 20 hours
Playing time: About 8 hours
Wireless range: 10 meters
Bluetooth profiles: HFP,A2DP,AVRCP
Charging time: 3 hours
Battery capacity: 2000mA
Weight:780g
Dimension:78×63×200mm
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.